What does the English term 'ops' mean on a car?

Does the road adhesion decrease when driving in a tunnel?

Road adhesion does decrease when driving in a tunnel. The decrease in adhesion mainly refers to the impact of airflow within the tunnel on the vehicle, which reduces the friction between the tires and the road surface. Before entering a tunnel, there are traffic signs indicating width and height restrictions. Drivers must adhere to these warning signs. When passing through a culvert, it is necessary to reduce speed appropriately and check whether the vehicle's load height is within the permitted range indicated by the traffic signs. If necessary, get out of the vehicle to inspect and confirm before proceeding slowly. When approaching an uncontrolled single-lane tunnel, carefully observe both the inside of the tunnel and the entrance at the other end. If there are already vehicles inside the tunnel, take the initiative to stop and yield. If vehicles are about to enter from the other end, use high beams to signal. Once the oncoming vehicle enters the tunnel, stop immediately. If the other vehicle yields, proceed promptly. When within 50 meters of the tunnel entrance, turn on the headlights, width lights, and taillights, and check the speedometer to drive at the speed indicated by the tunnel entrance signs. Maintain a safe following distance to ensure sufficient space for avoiding hazards. Generally, a distance of over 100 meters should be kept when driving in a tunnel. For longer tunnels, follow the posted guidelines to maintain the appropriate safe driving distance. Avoid using high beams. Prolonged use of high beams at night can affect oncoming and preceding vehicles, as high beams can cause temporary blindness to drivers. The difference in light levels inside and outside the tunnel already makes it difficult for drivers to see, and the additional glare from high beams increases the risk of accidents. Therefore, high beams should be avoided.

8

0

Share

How to Deal with Clear Coat Scratches on Cars?

After being scratched, especially if the scratch reaches the primer, it is advisable to go to a repair shop for touch-up painting as soon as possible, and avoid exposing the car body to rain to prevent rust. It is recommended to keep a touch-up pen of the same color for minor scratches in inconspicuous areas. Although there might be some color difference, it saves a lot of expenses. For scratches, you can cleverly cover them with car stickers or decorative plates, which is both cost-effective and aesthetically pleasing. Many insurance companies now offer zero-deductible policies, which you may consider purchasing. This way, any scratches can be directly taken to the repair shop.

7

3

Share

Where is the cabin air filter located in the Trumpchi GS7?

The cabin air filter of the Trumpchi GS7 is located inside the glove compartment on the passenger side. Functions of the cabin air filter: 1. It can separate solid impurities such as dust, pollen, and grinding particles from the air; 2. It can absorb moisture, soot, ozone, odors, carbon oxides, SO2, CO2 in the air; 3. It has strong and long-lasting moisture absorption capacity. The Trumpchi GS7 is a five-seat mid-size SUV under GAC Trumpchi, with a body length of 4730mm, width of 1910mm, height of 1700mm, and a wheelbase of 2720mm. It is equipped with a 2.0T turbocharged engine, with a maximum power of 210 kW, maximum power speed of 5200 rpm, maximum torque of 320 Nm, and maximum torque speed ranging from 1750 to 4000 rpm. The engine is paired with a 6-speed automatic transmission.

15

5

Share

Can the 45Ah battery of Wuling Hongguang S be upgraded to 60Ah?

The 45Ah battery of Wuling Hongguang S can be upgraded to 60Ah. The functions of the battery are: 1. Provide starting current to the starter when starting the engine; 2. Power the in-car electrical appliances such as the audio system and lighting system when the car generator is not supplying power; 3. Assist in powering electrical equipment when the generator's output is insufficient; 4. Store part of the electrical energy when the generator's terminal voltage is higher than the battery's electromotive force; 5. Protect the car's electronic components and various electrical appliances. Wuling Hongguang S is a vehicle from SAIC-GM-Wuling, with exterior dimensions of 4390mm in length, 1660mm in width, and 1750mm in height, and a wheelbase of 2720mm.

8

0

Share

How to Connect Bluetooth in the 2019 Corolla?

Bluetooth connection method for the 2019 Corolla: Turn on Bluetooth in the settings of the central control screen, then activate Bluetooth on your phone. Set both the phone and the car's Bluetooth to be discoverable by nearby devices. Once detected, pair and connect. The Corolla is a compact family sedan under Toyota, with dimensions of 4630mm in length, 1775mm in width, and 1480mm in height, and a wheelbase of 2700mm. The Corolla is equipped with two engines: a 1.2-liter turbocharged engine and a 1.8-liter naturally aspirated engine. The 1.2-liter turbocharged engine delivers 116 horsepower and a maximum torque of 185 Nm, with a maximum power output at 5200 to 5600 rpm and maximum torque available from 1500 to 4000 rpm. The 1.8-liter naturally aspirated engine produces 98 horsepower and a maximum torque of 142 Nm, with maximum power at 5200 rpm and maximum torque at 3600 rpm.

6

3

Share

What Causes Severe Vibration When the Air Conditioning is Turned On in a Buick Excelle?

Buick Excelle experiences severe vibration when the air conditioning is turned on due to a dirty throttle body and insufficient engine power. Insufficient engine power: When the engine power is low, high idle speed indicates that the compressor is working. When the compressor is not operating, the idle speed drops, and the steering wheel does not vibrate. When the air conditioning is turned on during normal driving, the increased load from the compressor causes the engine speed to decrease, resulting in noticeable vehicle vibration. To address this issue, manufacturers typically install an engine idle speed boost system for air conditioning. This system increases the engine speed to the required range when the air conditioning compressor is active. Dirty throttle body: A dirty throttle body affects engine performance. Turning on the air conditioning under these conditions further increases the engine idle load, leading to steering wheel vibration. Cleaning the throttle body can prevent this issue. The vibration caused by air conditioning use, based on current vehicle conditions, is likely due to a dirty throttle body. It is recommended to have it cleaned at a repair shop. According to current vehicle control technology and maintenance cases, this is a common issue. Throttle carbon buildup is primarily caused by the engine control unit's characteristics, as well as factors such as low temperatures, low-speed driving, short-distance trips, and frequent starts. The noise from the air conditioning system is normal compressor operation, and no other issues are likely present. The engine drives the air conditioning compressor to provide cooling, which is a heavy load for the engine. When the air conditioning is turned on, the engine must also power the compressor, leading to noticeable power loss and increased vibration. This effect is more pronounced at idle speed. Increasing the idle speed slightly may improve the situation, though it will result in higher fuel consumption.

19

2

Share

What does the English term 'ops' mean on a car?

Does the road adhesion decrease when driving in a tunnel?

How to Deal with Clear Coat Scratches on Cars?

Where is the cabin air filter located in the Trumpchi GS7?

Can the 45Ah battery of Wuling Hongguang S be upgraded to 60Ah?

How to Connect Bluetooth in the 2019 Corolla?

What Causes Severe Vibration When the Air Conditioning is Turned On in a Buick Excelle?

What is the gear explanation for the Volkswagen Sagitar automatic transmission?

What are the vehicle requirements for Huaxiaozhu?

Does the new Sylphy come with daytime running lights?

Why can't the USB port in the Lingpai play music?