What does the English display on the Haval H6 screen mean?

What is the difference between a tachometer and an odometer?

Here are the differences between a tachometer and an odometer: 1. Position: Generally, the tachometer is on the left side and the speedometer is on the right. 2. Markings: The tachometer is marked from 0-6000 RPM, while the speedometer is marked from 0-220 km/h. Below is additional information: 1. Position: The odometer (mileage meter) is located below the tachometer and displays the distance traveled in numerical form. 2. Significance: The engine's RPM relates to the number of work cycles per unit time or the effective power output of the engine, meaning the engine's effective power varies with RPM. Therefore, when stating the engine's effective power, the corresponding RPM must also be specified.

9

1

Share

What Causes Auto Hold Failure?

Auto hold failure is caused by a malfunction in the ABS pump. Below is an introduction to related content: 1. Auto Hold: The foreign term for auto hold is AUTO-HOLD, which refers to an automatic braking function. When this function is activated, such as when stopping at a traffic light, it eliminates the need to pull the handbrake, simplifying operations by avoiding the use of the handbrake or electronic parking brake. For automatic transmission models, it also reduces the need for frequent shifting between D to N or D to P. 2. Precautions: Regardless of the situation when parking, it is essential to develop the habit of pulling the handbrake lever tightly when leaving the vehicle. When using the handbrake, the lever must be pulled tightly; otherwise, it is easy to forget to release it when starting, which can lead to severe wear on the rear brake pads if the vehicle is forced to move.

3

5

Share

What Causes Powertrain Failure?

When pressing the accelerator, you may notice insignificant acceleration and insufficient power. This condition most commonly occurs when the engine is overheated or overcooled, or when there is a lack of engine oil. Below are detailed explanations: 1. Power reduction: While driving, you may distinctly feel that the engine's acceleration is not significant when stepping on the accelerator, accompanied by a noticeable drop in power and audible noises. Possible causes include the engine being too cold or too hot, or lacking oil. Generally, when these symptoms appear, potential issues should be considered from aspects such as ignition wires, fuel filters, fuel pumps, air filters, gasoline, spark plugs, and carburetors. First, check if the air filter needs replacement, if the spark plugs have reached the end of their service life, if the ignition coil is damaged, or if there is excessive impurity in the gasoline. The fuel pump should also be inspected. 2. Deceleration or acceleration: The engine may emit a whirring sound, which changes with the engine's RPM. Possible reasons include insufficient power steering fluid—refill if necessary; potential damage to the generator's bearings; or similar noises caused by malfunctions in the water pump or power steering pump.

2

5

Share

What are the causes of unstable idle speed in the Malibu?

The unstable idle speed issue in the Malibu may be caused by factors such as low ignition energy leading to shaking, improper air-fuel mixture causing vibrations, malfunctioning coolant temperature sensor resulting in instability, or uneven cylinder performance causing tremors. Below is relevant information: 1. Overview: The SAIC-GM Chevrolet Malibu XL was officially launched on February 27, 2016, with the hybrid version released on September 9. The Chevrolet Malibu XL is a business vehicle under the Chevrolet brand, equipped with 1.3T and 2.0T engines to meet the demands of business receptions. 2. Additional Information: As Chevrolet's flagship mid-to-high-end sedan, the 2019 Malibu XL is built on GM's most advanced global mid-to-high-end vehicle platform, fully incorporating GM's next-generation drivetrain system developed with intelligent driving technology, world-leading smart manufacturing, and high-standard global supply chains.

3

0

Share

What are the reasons for the slow acceleration of the Mazda6?

The slow acceleration of the Mazda6 may be caused by issues such as the throttle, transmission, worn friction plates, or other faults. It is recommended to have it checked at a 4S shop. Below is some relevant information about the Mazda6: 1. Overview: The Mazda6 is the latest product launched by Mazda in the 21st century, introduced as a mid-to-high-end sedan at the Tokyo Motor Show in 2001. Since its launch, it has won over 30 awards in 20 countries worldwide. 2. Selling Points: With its solid chassis performance and top-tier handling, it has earned the reputation of 'King of Corners.' Its handsome exterior and excellent safety protection level give the Mazda6 a competitive edge in market positioning and among its peers.

1

3

Share

What are the consequences of an engine shutting down automatically due to lack of water?

Running a car without water in the radiator can cause the engine to overheat and damage its internal components. Here is a detailed explanation: 1. No water in the radiator: Running out of water in the radiator is very serious. Lack of water in the car's radiator can cause the engine to overheat, damaging its internal parts and even leading to complete engine failure. If the car's radiator is out of water, you must stop driving immediately. Continuing to drive without water in the radiator will cause the engine temperature to rise excessively, preventing normal oil film formation between parts. In mild cases, this can cause cylinder scuffing or bearing damage, while severe cases can result in total engine failure or even complete destruction. 2. Cylinder: The temperature inside the cylinder will rise rapidly. If the excess heat is not dissipated promptly and high-load driving continues, the strength of components such as pistons, piston rings, and connecting rods will decrease, potentially leading to deformation. These parts may no longer withstand normal loads, and the normal gaps between components will be disrupted, preventing proper oil film formation. Mild cases can cause cylinder scuffing or bearing damage, while severe cases can lead to complete engine failure or destruction.

14

0

Share

What does the English display on the Haval H6 screen mean?

What is the difference between a tachometer and an odometer?

What Causes Auto Hold Failure?

What Causes Powertrain Failure?

What are the causes of unstable idle speed in the Malibu?

What are the reasons for the slow acceleration of the Mazda6?

What are the consequences of an engine shutting down automatically due to lack of water?

What kind of engine oil should be used for Mazda 3 Axela?

What is the Difference Between Antifreeze and Water?

What does 342 on the valve tappet represent?

Is a Rear-Ended and Repaired Car Sturdy?