What does the engine type approval number mean?

1 Answers
LaZachary
07/29/25 1:10pm
It is the code on the vehicle type approval certificate. Below are the relevant explanations: 1. The first digit code: CN stands for China. 2. The second digit code: ZC is the code for compression ignition engines (mostly diesel engines), while QQ corresponds to spark ignition engines using gaseous fuels (ordinary gasoline engines). There are also very few CJ codes, followed by the third and fourth digit codes, and then a series of numerical values. 3. Advantages: The biggest advantage of a turbocharger is that it can significantly increase the engine's power and torque without increasing the engine displacement. Generally, the power and torque of an engine equipped with a turbocharger can increase by 20%-30%.
Was this review help?
4
4
Share
More Forum Discussions

What are the penalties if a vehicle fails its annual inspection and is caught by traffic police?

For vehicles that do not undergo annual inspection on time, besides compromising driving safety, a penalty of 3 points will be recorded for overdue inspection. For any traffic accidents caused by vehicles that have not undergone annual inspection on time, the involved party will bear full or primary responsibility, and the insurance company will not be liable. If a motor vehicle fails to obtain the inspection qualification mark for three consecutive inspection periods after the expiration of the inspection validity period, it will be forcibly scrapped.
18
1
Share

How to Deal with Mold in a Flooded Car?

In addition to using the air conditioning for dehumidification, it's best to purchase a simple dehumidifier box to prevent interior components from getting damp overnight. Also, placing a roll of toilet paper inside the car can help. After summer rains, due to factors like temperature, various bacteria and germs can easily proliferate, making it especially important to disinfect and sterilize the interior space of the car. Be careful to prevent cleaning agents from seeping into electrical equipment such as CD players, speakers, and radios, which could corrode the electronic components.
5
1
Share

What are the reasons why a moped won't start?

The reasons why a moped won't start include: 1. The moped's battery is low on power, causing it not to start. 2. The moped's starter motor is broken, making it impossible to start. 3. The moped has run out of fuel, causing it not to start, etc. When encountering the above issues, you can go to a moped repair shop to specifically check what the problem is. If you need to diagnose the root cause yourself, the operation methods are as follows: 1. Check if the starter motor is turning. If it's not turning, inspect whether the starter motor's circuit is open. 2. If the starter motor is turning but the moped won't start, it might be an engine issue. Check the seal between the cylinder block and cylinder head, the tightness of the valves, the wear of the piston rings or cylinder block, etc. 3. Check if the negative pressure rubber tube connected to the throttle is aged, cracked, or leaking, if the three-way fuel tank switch is damaged, if the carburetor fuel filter is clogged, if the fuel line is clear, or if the vacuum diaphragm is ruptured. 4. Also, check if the air filter is clogged or try removing the air filter and attempt to start the moped again.
13
2
Share

What to Do When the Car Interior Gets Wet?

After the seats get wet, use a damp towel along with a neutral or alkaline cleaning product to gently wipe the surface of the seats, removing any stains. After cleaning, use a softer towel to dry the surface moisture, then allow the seats to air dry naturally. During the drying process, avoid using a hairdryer or exposing them to direct sunlight, as this can damage the leather.
20
4
Share

What to Do If You Have Poor Car Control and Can't Tell If the Car Body Is Straight or Not?

Steer straight by keeping the steering wheel level and stationary, but first make sure the steering wheel is properly aligned. If the car drifts to one side, slightly turn the steering wheel in the opposite direction. After understanding the key points for keeping the car straight with the steering wheel, the next step is to learn to find suitable reference points on the road. It's been observed that many beginners tend to drift off course when driving on wide roads. The reason is the excessive space and broad field of vision.
11
4
Share

What to Do When the Rear Wheel Falls into a Ditch?

If the car is stuck in such a ditch, you can use the jack from the trunk and find a thick, flat wooden board nearby to place under the wheel in the ditch, then slowly drive out. This is the safest and most professional approach, regardless of the ditch's depth. It is also quite convenient. Moreover, it allows you to move the car out without damaging the chassis. This situation usually occurs when the car is stuck in a relatively deep ditch. For safety and to minimize damage, it is best to take this measure.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.