What does the engine light on the dashboard mean?

1 Answers
VanMaggie
07/29/25 4:15pm
The engine light on the dashboard indicates an engine malfunction. Possible causes include: the need to replace the air flow sensor or oxygen sensor, spark plugs or ignition coils, unclean engine cylinders, carbon deposits causing engine knocking, poor combustion state, or poor fuel quality. The specific cause needs to be diagnosed by reading the fault code with a specialized computer at an after-sales service center. Solutions: 1. There are several ways the engine fault light can illuminate: steady yellow light, flashing yellow light, steady red light, or flashing red light. If the red light is on, go to a 4S shop immediately for inspection and repair as the fault is severe. If the yellow light is on, the fault may not affect driving, but it should still be checked as soon as possible. 2. The car can read the fault code through the OBD interface using a computer.
Was this review help?
13
0
Share
More Forum Discussions

What are the differences between Porsche 2.9t and 3.0t?

The differences between Porsche 2.9t and 3.0t: The 3.0T is only a V6 single-turbocharged engine, while the 2.9T engine has an additional turbocharger, and the overall reinforcement strength of the engine is also greater, so its horsepower is 100 higher than that of the 3.0T. Below is a related introduction to Porsche: Exterior design: More distinctive, with sleek and dynamic body proportions, sharp sports car contours, sporty side wings, and smooth rooflines, highlighting the characteristics of a pure Porsche. The four-point LED daytime running lights, optimized front bumper design, and enlarged air intakes are the prominent features of the new Panamera's front face. Body side: The typical Porsche "flyline" further demonstrates its close connection with the 911. The rear of the car is a major highlight of the new Panamera 4S, with three-dimensional LED taillights featuring integrated four-point brake lights, giving the vehicle a unique nighttime effect. Interior: The interior design further emphasizes its romantic sporty style. The three-spoke leather sports steering wheel integrates: steering wheel heating control, audio control, cruise control, in-car Bluetooth phone control, trip computer control, central control screen control, etc.
9
3
Share

How to Remove the Maintenance Reminder on the Lynk & Co 03?

To remove the maintenance reminder on the Lynk & Co 03, adjust the display interface to the remaining maintenance mileage screen, then press and hold the button on the end of the wiper stalk. The screen will prompt the remaining mileage to change to 5000 km. Continue holding the button until the numbers stop flashing, and the reminder will be cleared. Here is more information about the Lynk & Co 03: 1. The Lynk & Co 03 is the brand's first sedan product and the first sedan built on the CMA (Compact Modular Architecture) platform. It was officially launched on October 19, 2018, at the Fuji International Speedway in Japan. 2. The Lynk & Co 03 is powered by a 1.5TD high-efficiency engine from the Drive-E series. The turbocharger engages at 1000 rpm, delivering 150 N·m of torque. At 1500 rpm, the engine reaches its maximum torque of 265 N·m. The turbo responds quickly, providing excellent low-speed responsiveness, making hill climbing and overtaking easier. The 0-100 km/h acceleration time is just 7.9 seconds.
14
4
Share

What are the reasons for a sudden inability to accelerate while driving on the highway?

The reasons for a sudden inability to accelerate while driving on the highway include blockage in the fuel system, ignition system failure, and a dirty throttle position sensor. Solutions for blockage in the fuel system: 1. Directly add a fuel system cleaner to the fuel tank. This is the simplest method, but the effect is not long-lasting, and the cleaning is not thorough. It is suitable for vehicles with low mileage. 2. Use a "drip cleaning" method. This can clean both the fuel system and the carbon deposits on the valves, and it is the method generally recommended by auto repair shops. 3. Use a no-disassembly cleaning machine. By connecting the engine's fuel inlet and return pipes to the cleaning machine's corresponding pipes with special adapters, a closed loop is formed. This method is convenient and quick, but it only cleans the fuel injectors and not the carbon deposits on the valves. However, for cleaning the fuel system alone, it is very effective and a good method. The fuel filter should be replaced every two maintenance cycles. Solutions for ignition system failure: Connect an ignition tester and adjust the ignition timing to the specified value.
11
4
Share

What is the fuel tank capacity of the Baojun RC6?

The fuel tank capacity of the Baojun RC6 is 50 liters. In the same class, the Yixuan MAX 2021 1.5T Super Dad Edition has a fuel tank capacity of 52 liters, and the Besturn B70 2022 2.0T also has a fuel tank capacity of 52 liters. Maintenance tips for the fuel tank are as follows: Drain accumulated water and sediment from the fuel tank, and check for any oil leaks at the fuel pipe connections and switches. For fuel tank caps equipped with air valves and vapor valves, also check that the ventilation holes are clear. The filter screen at the fuel filler inlet should be kept intact to prevent impurities from entering the tank during refueling, which could clog the fuel lines. The sealing gasket on the fuel filler cap should also be in good condition to prevent fuel from spilling out while driving. If the owner wants to check the remaining fuel level, they can observe the fuel gauge on the right side of the instrument panel, which is marked with E and F. When the needle is close to E, it indicates that the fuel is running low, and when it is near F, it means the fuel level is sufficient.
19
0
Share

What aspects should be paid attention to when using the car air conditioning system?

When using the car air conditioning system, the following points should be noted: 1. When the air conditioning has been in a non-use state for a long time, check the belt tension before the initial startup; 2. After prolonged use of the air conditioning system, perform a dust removal and sterilization treatment on the system; 3. Do not turn off the fan immediately when turning off the air conditioning. After turning off the AC switch, let the fan run for an additional one or two minutes to blow away the condensed water on the evaporator, preventing the evaporator from becoming moldy and avoiding the generation of odors. Poor air conditioning performance is the most common issue, and possible causes include: 1. Poor heat dissipation due to external dirt clogging the radiator, which can be resolved by cleaning the condenser; 2. The electric fan not working, requiring inspection of the relevant wiring and fan motor; 3. Issues with system pressure, as both excessively high or low system pressure can lead to poor air conditioning performance.
18
5
Share

What are the differences between Lexus ES and LS?

Lexus ES and LS are not in the same vehicle class. The ES is a mid-size luxury sedan, while the LS is a full-size luxury sedan. Additionally, the powertrains used in the ES and LS are different. The LS is equipped with a 3.5-liter naturally aspirated V6 engine, whereas the ES lineup exclusively uses four-cylinder naturally aspirated engines. The ES is available with two engine options: a 2.0-liter naturally aspirated engine and a 2.5-liter naturally aspirated engine. Below are the specific differences: Engine: The 2.0-liter naturally aspirated engine delivers 173 horsepower and 208 Nm of maximum torque. This engine reaches its peak power at 6,600 rpm and achieves maximum torque between 4,400 and 5,200 rpm. It features VVT-ie technology, hybrid injection system, and an aluminum alloy cylinder head and block. This engine is paired with a CVT transmission. The 2.5-liter naturally aspirated engine produces 207 horsepower and 243 Nm of maximum torque, with peak power at 6,600 rpm and maximum torque between 4,000 and 5,000 rpm. It also incorporates VVT-ie technology, hybrid injection system, and an aluminum alloy cylinder head and block.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.