What does the elimination of the TPWS fault in the Toyota Levin mean?

How to replace the window regulator of Magotan?

Replacing the window regulator of a Magotan requires visiting a 4S shop to have it replaced by professional maintenance personnel, as the structure of the regulator is relatively complex, and self-replacement may easily lead to issues. Before replacing the window regulator, it is necessary to remove the car door panel and tear off the waterproof membrane on the door, after which the window regulator can be seen. In terms of exterior design, the Magotan features a resolute V-shaped front grille that exudes stability and grandeur, dynamic and stylish streamlined body lines, and exquisite yet simple LED taillight designs that embody the perfect combination of technology and art. Its waistline maintains the classic 'diamond proportion,' being refined and smooth, while maximizing interior space under the premise of moderate length, width, and height dimensions.

13

1

Share

What are the differences between the Sagitar and the Lavida?

The differences between the Sagitar and the Lavida are: 1. Different powertrains: The Sagitar is equipped with a 1.2L and 1.4L turbocharged engine; the Lavida comes with a 1.5L naturally aspirated engine, as well as 1.2L and 1.4L turbocharged engines. 2. Different configurations: The Sagitar features rear air vents, daytime running lights, cruise control, and a leather steering wheel; the Lavida includes a tire pressure monitoring system, rear parking sensors, auto hold, and hill start assist. 3. Different body dimensions: The Sagitar measures 4753mm in length, 1800mm in width, 1462mm in height, with a wheelbase of 2731mm; the Lavida measures 4605mm in length, 1765mm in width, 1460mm in height, with a wheelbase of 2610mm.

1

Share

What is the production period of China III vehicles?

China III vehicles refer to those manufactured between 2008 and 2011. Below are the implementation timelines for China III and China IV standards: 1. China III: The China III standard was officially implemented on July 1, 2008, marking the "starting point" for China III. 2. China IV: The China IV standard came into effect on July 1, 2011, serving as the "starting point" for China IV. Here's a brief introduction to China III: (1) The China III standard represents China's third-stage vehicle emission standard. (2) The national third-stage emission standard is equivalent to the Euro III emission standard, meaning the exhaust pollutant levels match Euro III requirements, with the key difference being that new vehicles must be equipped with an OBD (On-Board Diagnostics) system. (3) To consistently meet the China III emission standards, vehicles must incorporate technical measures that ensure pollutant emissions comply with China III requirements, while also using fuel that meets Euro III standards.

17

2

Share

Where is the car engine located?

The engine number is stamped on the left side of the engine, near the flywheel. Precautions for using a car engine are as follows: 1. Avoid coasting in neutral: The engine itself has a fuel-cut function during deceleration, and coasting in neutral is not conducive to fuel economy. 2. Pay attention to observation while using the vehicle: If oil is found on the ground, determine whether there is an engine oil leak and promptly communicate with the car 4S store to eliminate potential safety hazards. 3. For vehicles equipped with a turbocharger, do not turn off the engine immediately after high-speed driving or climbing a slope: Let it idle for 10 minutes before shutting it off. Vehicles with turbochargers accumulate carbon deposits several times faster than naturally aspirated vehicles. 4. Replace the brake fluid promptly if it is contaminated with water or impurities: When water is mixed into or absorbed by the brake fluid, or if impurities or sediments are found, the brake fluid should be replaced or carefully filtered. Otherwise, it may lead to insufficient braking pressure, affecting braking performance.

10

1

Share

What causes the sunroof rattle in the Corolla 1.2T?

The causes of sunroof rattle in the Corolla are: 1. Mainly due to gaps between the sunroof and contacting components, which can be resolved by applying adhesive tape or 3M tape. 2. Other possible causes include dirt in the sunroof sliding rails, damaged or aged rubber seals around the sunroof, or loose components. 3. If no issues are found during external inspection, applying lubricant to the sunroof sliding rails may help. If the problem persists, professional repair is recommended. Additional note: During car washing, avoid directing high-pressure water jets at the rubber seals, as this may deform them and allow water ingress, while also significantly damaging the seals.

9

4

Share

Where is the windshield washer fluid located in the Geely Binyue?

Geely Binyue's windshield washer fluid is filled at the filling port on the left side of the engine compartment. Windshield washer fluid, also known as windshield cleaning fluid, mainly consists of: water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants. The functions of windshield washer fluid are as follows: 1. It keeps the front windshield transparent while driving; 2. It prolongs the life of the windshield and wipers; 3. It prevents the windows from icing up in winter; 4. It prevents static electricity on the windows. Additional information: Taking the 2020 Geely Binyue as an example, it is a compact SUV with body dimensions of: length 4330mm, width 1800mm, height 1609mm, a wheelbase of 2600mm, a fuel tank capacity of 45 liters, and a body weight of 1310kg.

9

1

Share

What does the elimination of the TPWS fault in the Toyota Levin mean?

How to replace the window regulator of Magotan?

What are the differences between the Sagitar and the Lavida?

What is the production period of China III vehicles?

Where is the car engine located?

What causes the sunroof rattle in the Corolla 1.2T?

Where is the windshield washer fluid located in the Geely Binyue?

Is the Volkswagen Magotan equipped with independent suspension?

What is the reason for the humming sound after replacing the bearing on the Sagitar?

Is the Bora a B-segment car?

What are the reasons for the fault light of China V diesel engine being on?