What does the Elantra SMART mode mean?

2 Answers
Nigel
07/29/25 3:32am
Elantra SMART mode is an intelligent driving mode. The following is an introduction to the Elantra: 1. Dimensions: The length, width, and height are 4495mm, 1720mm, and 1425mm respectively. 2. Exterior: The Elantra's exterior design is immediately noticeable. The overall body appears gentle and refined, but the redesigned front face gives it an aggressive look. Two prominent ridges on the engine hood extend forward to the small yet protruding grille, creating a strong sense of forward momentum. 3. Interior: The interior lines of the Elantra are relatively simple, with a beige color scheme that gives a fresh and clean feel. The center console and door armrests are accented with matte metallic trim panels, adding a touch of modern style.
Was this review help?
2
5
Share
McEvelyn
08/12/25 7:22am
In the modern Elantra, I've always felt the Smart mode is like an intelligent tuner, instantly adapting to my driving habits. When crawling through city traffic at red lights, it silently switches to Eco mode with softened throttle response to save fuel. But the moment I hit the accelerator on highways, it instantly shifts to Sport mode, delivering explosive power and exhilarating acceleration. This thoughtful design eliminates manual toggling between Eco and Sport modes, making long drives more effortless. Particularly in urban gridlock, its seamless transitions prevent jerky movements – a game-changer for daily commuters like me, optimizing both performance and battery longevity.
Was this review help?
4
2
Share
Expand All
More Forum Discussions

Does exposing a car to direct sunlight in summer have any impact on the vehicle?

Exposing a car to direct sunlight in summer does have an impact on the vehicle. The effects include: 1. It can trigger the release of pollutants from various sources, which may become carcinogenic over time; 2. UV rays can accelerate the aging of plastic parts, rubber components, and paint. Methods to prevent car exposure to sunlight: 1. Park the car in a shaded area; 2. Allow the interior to ventilate with the outdoors; 3. Use a sunshade to cover the front of the car. Summer tire maintenance tips: 1. Regularly remove stones or debris from the tread grooves to prevent deformation of the tire crown; 2. Prevent tire blowouts; 3. Check if the tire pressure is within the standard range, neither too high nor too low; 4. If frequently driving on highways, ensure regular tire rotation.
12
1
Share

What Does Japanese Car Mean?

Japanese cars refer to vehicles produced in Japan or manufactured by Japanese brands in other regions. Major brands include: Toyota, Nissan, Honda, Subaru, Mazda, Mitsubishi, Isuzu, Suzuki, etc. Taking the Toyota Camry as an example, its body dimensions are 4885mm in length, 1840mm in width, and 1455mm in height, with a wheelbase of 2825mm, and it features a front-engine, front-wheel-drive layout. The Toyota Camry is equipped with a 2.0L naturally aspirated engine paired with a CVT continuously variable transmission. This engine delivers a maximum power of 131kW and a peak torque of 210Nm. Additionally, the engine incorporates hybrid injection technology and utilizes an aluminum alloy cylinder head and block.
8
1
Share

How to Stop at Traffic Lights While Driving a Manual Transmission Car?

Manual transmission car stopping method at traffic lights: First release the throttle and let the vehicle's weight drag to decelerate, then immediately downshift according to the speed, press the clutch, then brake, shift to neutral, and pull up the handbrake. When the light turns green, press the clutch fully with your left foot, step on the brake with your right foot, shift into first gear, gently apply throttle with your right foot, lift the clutch to the semi-engaged position with your left foot, give a little more throttle with your right foot, then slowly release the clutch with your left foot to start moving. Manual transmission gear indicators show 1, 2, 3, 4, 5, R, while automatic transmission gear indicators show P, R, N, D, S, L, M. Manual transmission cars require manual gear shifting for starting, accelerating or decelerating, while automatic transmission cars only need deeper throttle for higher speed and lighter throttle for lower speed, without manual shifting or frequent clutch operation with the left foot.
12
5
Share

How to reset the tire pressure warning light on Volkswagen Bora?

Method to reset the tire pressure warning light on Volkswagen Bora: First, locate the SET button marked either in front of the gear lever or on its right side. Turn on the vehicle's ignition, then press the SET button and hold it for three seconds. The tire pressure indicator light on the dashboard will automatically turn off. The Bora's tire pressure monitoring system activates automatically, functioning to continuously monitor the tire pressure in real-time while driving. It alerts the driver in case of tire leaks or low pressure to ensure driving safety. The Volkswagen Bora has a body length of 4663mm, width of 1815mm, height of 1462mm, and a wheelbase of 2688mm. It is equipped with a 1.2T turbocharged engine paired with a 7-speed dual-clutch transmission. This engine delivers a maximum power of 85kW and a maximum torque of 200Nm.
9
2
Share

Is It Advisable to Buy a Car with a Replaced Radiator Support Frame?

It is acceptable to purchase a car with a replaced radiator support frame. If only the radiator support frame or some energy-absorbing collision components are damaged and subsequently replaced, and the overall condition of the vehicle remains good without any damage to structural components like the frame rails, there should be no safety hazards or impact on driving performance. Such a vehicle falls within an acceptable range, making it a viable purchase. Methods to check if the radiator support frame has been replaced include: 1. Inspect for any deformation, rust, or signs of disassembly; 2. Check for the presence of original manufacturer markings; 3. Examine whether the mounting holes or locating holes are deformed; 4. Look for any signs of breakage, cutting, or re-welding.
5
4
Share

Should You Use Fog Lights or Hazard Lights in Heavy Rain?

In heavy rain, you should turn on the fog lights and may also activate the hazard lights. When visibility is reduced to only 50 to 100 meters, using fog lights alone is not safe enough. Activating both hazard lights and fog lights is necessary to ensure sufficient attention from surrounding vehicles, thereby enhancing the safety of your own and other vehicles on the road. Hazard lights should only be used in emergency situations or when temporarily stopping. Instructions for using fog lights: 1. When visibility is between 100 to 200 meters, you must turn on the fog lights, low beams, width markers, and taillights, maintaining a distance of at least 100 meters from the vehicle ahead. 2. When visibility is between 50 to 100 meters, activate the fog lights, low beams, width markers, and taillights, keeping a distance of at least 50 meters from the vehicle in front.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.