What does the ECD light indicate?

When did the China 6 vehicle emission standards come into effect?

From July 1, 2020, the China 6 emission standards for light-duty vehicles were implemented nationwide. Below is relevant information about China 6: Definition: The China 6 motor vehicle pollutant emission standards were established to implement the "Environmental Protection Law of the People's Republic of China" and the "Air Pollution Prevention and Control Law of the People's Republic of China," aiming to prevent pollution from the exhaust of compression-ignition and gas-fueled spark-ignition engine vehicles, protect the ecological environment, and safeguard human health. Proposal for Delay: The proposal to delay the nationwide implementation of the China 6 emission standards was mainly based on two considerations. First, due to the impact of the pandemic, there was concern about whether automakers could clear their existing inventory before the implementation of the China 6 standards. Second, the new China 6 standards involve particulate matter emission limits, requiring new vehicles to undergo relevant testing and verification. Since the resumption of work and production had not yet fully returned to normal, it was hoped that an appropriate delay would give automakers more time.

17

1

Share

How to Clean Carbon Deposits in Car Engine?

Engine carbon deposits are a normal occurrence that appears after prolonged use. Here are specific solutions for engine carbon deposits: Fuel Additive Cleaner: Fuel with added cleaners flows through the fuel supply system, using its chemical components to break down the adhesive substances inside the system, automatically removing carbon deposits from the valves and the inner walls of the engine cylinders, preventing the accumulation of adhesives and impurities that form carbon deposits. Manual Cleaning: The advantage of manual cleaning is that it doesn't require replacing filters or fuel lines. The method chosen depends on the severity of the carbon deposits. For valve carbon deposits, simply removing the intake manifold and using a regular cleaner or cloth to wipe is sufficient. For carbon deposits adhering to the engine cylinder walls, cleaning is generally difficult without disassembling the engine, which is relatively more complex. Disassembling the engine may affect its power performance and sealing, potentially causing the engine to malfunction or even damaging it. If there is a significant amount of carbon deposits inside the cylinder walls that fuel additive cleaners cannot remove, it's best to consult professional technicians at a 4S shop. Regular Cleaning: Regular vehicles should have carbon deposits cleaned every six months or 10,000 kilometers. 4S shops usually have professional cleaning equipment and cleaners. If you prefer to save money, you can buy two bottles of gasoline additive at the gas station while refueling and add them to the fuel tank, which also has some effect. However, if there is too much carbon deposit, it's difficult to clean thoroughly this way. It's best to go to a 4S shop for inspection and cleaning. In severe cases, the cylinder head may need to be removed for manual cleaning, which is the most thorough method.

6

2

Share

Where is the ETC installed?

ETC is installed in the middle position of the front windshield, directly behind the rearview mirror, to avoid obstructing the driver's view. The installation method for ETC is as follows: 1. Check the ETC card and OBD for any damage, press the anti-tamper button on the back of the OBD, the red light will briefly illuminate, and the OLED screen will display 'Label Invalid, Please Insert Card,' indicating the device is functioning properly; 2. Clean the front windshield, peel off the OBD protective film, stick it to the installation position, and press for 2 to 3 minutes; 3. Insert the ETC card with the front facing the driver and the back facing the windshield, placing the chip part into the electronic tag device.

1

Share

Where is the trunk switch located on a Volkswagen?

The location of the trunk switch in a Volkswagen depends on the model. Taking the Sagitar as an example, its trunk switch is located on the interior panel of the left front door. Pressing the button will open the trunk. The Sagitar is a compact car under the Volkswagen brand, with body dimensions of 4753mm in length, 1800mm in width, and 1462mm in height, a wheelbase of 2731mm, a fuel tank capacity of 50 liters, and a trunk capacity of 553 liters. The Sagitar is equipped with a 1.2L turbocharged engine, with a maximum power speed of 5000 rpm and a maximum torque speed ranging from 1400 to 4500 rpm.

16

2

Share

How to Drive a Manual Transmission Car for Beginners?

When learning to drive a manual transmission car as a beginner, you may often encounter some issues. Here is a detailed guide on how beginners can drive a manual transmission car: Before Starting: Since the car is equipped with a one-button start and hill start assist function. When starting, you can fully start the car in three steps. Press the button twice first, with an interval of a few seconds in between, to power up the car's electrical systems and allow the vehicle to perform a self-check. When pressing the button for the third time to start the engine, you need to press the clutch or brake (the start button will turn green), and then press the button again. At this point, the car is considered fully started. Starting the Vehicle: After the car is fully started, it's best to let it idle for about half a minute. Then, press the clutch, shift into first gear, and simultaneously press the foot brake with your right foot. Release the handbrake with your right hand, slowly lift the clutch until you feel the power being transmitted to the wheels, and then release the foot brake. At the same time, move your right foot to the accelerator and give it a little gas to start. For cars without hill start assist, the steps for starting on a slope are the same, except you need to lift the clutch higher to ensure a tighter connection between the clutch and the vehicle's transmission before releasing the foot brake. The amount of throttle needed depends on the steepness of the slope—the steeper the slope, the more throttle is required. While Driving: After the car starts moving (in first gear), when the speed reaches 15-20 km/h, shift into second gear. When the speed reaches 25-30 km/h, shift into third gear. At 35-40 km/h, shift into fourth gear, and when the speed exceeds 60 km/h, shift into fifth gear. During driving, whenever the speed reaches (or drops to) a certain range, adjust the gear accordingly. Note: When downshifting, don't release the clutch too quickly. While releasing the clutch, you should appropriately press the accelerator to match the engine speed with the gear before shifting, which helps prevent jerking. Slowing Down and Stopping: First, always press the brake, but you don't need to press it all the way (unless it's an emergency). Press the brake just enough to reduce the speed below a safe threshold (I generally consider 40 km/h safe), then press the clutch and shift into neutral. Apply the foot brake according to the actual situation. For normal stops, there's no need to press the brake all at once; just make sure to stop before the designated position.

5

0

Share

What is the body weight of the Volkswagen Bora?

Volkswagen Bora has a body weight of 1315kg, with body dimensions of: length 4663mm, width 1815mm, height 1462mm, wheelbase 2688mm, fuel tank capacity 50l, and trunk capacity 506l. It belongs to the compact car category. The Volkswagen Bora is equipped with a 1.2T turbocharged engine, delivering a maximum power of 85kW at 5000rpm, and a maximum torque of 200Nm. It is paired with a 7-speed dual-clutch transmission, featuring McPherson strut front suspension and torsion beam rear suspension.

4

5

Share

What does the ECD light indicate?

When did the China 6 vehicle emission standards come into effect?

How to Clean Carbon Deposits in Car Engine?

Where is the ETC installed?

Where is the trunk switch located on a Volkswagen?

How to Drive a Manual Transmission Car for Beginners?

What is the body weight of the Volkswagen Bora?

How Long Can a Spare Tire Generally Last?

How Long Before You Can Roll Down Windows After Applying Car Explosion-Proof Film?

How to Deal with Oversized License Plate Mounting Holes?

What Materials Are Inside Car Seats?