What does the 'e' in e92 gasoline mean?

What to Do When the Car Pulls to One Side?

The solution to a car pulling to one side is to perform a four-wheel alignment. During driving, the car may inevitably experience impacts, which can cause deviations in the wheel alignment after the tires are hit. The supporting components of the car's chassis may also undergo slight deformation due to bumps or vibrations. The four-wheel alignment primarily adjusts the relative position between the wheels and the chassis. For the front wheels, this includes caster angle, kingpin inclination, camber, and toe; for the rear wheels, it includes camber and toe. Situations that require a four-wheel alignment include: 1. The vehicle's driving performance is affected; 2. Damage to the chassis and suspension due to an accident; 3. Abnormal tire wear; 4. Components of the axle or suspension have been removed.

3

0

Share

What Are the Reasons for Strong Exhaust Smell Inside the Car?

There are several main reasons for a strong exhaust smell inside the car: 1. The car hasn't warmed up yet, and the smell will dissipate after warming up; 2. Incomplete combustion due to improper air-fuel mixture; 3. Carbon buildup or erosion on the spark plugs; 4. Leakage in the ignition wires; 5. Malfunctioning oxygen sensor, insufficient intake system pressure, or inadequate air intake. Methods to address the strong exhaust smell inside the car: 1. First, clean the carbon deposits. If the smell persists after cleaning, the vehicle should be inspected and repaired; 2. Open the car doors to eliminate odors inside the car. Regularly open the windows and doors to facilitate air exchange between the interior and exterior, allowing harmful gases inside the car to evaporate as quickly as possible.

13

5

Share

How to Check Tire Pressure on the Tire?

To check the tire pressure on the tire, you can use a tire pressure gauge or an air pressure gauge. First, ensure that the center line of the gauge's measuring port forms an angle of 90 to 180 degrees with the axis of the gauge body. When observing, align the pointer with the mirrored pointer; the value indicated by the pointer at this point is the pressure reading, accurate to one decimal place. When the measuring end of the pressure gauge is pressed firmly against the tire's valve stem, the gauge's pointer will deflect, and the indicated value is the tire's inflation pressure. The greater the internal pressure, the more the pointer deflects. Nowadays, more and more cars are equipped with tire pressure monitoring systems, which can display the tire pressure directly on the dashboard.

10

4

Share

How Many Times Can Temporary License Plates Be Applied For?

Temporary license plates can be applied for a maximum of 3 times, with the longest validity period being 30 days depending on local regulations. Additionally, new cars cannot use temporary plates for more than 15 days, and owners should promptly apply for official license plates from the vehicle management authority. Failure to do so may result in penalties after expiration. Temporary plates do not necessarily have to be applied for in person; they can be processed by someone else on behalf of the owner. When applying for temporary license plates for a vehicle, it is necessary to fill out the temporary driving registration form according to relevant requirements and submit the identity proofs of the vehicle owner and the agent, the whole vehicle factory certificate, the import certificate for imported vehicles, as well as the vehicle frame number and engine number.

6

4

Share

What are the penalties for running a red light once?

Running a red light means violating traffic signal regulations, which incurs corresponding fines and a deduction of 6 points per offense. Running a red light refers to the act of a motor vehicle violating the prohibition of passage during the red light phase at a signal-controlled intersection or road section, crossing the stop line, and continuing to move forward. Criteria for determining a red light violation: When collecting evidence of a red light violation, traffic authorities generally require at least three photos as proof: one before the vehicle crosses the stop line, one after crossing the line, and one entering the intersection. If the vehicle stops immediately after crossing the line and does not proceed further, the traffic management department will not consider it as running a red light. If the front or body of the vehicle has crossed the stop line when the light turns red, but the rear has not, stopping at this point will not result in a penalty. If you accidentally cross the line, do not attempt to accelerate and rush through or reverse significantly to avoid being caught by traffic cameras. Since video devices capture moving images, such actions can form a complete violation record. If the vehicle stops immediately after crossing the line and does not proceed further, the traffic management department will not consider it as running a red light. There is a three-second transition period between the yellow light and the red light. Traffic cameras operate 24/7 but only start capturing images when the red light turns on; they do not record during the yellow light phase.

16

4

Share

Which is faster for charging new energy vehicles, DC or AC?

When comparing DC and AC charging for new energy vehicles, DC charging is faster. This is because AC charging has a lower power output, resulting in longer charging times, but it causes less battery wear. In contrast, DC charging stations offer higher power output, enabling faster charging, but they also cause greater battery wear. The differences between AC and DC charging: AC charging stations require an onboard charger to charge the vehicle, while DC fast charging stations do not need this equipment. There is a significant difference in charging speed between the two. For example, a fully discharged pure electric vehicle (with standard battery capacity) takes about 8 hours to fully charge using an AC charging station, whereas a DC fast charging station can achieve the same in just 2 to 3 hours. Key precautions for charging electric vehicles are as follows: Master the correct charging time: Replenishing energy for pure electric vehicles takes longer. If using a home charging station, it takes nearly 8 hours to fully charge. Even with a fast charging station, it takes about 40 minutes to reach 80% capacity. It's important to develop a regular charging habit and avoid waiting until the battery level is too low before charging. Avoid overcharging or deep discharging the battery: Both overcharging and deep discharging can reduce battery lifespan. This applies to any product that uses batteries, including pure electric vehicles. Although battery packs are equipped with protection systems, frequently driving until the "red light" warning appears will inevitably affect the battery pack's longevity. Additionally, charging should be stopped immediately once the battery is full, similar to how you would charge a smartphone.

5

0

Share

What does the 'e' in e92 gasoline mean?

What to Do When the Car Pulls to One Side?

What Are the Reasons for Strong Exhaust Smell Inside the Car?

How to Check Tire Pressure on the Tire?

How Many Times Can Temporary License Plates Be Applied For?

What are the penalties for running a red light once?

Which is faster for charging new energy vehicles, DC or AC?

What Causes the Car Not to Start and the Brake Pedal to Be Hard to Press?

What is the penalty for driving at 65 km/h in a 50 km/h urban speed limit zone?

Can Pearl White Car Paint Be Repaired Without Color Difference?

Where is the first aid kit located in the Buick Verano?