What Does the Driving Test Subject 3 Include?

3 Answers
VanSawyer
07/29/25 12:30pm
Subject 3 road driving skills test includes 16 items: vehicle preparation, starting, driving in a straight line, shifting gears, turning left at an intersection, turning right at an intersection, changing lanes, passing through intersections, pulling over, crossing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making a U-turn, and driving at night. Below is a detailed introduction: Precautions for making a U-turn: Upon hearing the voice prompt "Please make a U-turn ahead," the candidate should turn on the left turn signal (for more than 3 seconds), observe the traffic behind through the (left) rearview mirror, and only after confirming safety, reduce speed, shift to a lower gear, and enter the U-turn area. When entering the U-turn area, observe the road conditions to the left and right, confirm safety, enter the driving lane normally, and turn off the left turn signal. Precautions for turning right at an intersection: Upon hearing the voice prompt "Turn right at the intersection ahead," turn on the right turn signal (for more than 3 seconds), then turn right into the driving lane following the guide arrow.
Was this review help?
7
0
Share
AdalynnMarie
08/13/25 11:54pm
I just finished the third driving test, and the exam content was quite comprehensive. The pre-drive preparation includes checking the seat, rearview mirrors, and seatbelt, followed by a simulated nighttime lighting operation test, covering things like switching between high and low beams. The actual driving part involves starting smoothly without stalling, maintaining a straight line while driving, shifting gears without hesitation, changing lanes with turn signals and checking mirrors, pulling over close to the curb without crossing the line, and slowing down at intersections, crosswalks, schools, and bus stops while observing and signaling. Left and right turns require proper use of turn signals, and meeting, overtaking, and U-turns must also be performed correctly. Throughout the process, the examiner gives instructions that you must respond to immediately. I was most afraid of the lighting test because it’s easy to make mistakes—I recommend practicing more to familiarize yourself with the test route. After passing the third test, I truly feel that the driving foundation is solid, and safety comes first.
Was this review help?
2
0
Share
Expand All
HannahFitz
10/09/25 4:10am
As a veteran driver with over 20 years of experience, I look back at the Subject 3 driving test as practicing fundamental skills. The content includes pre-drive vehicle checks, proper light adjustment, smooth starting to avoid rolling back, straight-line driving without deviation, smooth gear shifting, safe lane changing, parking within 30cm of the curb, and simulated nighttime lighting operations including switching between high and low beams. Key points like slowing down at intersections and crosswalks, checking blind spots, maintaining 20km/h speed limits in school zones, being cautious near bus stops, yielding during encounters, signaling for overtaking and lane changes, and completing U-turns in one go are emphasized. Subject 3 primarily tests safety awareness - these are daily essentials in actual driving. When I mastered these skills in my youth and now teach newcomers, I always stress these aspects: take it slow and steady.
Was this review help?
15
5
Share
Expand All
More Forum Discussions

Reasons for the clicking sound when just turning the steering wheel in reverse?

Most hydraulic power steering pumps exhibit this phenomenon. When turning the steering wheel, the power steering fluid cannot circulate smoothly when obstructed, resulting in this squeaking sound. It could be the noise from friction between the combination switch housing and the steering wheel. Try loosening the housing mounting screws and adjusting it. Below is information about hydraulic power steering pumps: 1. The automotive power steering pump refers to a component that helps improve and stabilize vehicle performance. 2. Its main function is to assist drivers in adjusting the vehicle's direction. Currently, all vehicles are equipped with power steering pumps, mainly including steering power pumps and brake vacuum booster pumps. 3. The electro-hydraulic power steering system overcomes the shortcomings of traditional hydraulic power steering systems. During low-speed, large-angle turns, the electronic control unit drives the electro-hydraulic pump to operate at high speed and output greater power, making it easier for drivers to turn the steering wheel.
3
5
Share

What does the car button mean?

Automotive car button refers to the vehicle itself, and its function is to quickly open the car system settings interface. Pressing this button allows the multimedia central control screen to directly switch to display the car system interface, where various vehicle settings can be adjusted, such as driving mode selection, seat and air conditioning adjustments, parking assistance systems, settings and services. The following are the functions represented by various buttons in the car: 1. The sel key is the menu selection confirmation button, usually located on the multifunction steering wheel. 2. The ok key has exactly the same function as the sel key, but some cars use sel while others use ok. 3. The ac button is the compressor switch, the full name is aircondition, which is the air conditioning cooling switch.
16
0
Share

What kind of engine oil is suitable for Toyota RAV4?

Toyota RAV4 is suitable for the original PurePlus 5W-40 engine oil, which should be changed every 5,000 kilometers. If you want better quality, you can use Mobil 1 full synthetic engine oil, which can also be mixed with any other engine oil. Alternatively, German Magic Red engine oil can also be used. Below is information about Mobil 1 5W-50: 1. Mobil 1 5W-50 is a 100% full synthetic engine oil formulated with patented anti-wear technology. Even under severe and harsh driving conditions, it provides excellent protection. Mobil 1 is also highly compatible with other conventional and synthetic engine oils. 2. 5W-40 engine oil means that it meets the viscosity requirements for both low and high temperatures. Due to its wide applicability, it has become a mainstream type of engine oil. 3. The "W" stands for "winter," indicating its use in winter. The number before the "W" represents the viscosity at low temperatures. The smaller the number, the better the fluidity at low temperatures and the stronger the cold resistance. The number after the "W" indicates the viscosity at 100°C. The larger the number, the higher the viscosity and the stronger the high-temperature resistance.
17
2
Share

What Happens If a Car Runs Out of Coolant?

A car without coolant lacks protection for the engine and radiator. Running low on coolant affects the radiator's heat dissipation, preventing proper cooling and disrupting the coolant circulation cycle. This can lead to overheating and, in severe cases, cause engine damage. In cold climates, it may also result in the engine or radiator freezing, leading to engine failure and rendering the vehicle inoperable. Precautions for adding coolant: 1. Do not use plain water as a substitute for coolant. 2. Avoid mixing coolants of different colors and specifications. 3. When switching coolant brands, try to drain the original coolant from the cooling system completely. 4. Regardless of the temperature, for the sake of cooling system efficiency and longevity, coolant should always be used. The theory that southern winters are mild and do not require coolant is incorrect.
5
5
Share

What are the categories of automotive air conditioning systems?

Categories of automotive air conditioning systems: 1. By driving method: independent and non-independent types. 2. By performance: single-function type and integrated heating/cooling type. 3. By control method: manual type and electrically controlled pneumatic regulation. 4. By control mode: fully automatic regulation and microcomputer-controlled fully automatic regulation. Below is information about modern automotive air conditioning systems: 1. The air conditioner can control the cabin temperature, capable of both heating and cooling air to maintain a comfortable cabin environment. 2. The air conditioner can remove humidity from the air. Dry air absorbs human sweat to create a more comfortable environment. 3. The air conditioner can intake fresh air, providing ventilation functionality. 4. The air conditioner can filter the air, removing dust and pollen from the air.
11
0
Share

What maintenance is needed after a car has run over 30,000 kilometers?

For a 30,000-kilometer maintenance, the recommended service items include changing the engine oil, oil filter, air filter, fuel filter, throttle cleaning, and replacing the spark plugs. Some 4S shops may suggest additional maintenance items, which you can consider based on your needs and actual conditions. Below is detailed information about the maintenance: 1. Changing the engine oil and oil filter is essential for a 30,000-kilometer maintenance. Under the harsh conditions of high temperature and pressure inside the engine, the shelf life of engine oil is significantly shortened, and its performance deteriorates. Over time, it can no longer effectively protect the engine. 2. The oil filter prevents impurities from mixing with the oil, which can cause oxidation, leading to sludge and clogging the oil passages. The engine oil and oil filter should be replaced simultaneously. 3. The air filter should be replaced every 10,000 to 15,000 kilometers, and the fuel filter every 30,000 kilometers.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.