···
Log in / Register

What Does the Driving Test Subject 3 Include?

4 Answers
Jaxon
07/24/25 11:40pm
Subject 3 of the driving test includes the road driving skills test and the safety and civilized driving knowledge test. The following are the specific details: Road Driving Skills: Vehicle preparation, lighting simulation test, starting, driving in a straight line, gear shifting operations, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, passing through pedestrian crossings, passing through school zones, passing through bus stops, meeting vehicles, overtaking, making U-turns, and nighttime driving. Safety and Civilized Driving Knowledge: Requirements for safe and civilized driving operations, knowledge of safe driving under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and knowledge of post-accident handling procedures.
Was this review help?
3
3
Share
HarperLee
08/10/25 10:39am
I remember the main focus of the Subject 3 driving test is practical driving skills, including pre-driving preparations, starting operations, driving straight, lane changing, and pulling over. Before getting in the car, you need to adjust the seat and mirrors to ensure a comfortable view. When starting, press the clutch, shift gears, release the handbrake, and start slowly to avoid stalling. When changing lanes, check the mirrors, use the turn signal, and avoid doing it too quickly or abruptly to prevent danger. Parking maneuvers like reverse parking and parallel parking are key and challenging points—you need to slowly control the steering wheel to align properly. Additionally, you must slow down at intersections, watch for pedestrians, and stop to yield at crosswalks, all of which test your reaction and judgment. During the test, stay calm, practice more, and get familiar with road conditions—it’ll make passing easier. In short, Subject 3 is a crucial stage for mastering driving basics and ensuring road safety, so take it seriously and don’t underestimate it.
Was this review help?
11
4
Share
Expand All
DiWeston
09/26/25 7:17am
When I took the driving test for Subject 3, it felt really challenging. The test included preparation for starting, light operations, driving straight, and parking maneuvers. After getting in the car, the first step was to check the dashboard to ensure there were no faults, then start the engine. When starting, pay attention to the coordination between the clutch and throttle to avoid jerking forward. When changing lanes, you must signal in advance, check the rearview mirror to ensure no cars are coming, and then move smoothly without hesitation. For parallel parking, control the distance well to avoid crossing the line, and for reverse parking, practice more to align properly and adjust the position slowly. During the test, there was also a simulation of a school zone where you had to slow down to 30 km/h and stop at crosswalks—these are all fundamental skills for safe driving. My personal experience is that practicing one hour daily for two weeks makes you proficient. During the test, stay calm and observe the details to pass smoothly.
Was this review help?
3
0
Share
Expand All
StElena
11/10/25 2:33am
The Subject 3 driving test evaluates practical driving skills, such as adjusting rearview mirrors after entering the car to ensure clear visibility, checking that lights are functioning correctly before starting, and operating without faults. After the vehicle starts, the test includes maintaining a straight and stable drive without swaying, and when changing lanes, you must signal in advance, check blind spots, and confirm safety before proceeding. Parking tests involve accurately pulling over to the curb, parallel parking into designated spots, and reversing into parking spaces, paying attention to boundary lines to avoid exceeding limits. At intersections, you must slow down, observe, and yield to pedestrians, stopping at crosswalks, with similar rules applying at bus stops. Throughout the test, safety awareness and quick reactions are assessed, such as correctly using high and low beams during night driving. Remembering these tips can make the test much easier—consistent practice is key, and don’t overlook the details.
Was this review help?
12
0
Share
Expand All
More Forum Discussions

Symptoms of a Bad Engine Mount?

Symptoms of a damaged engine mount in a car are as follows: 1. When the engine is idling, if you can feel significant vibration in the steering wheel, it may indicate that one of the engine mounts is damaged. 2. While the engine is idling, shifting into R or D gear, holding the brake for 10 seconds without moving, if the steering wheel shakes or the body vibrates abnormally, the engine and transmission mounts may be damaged. 3. Vibration during acceleration, causing resonance in a specific range, could be a sign of a damaged mount. 4. If there is oil leakage on the surface, it might indicate a damaged hydraulic engine mount.
17
4
Share

How many days after failing Subject 2 can I schedule the next attempt?

After failing Subject 2, you cannot immediately reschedule the test. The applicant needs to first pay the re-examination fee at the vehicle management office and wait for 10 days before retaking the exam. Relevant information about the driver's license examination is as follows: 1. Article 37 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" stipulates: Each subject can be taken once, and those who fail can retake it once. Those who do not participate in the retake or fail the retake will have their current examination terminated. The applicant must reschedule the examination, but for Subject 2 and Subject 3, the rescheduling must be done after 10 days. 2. For those who fail the Subject 3 safe and civilized driving knowledge test, the passed road driving skill test scores remain valid.
3
0
Share

Car Acceleration Shaking?

Car acceleration shaking may be caused by the following reasons: 1. Engine malfunction; 2. Insufficient cylinder pressure; 3. Half-shaft malfunction; 4. Fuel system malfunction; 5. Aging engine components; 6. Ignition system failure. Solutions for car acceleration shaking are as follows: 1. Replace filters: including oil filter, gasoline filter, fuel filter, and air filter. Replacing filters can improve filtration efficiency, reduce impurities, and make engine combustion more complete; 2. Clean carbon deposits: including spark plug carbon deposits, throttle carbon deposits, and cylinder carbon deposits.
6
5
Share

Audi A6L experiences jerking when shifting into reverse gear?

Audi A6L jerking when shifting into reverse gear: The automatic transmission may have a malfunction. Solution: It is recommended to visit an authorized 4S dealership for inspection and repair as soon as possible. More information about the Audi A6L is as follows: 1. The Audi A6L is a vehicle series developed by FAW-Volkswagen Audi based on the German new A6, serving as the successor to the A6. 2. The exterior design of the new-generation Audi A6L shows minimal overall changes, adopting a more innovative and youthful design on the existing foundation, featuring a new family-style front grille that closely resembles the current A8L. 3. The dimensions of the new Audi A6L are 5015mm*1874mm*1455mm (length*width*height), with a wheelbase of 3012mm.
13
5
Share

What does 6MT transmission mean?

It refers to a 6-speed manual transmission. The term MT stands for Manual Transmission, with its full English name being manual-transmission. The number 6 indicates that it has 6 manual forward gears. Manual transmissions are widely used, with 5MT and 6MT being more prevalent. Manual transmission is a gear-shifting device used to alter the speed and torque transmitted from the engine to the driving wheels. It enables the vehicle to achieve different traction forces and speeds under various conditions such as starting from a standstill, climbing hills, turning corners, and accelerating, while also allowing the engine to operate within a more favorable range. Introduction to Manual Transmission: Modern vehicle engines have limited ranges of speed and torque variation, but driving conditions vary greatly, requiring a wide range of changes in traction force and speed. For instance, when starting, a vehicle doesn't need high speed but requires greater traction force, whereas on highways, less traction force is needed but higher speed is desired. This demand characteristic of vehicles conflicts with the engine's speed-torque characteristics, and the transmission precisely resolves this contradiction. The functions of a manual transmission are: To change the gear ratio, expanding the range of torque and speed variations of the driving wheels to adapt to frequently changing driving conditions. To enable reverse driving by using the reverse gear while maintaining the engine's rotation direction. To interrupt power transmission with the neutral gear without turning off the engine, facilitating engine start-up, warm-up, idling, gear shifting, coasting, or temporary stops. To transmit the engine's power output to drive other mechanisms, such as winches in some vehicles or oil pumps in dump trucks. Compared to hydraulic automatic transmissions (AT), manual transmissions have both advantages and disadvantages. Advantages: Compared to automatic transmissions, they offer more control pleasure for driving enthusiasts. Higher transmission efficiency than automatic transmissions, resulting in better fuel economy under the same engine displacement. Simpler construction, cheaper maintenance, and greater durability than automatic transmissions. Relatively mature technology and lower manufacturing costs. Higher reliability. Disadvantages: Gear shifting requires simultaneous control of the clutch, gear lever, and throttle, increasing the driver's operational burden, especially for beginners, potentially causing nervousness and affecting driving safety. Inexperienced clutch control can lead to stalling on the road, and improper uphill operation may damage the engine and transmission. Manual transmissions are purely mechanical, so adding gears increases size and weight, limiting the number of gears (currently up to seven speeds, with six speeds being optimal). In contrast, automatic transmissions using planetary gear sets (AT) or steel belts (CVT) can compress size with technological advancements, allowing more gears without increasing volume. Classification and Structure: Manual transmissions consist of gear transmission mechanisms, transmission housing, and control mechanisms. The gear transmission mechanisms can be classified by the number of forward gears or the form of shafts. Based on the number of forward gears, they can be three-speed, four-speed, five-speed, or multi-speed transmissions. Based on shaft forms, they can be fixed-axis (where gear rotation axes are stationary) or rotating-axis (where gear rotation axes also rotate, such as planetary gear transmissions). Fixed-axis manual transmissions can be further divided into two-shaft, intermediate-shaft, double intermediate-shaft, and multi-intermediate-shaft types based on the number of shafts.
5
3
Share

Which is bigger, a subcompact car or a compact car?

Compact cars are larger. Relevant information is as follows: 1. Compact cars, also known as A-segment cars, have a wheelbase between 2500mm and 2700mm, and an engine displacement between 1.6L and 2.0L. Examples of compact cars include: Chevrolet Cruze, Mitsubishi Lancer, Buick Excelle, Hyundai Elantra, Nissan, etc. 2. Subcompact cars refer to A0-segment cars within the A-segment, with a wheelbase between 2200mm and 2300mm, and an engine displacement between 1L and 1.3L. Examples of subcompact cars include: Changan Yuexiang, Toyota Yaris L, Volkswagen Polo, Toyota Vios FS, Wuling Hongguang MINIEV, etc.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.