···
Log in / Register

What does the driving license test subject 2 include?

6Answers
Legolas
07/24/2025, 04:20:22 AM

Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and is the abbreviation for the field driving skills test. For small vehicles C1 and C2, the test items include five mandatory tests: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on a curve (commonly known as the S-curve). In some regions, there is also a sixth item: highway toll card collection. Teaching objectives: Master the essentials: grasp the basic driving operation essentials and possess the basic ability to control the vehicle; Develop skills: proficiently master the basic methods of field and road driving, have the ability to reasonably use vehicle control components and correctly control the spatial position of the vehicle, and be able to accurately control the vehicle's driving position, speed, and route.

Was this review help?
105
Share
DelMichael
08/10/2025, 09:03:27 PM

When learning the second subject of the driving test, I felt the most challenging part was the basic driving maneuvers. Reversing into a parking space was my biggest headache—it required accurately backing into the designated spot without crossing the lines or going out of bounds. Parallel parking involved checking the rearview mirrors and ground markers, making precise positioning crucial. The hill start was nerve-wracking, as I feared stalling on the slope and had to balance the clutch and throttle carefully. The 90-degree turn demanded quick steering to avoid the tires hitting the corner. The curve driving felt like maneuvering a slot car—slow and steady to stay within the lines. The entire test emphasized precise operations within the designated area. I practiced countless simulations before the exam, memorizing every step of each task, and barely passed. Frequent practice to get familiar with clutch and throttle coordination, along with deep breaths to stay calm during the test, can help you succeed.

Was this review help?
11
Share
Expand All
StMadeline
09/24/2025, 10:04:50 PM

The Subject 2 field test consists of several key components: the reverse parking test evaluates reversing skills, requiring steady steering and a slow approach; the parallel parking test checks if you can accurately park alongside the curb; the hill start assesses control, stopping within the white line before restarting; the right-angle turn examines steering timing; and the curve driving ensures smooth cornering. During practice, I found the hill section the most prone to mistakes—poor clutch control leads to stalling; the right-angle turn requires quick, precise, and steady steering. It's advisable to practice mock tests frequently to reinforce muscle memory. Remember the markers on the test course, stay relaxed during the exam, complete each action step by step, and don't let minor mistakes affect the overall performance.

Was this review help?
4
Share
Expand All
VonPaige
11/07/2025, 11:12:33 PM

The main items in Subject 2 of the driving test are: reverse parking, parallel parking, hill start, right-angle turn, and curve driving. For reverse parking, you need to align the car when backing up; for parallel parking, find the reference point to park; for hill start, stop steadily on the slope before moving; for right-angle turns, turn the wheel quickly; and for curve driving, control the direction well to avoid crossing the line. I find the curve section the most fun, like playing a game, but don’t get careless. Practice is key—repeatedly practice reversing and hill starts to avoid failing on these. With more driving experience in daily life, passing will be easy.

Was this review help?
4
Share
Expand All
DelBethany
12/29/2025, 12:57:34 AM

I remember that when learning to drive, the contents of Subject 2 included reversing into a parking space, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on a curve. The part about starting on a slope often caused problems—stopping at the designated point and starting again, and if you weren’t careful, the engine would stall and points would be deducted. Reversing into a parking space required precise backing into the spot, testing your use of the rearview mirrors. When I was younger, I was nervous during the test, but later I realized that the key was controlling the speed and staying focused. Looking back now, these exercises laid the foundation for basic driving skills, and mastering them made my skills solid. I recommend practicing in simulated real-life scenarios to get used to coordinating the clutch and throttle, which helps reduce test anxiety.

Was this review help?
1
Share
Expand All
DiFrancisco
03/26/2026, 03:33:26 AM

Subject 2 mainly tests basic on-site driving skills. For example, reversing into a garage trains spatial awareness; parallel parking relies on reference point judgment; hill starts examine control precision; right-angle turns test steering accuracy; and curve driving requires smooth cornering without crossing lines. Nowadays, driving simulators or auxiliary tools like route-viewing apps are used for practice, but the actual test still requires manual operation. The key is to maintain smooth and coherent movements without rushing. During practice, focus on coordinating the clutch and brake. In the exam, proceed steadily and ensure each step is error-free to pass.

Was this review help?
7
Share
Expand All
More Q&A

What are Monocoque Body and Body-on-Frame?

Monocoque and body-on-frame are classifications based on how a vehicle's structure bears loads. Below is a detailed introduction to monocoque body and body-on-frame: 1. Monocoque Body: A monocoque body does not have a separate frame; the body itself serves as the mounting base for the engine and chassis components, functioning as the frame and bearing all loads. This structure involves directly mounting chassis components (such as the engine and suspension) onto the body, primarily constructed with thin panels. 2. Body-on-Frame: In a body-on-frame design, the body is flexibly connected to the frame through rubber cushions or springs. The frame is the foundation that supports the entire vehicle, bearing various loads from the installed components. The body only bears the weight and inertial forces of the passengers and cargo, and the frame design does not consider the body's auxiliary role in load-bearing.
116
Share

What is the reason for the EPC light coming on while driving and then turning off after restarting?

The reasons for the EPC light coming on while driving and then turning off after restarting are: 1. The EPC light mainly illuminates due to a dirty throttle body. In this case, simply cleaning the throttle body and then performing a reset can resolve the issue; 2. There is a fault in the intake system. When the engine detects this fault after starting, it will illuminate the EPC warning light. This situation requires inspection and repair at a service station. The main reasons for the engine fault light coming on are excessive carbon deposits in the throttle body or inside the engine, as well as a malfunctioning oxygen sensor causing an imbalance in the air-fuel mixture ratio, which can easily trigger the engine fault light. If the fault light comes on in a new car, it is usually due to the use of lower-grade fuel.
110
Share

What is the method for resetting the maintenance reminder on the Roewe RX5 MAX?

Roewe RX5 MAX maintenance reset method is: 1. Press the Roewe RX5's one-touch start button without stepping on the brake pedal or starting the engine; 2. Ensure the dashboard lights are on, confirming full vehicle power is connected; 3. Simultaneously press the phone button on the left side of the multifunction steering wheel and the OK button on the right side; 4. Press the down arrow button on the right side three times; 5. Press the OK button on the right side of the multifunction steering wheel to complete the maintenance reset. Taking the 2020 Roewe RX5 20T manual 4G Internet Million Edition as an example, this vehicle is a 5-door, 5-seat SUV with dimensions of 4556mm in length, 1855mm in width, 1719mm in height, and a wheelbase of 2700mm.
105
Share

What is a Foot Brake?

Foot brake refers to the parking foot brake, a type of parking brake that is operated by the foot, commonly found in automatic transmission models. The following is a detailed introduction to automotive brakes: 1. Overview: Braking, also known as deceleration, refers to the action of stopping or reducing the speed of moving locomotives, vehicles, and other transportation tools or machinery. The general principle of braking is to fix a wheel or disc on the high-speed shaft of the machine, and install corresponding brake shoes, bands, or discs on the machine base, which generate braking torque under external force. 2. Brake Pads: Automotive brake pads, also known as automotive brake linings, refer to the friction materials fixed on the brake drum or brake disc rotating with the wheel. The friction linings and friction blocks bear external pressure to generate friction, thereby achieving vehicle deceleration.
108
Share

Is it necessary to turn off the air conditioning when parking?

It is necessary to turn off the air conditioning when parking. Otherwise, it will slightly affect the evaporator. If the air conditioning is not turned off in advance, water will remain on the evaporator. The evaporator is enclosed in a sealed box, making it difficult for the water to evaporate naturally, requiring a long time. Due to the dark and humid environment, mold can grow over time, leading to unpleasant odors and even affecting health. Additional information: Not turning off the air conditioning has no impact on the engine. This is because the compressor does not rotate during startup, so it does not add unnecessary load to the starter. When the vehicle starts, almost all electrical appliances are in a power-off state, with all current and voltage concentrated on the starter. The air conditioning panel also has no power, so the compressor naturally does not start. After the vehicle starts, the compressor will begin working in about three to five seconds. For compressors with an electromagnetic clutch, you can hear a clicking sound, which is the sound of the compressor engaging.
112
Share

How to turn off ESP in Ford Escort?

The ESP in Ford Escort is automatically activated without an external switch, requiring no manual operation. Taking the 2021 Ford Escort 1.5L Automatic Gold Edition as an example, this compact sedan features a 4-door, 5-seat configuration with dimensions of 4633mm in length, 1825mm in width, and 1490mm in height, and a wheelbase of 2687mm. It is equipped with a 1.5L naturally aspirated engine paired with a 6-speed automatic transmission, delivering a maximum power of 90kW, a maximum torque of 152Nm, and a maximum horsepower of 122PS. The vehicle adopts a front-engine, front-wheel-drive layout, with a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension, built on a unibody structure.
105
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.