What does the driver's license type C1D mean?

What is the replacement method for the Buick Excelle's reverse light?

The replacement method for the Buick Excelle's reverse light is: 1. Open the decorative cover at the right end of the rear trunk and remove it; 2. Remove the fixing screw, take out the bulb, and replace it. The car reverse light, installed at the rear of the vehicle, is used to illuminate the road behind the car when reversing and serves to alert vehicles and pedestrians behind. The Buick Excelle has a body length, width, and height of 4609mm, 1798mm, and 1464mm respectively, with a wheelbase of 2460mm and a fuel tank capacity of 44 liters. The Buick Excelle is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 113PS, a maximum power of 83kW, a maximum torque of 141Nm, and is paired with a 7-speed automatic manual transmission.

13

0

Share

How to reset the tire pressure warning on a BMW X1?

Method to reset the tire pressure warning on a BMW X1: Close all doors; Insert the key; Press the start button (without pressing the brake pedal); Allow the computer to complete self-check; Press and hold the odometer reset button on the dashboard until the maintenance reset indicator appears; Use the information switch button on the turn signal lever to select the maintenance item to be reset; Press and hold the information switch button to complete the reset. Introduction to the BMW X1: 1. Exterior: The front bumper design has been slightly adjusted for a more sporty appearance; The rear taillights feature a smoked treatment for a more premium visual effect, and even the base model adopts a dual-exhaust layout for better visual balance. 2. Features: The 17-inch wheels have been upgraded to 18-inch; The center console screen size has been increased from 6.5 inches to 8.8 inches with touch support; The ambient lighting has been upgraded from dual-color to 6-color; The headlights have been upgraded from halogen to LED sources.

11

3

Share

What functions does the Kia K5 center control screen have?

Kia K5 center control screen functions include tire pressure monitoring, remaining maintenance mileage, reverse camera, navigation, and media playback. Apart from the hybrid dial replacing the traditional tachometer dial, other designs of the Kia K5 are very minimalist, with a black and white screen that displays clearly. When coasting, the vehicle can enter the kinetic energy recovery phase, and the recovery speed increases during braking. The following are the functions of the Kia K5 center control screen: 1. When there is a problem with tire pressure, the tire pressure monitoring can show which tire is damaged. 2. The remaining mileage and time for maintenance can be displayed, allowing you to schedule time in advance. 3. When reversing out of a parking space, the blind spots on both sides at the rear are large, and the vehicle radar can detect and prompt in time. 4. After ignition, the seat will automatically reset, and when the engine is turned off, the seat can also automatically move back. If you are petite and do not need too much space, you can switch to a small range.

15

1

Share

What are the methods to deal with oil film on the car's front windshield?

Methods to deal with oil film on the car's front windshield are: 1. Use an oil film cleaner to wipe it off; 2. Apply dishwashing liquid with a cloth to wipe the oil film area; 3. Apply baking soda toothpaste, then wipe with a wet newspaper; 4. Clean the glass with soapy water; 5. Replace the wiper blades. The reasons for oil film on the car's front windshield are: 1. Car exhaust and asphalt dust stick to the windshield surface and turn into oil film; 2. Oil stains enter the wiper fluid reservoir when filling it, and when spraying the wiper fluid, the oil stains adhere to the glass, forming an oil film; 3. Worn wiper blades leave water marks after wiping, which form an oil film.

13

0

Share

What is the Scrap Age Limit for Diesel Off-Road Vehicles?

There is no mandatory scrap age limit for diesel off-road vehicles. Generally, it is recommended to scrap them after 15 years of use. If continued use is necessary, annual inspections must be conducted in accordance with national regulations. Below are relevant details about vehicle scrapping: 1. Scrap Standards: Light and mini trucks (including off-road types) and specialized mining vehicles should be scrapped after accumulating 300,000 kilometers. Heavy and medium trucks (including off-road types) should be scrapped after 400,000 kilometers. Extra-large, large, medium, light, and mini buses (including off-road types) and sedans should be scrapped after 500,000 kilometers. Other vehicles should be scrapped after 450,000 kilometers. 2. Procedure: If a motor vehicle reaches the national usage limit but needs to continue road use, the owner must apply for an inspection mark at the local vehicle management office within 30 days before reaching the usage limit.

18

4

Share

What is the Difference Between Imported Mercedes-Benz and Beijing Mercedes-Benz?

1. In terms of material selection and usage, imported Mercedes-Benz vehicles use materials uniformly selected and ordered by the main Mercedes-Benz factory. In contrast, Beijing Mercedes-Benz mostly sources materials from its own cooperative manufacturers, as materials from the main factory are significantly more expensive and subject to high tariffs, making the overall vehicle cost much higher and less economical. 2. Beijing Mercedes-Benz also faces issues with reduced configurations, a problem not unique to Mercedes-Benz but common among many joint-venture vehicles. For example, the ACC adaptive cruise control system is standard on imported Mercedes-Benz E-Class models, while the domestic Mercedes-Benz E-Class only comes with standard cruise control, with no adaptive cruise option even on top-tier models. 3. There are also significant differences in post-sale maintenance and repairs between imported Mercedes-Benz and Beijing Mercedes-Benz. As everyone knows, some car parts need replacement after prolonged use due to their limited lifespan. For Beijing Mercedes-Benz, replacing parts is relatively straightforward, as most required components can be found at 4S stores nationwide, and the costs are not excessively high. However, imported Mercedes-Benz is different—many of its parts are not readily available domestically and must be ordered from the original factory, incurring additional tariffs, which significantly increases the cost of a single part. Moreover, importing parts also takes time, leading to longer wait periods.

2

Share

What does the driver's license type C1D mean?

What is the replacement method for the Buick Excelle's reverse light?

How to reset the tire pressure warning on a BMW X1?

What functions does the Kia K5 center control screen have?

What are the methods to deal with oil film on the car's front windshield?

What is the Scrap Age Limit for Diesel Off-Road Vehicles?

What is the Difference Between Imported Mercedes-Benz and Beijing Mercedes-Benz?

What is the classification method for sedan levels?

Can a Cracked Front Bumper Be Repaired?

What is the method for removing the low beam headlight of the Lavida?

What are the functions of the braking system?