What Does the Driver's License Physical Examination Mainly Check

2 Answers
LeNadia
07/29/25 2:53am
Driver's license physical examination mainly checks surgery, internal medicine, ophthalmology, and hearing. The following is a detailed introduction to the driver's license physical examination: 1. Examination items: Surgery, internal medicine, ophthalmology, and hearing. Surgery includes height, weight, body movement function examination, physiological defect determination, etc. Internal medicine includes cardiovascular system diseases, nervous system diseases, and mental disorders. Ophthalmology includes naked eye vision, corrected vision examination, etc. 2. Examination standards: Annual physical examination is required. The age must be between 18-70 years old, both eyes' vision must reach 4.9, no red-green color blindness, normal hearing, sound upper limbs, normal lower limb movement function, no motor dysfunction in the trunk and neck, etc.
Was this review help?
16
0
Share
VanAnderson
08/12/25 6:46am
I remember accompanying my friend to the driver's license medical exam last year, which mainly checked vision, color discrimination, hearing, and limb mobility. The vision test was particularly important, requiring uncorrected or corrected visual acuity of at least 4.9—meaning no severe myopia where you can't even see road signs without glasses. There was also a traffic light recognition test using a device, which is why people with color blindness or weakness can't obtain a driver's license. The doctor also used a tuning fork to test hearing, as drivers need to clearly hear horns and warning sounds. Finally, there were on-the-spot deep squats and walking in a straight line to check for any limb disabilities that might affect pressing the accelerator or brake. The whole process took about half an hour, and only those who met all the key standards could enroll in driving school.
Was this review help?
3
3
Share
Expand All
More Forum Discussions

What Are the Reasons Why the Tesla Charging Gun Cannot Be Pulled Out?

The reasons why the charging gun cannot be pulled out include: the car is not unlocked, the charging gun is faulty, or the locking motor is faulty. Car not unlocked: When the car is locked, the charging gun is automatically locked to prevent others from pulling it out. If the car is not unlocked, the charging gun cannot be pulled out. Solution: Open the car door, and once the car is unlocked, the charging gun can be pulled out. If the charging gun still cannot be pulled out, you can first stop the charging via the car's infotainment system and then unlock the charging gun again. Charging gun fault: If the charging gun is faulty or does not match the car model, it may cause the charging gun to not be pulled out. Solution: Before charging, check whether the charging gun is faulty and whether it matches the car model. If it still cannot be pulled out, it is recommended to call Tesla customer service or the charging station customer service for remote unlocking. Locking motor fault: You can use the emergency unlock method to unlock it. Open the trunk, and there is a black pull ring in the hollowed-out area of the left felt cloth, which can unlock the charging gun, allowing it to be pulled out.
3
5
Share

How to adjust the audio equalizer on the Reiz?

First, open the player and play a song, then select the equalizer. After that, you can proceed with the corresponding settings. The car audio equalizer is an electronic device that can adjust the amplification of various frequency components in the electrical signal. It compensates for defects in car speakers or the sound field by adjusting electrical signals of different frequencies. Below is relevant information about the Reiz audio equalizer: 1. Sub-bass: 20Hz-40Hz, when properly adjusted, the sound is strong and powerful. It controls sounds like thunder, bass drums, pipe organs, and bass. Excessive boosting can make the music muddy. 2. Bass: 40Hz-150Hz, this is the foundational part of the sound, accounting for 70% of the entire audio energy. It is a crucial component in expressing musical style. When properly adjusted, the bass is balanced, and the sound is full and soft. Insufficient adjustment makes the sound thin. At 150Hz, excessive boosting can make the sound muffled, reduce brightness, and increase nasality. 3. Mid-bass: 150Hz-500Hz, this is the structural part of the sound, where the human voice is located. Insufficient adjustment can cause the vocal to be drowned out by the music, making the sound weak. Proper boosting makes the sound robust and powerful, enhancing its strength and loudness. Excessive boosting can make the bass harsh. Boosting 300Hz by 3-6dB excessively, especially with added reverb, can severely affect sound clarity. 4. Midrange: 500Hz-2KHz, this includes the lower harmonics and overtones of most instruments and is characteristic of snare drums and percussion. Proper adjustment makes the sound clear and bright, while insufficient adjustment makes it muffled. Excessive boosting can produce a telephone-like sound. 5. Upper midrange: 2KHz-5KHz, this is characteristic of string instruments (the friction of the bow on strings in bowed instruments, the sound of fingers plucking strings). Insufficient adjustment reduces the sound's penetration, while excessive boosting can mask the recognition of speech syllables. 6. Treble: 7KHz-8KHz, this frequency affects the sense of sound layering. Excessive boosting can make the sound of piccolos and flutes stand out, increase sibilance in speech, and make the timbre harsh. 7. Super treble: 8KHz-10KHz, when properly adjusted, the metallic clarity of triangles and cymbals is high, and the rhythm of a sand clock is distinct. Excessive boosting can make the sound unnatural and risk burning out high-frequency units.
13
5
Share

Is the single central differential of Haval H9 sufficient?

Haval H9's single central differential is sufficient. Introduction to the central differential: The Haval H9 utilizes BorgWarner's dual-speed TOD transfer case as its central limited-slip differential, with selectable modes including 2H/AUTO/LOCK/4L. It is referred to as a limited-slip differential because the TOD is an on-demand four-wheel-drive system. Positioned near the transmission output shaft, it integrates multiple sensors to monitor vehicle speed, front and rear axle speeds, throttle opening, ABS status, and other system parameters. During normal driving, the vehicle operates in rear-wheel drive. Only when a speed difference between the front and rear axles is detected—indicating front wheel slippage—does the TOD's internal electromagnetic coil engage the secondary wet clutch, distributing power to the front axle. In cases of severe front wheel slippage, the system increases the electromagnetic coil current, and the torque amplifier tightens the multi-plate clutch, thereby allocating more torque to the front axle. Classification of central differentials: Different differentials employ various locking mechanisms. Common differential locks include the following types: forced locking, high-friction self-locking, jaw coupling, Torsen, and viscous coupling. Among these, the jaw coupling type is frequently used in medium and heavy-duty trucks.
19
4
Share

What is the rim size of the BMW 1 Series?

The BMW 1 Series comes with three types of rims: 18-inch rims for the 118i, 17-inch rims for the 118i, and 16-inch rims for the 118i. Below is a detailed introduction about car rims: 1. Overview: The rim is the rotating part of the wheel that connects the inner contour of the tire to the wheel hub via spokes, which is the metal component mounted on the axle that supports the tire. It is also called the wheel ring, steel ring, wheel, or tire ring. Rims come in various types based on diameter, width, forming method, and material. 2. Others: Relevant data about car rims include the rim's diameter, width, bolt hole size, center hole, and offset. Some of these parameters can be seen visually, some require simple measurements, and others need professional tools for measurement.
20
0
Share

Is a new car scratch covered by 4S store warranty?

A new car scratch is not covered by the 4S store warranty, and the reason is: the scratch on a new car is a human factor and does not belong to the quality problem of the vehicle. The solutions for a scratched new car are: 1. Repair by sandpaper grinding. Clean and dry the scratched area of the car, and gently rub the scratched area with sandpaper dipped in water; 2. Repair with chilled cola. Pour a small amount of cola on a cloth and continuously wipe the scratched area; 3. Repair with essential balm. Pour a small amount of essential balm on a cloth and continuously wipe the scratched area; 4. Repair with toothpaste. Clean the scratch with a cloth, squeeze toothpaste onto a wet towel or soft sponge, and wipe the scratch up and down; 5. Repair with nail polish. Applying a layer of nail polish on the scratch can prevent the scratch from rusting.
13
3
Share

Where to Check Tire Pressure Monitoring on the Changan New Eado?

Changan Eado's tire pressure monitoring can be viewed on the central control screen. Changan Eado's direct tire pressure monitoring system uses pressure sensors installed in each tire to directly measure the tire pressure. The system then transmits the pressure information from inside the tire to a central receiver module via a wireless transmitter, displaying the data for each tire's pressure. The system will automatically alert when the tire pressure is too low or if there is a leak. There are three commonly used methods of tire pressure monitoring: Direct Tire Pressure Monitoring: This system uses pressure sensors installed in each tire to directly measure the tire pressure. The pressure information is transmitted from inside the tire to a central receiver module via a wireless transmitter, displaying the data for each tire's pressure. The system will automatically alert when the tire pressure is too low or if there is a leak. Indirect Tire Pressure Monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that wheel to become smaller, making it rotate faster than the other wheels. By comparing the rotational speed differences between tires, the system monitors the tire pressure. Indirect tire pressure monitoring systems essentially rely on calculating the rolling radius of the tires to monitor pressure. Tire Pressure Monitoring System (TPMS) Introduction: This system combines the advantages of both the above systems. It equips direct sensors in two diagonally opposite tires and includes a four-wheel indirect system. Compared to using only direct systems, this hybrid system reduces costs and overcomes the limitation of indirect systems, which cannot detect multiple tires with low pressure simultaneously. However, it still cannot provide real-time pressure data for all four tires as effectively as direct systems.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.