What does the disp button on a car mean?

How to Cancel the Exemption from Inspection Applied for on 12123?

To cancel the application for the exemption from inspection on 12123, you can do so via the 12123 APP, visit the vehicle management office to cancel the application, or call the vehicle management office to cancel the application. Related details are as follows: 1. Introduction to 12123: 12123 is a mobile APP where you can apply for the exemption from inspection. 2. Regulations on Exemption from Inspection: According to the new regulations, non-commercial vehicles within 6 years can apply for online exemption from inspection. Although the vehicles are exempt from inspection for 6 years, it is still necessary to collect the annual inspection label every 2 years. Many vehicle owners apply for the exemption from inspection via the 12123 APP.

20

3

Share

What is the purpose of the shark fin on a car?

The shark fin on a car serves the following purposes: 1. Protection: It features an external shell with internal anti-theft components, effectively preventing theft of the external car antenna. The shell also provides waterproof and dustproof functions, enhancing the antenna's durability. During automatic car washes, there's no need to remove the antenna—it can be cleaned directly. 2. Reduced Resistance: Designed in the shape of a shark fin, it is more aerodynamic than traditional rod-shaped antennas, reducing air resistance while driving and notably lowering wind noise. Additionally, the shark fin antenna's increased side area improves electronic signal capture. 3. Damage Prevention: Positioned on the roof, the shark fin antenna concentrates static electricity at its tail tip and discharges it, effectively preventing damage to onboard electronic devices from accumulated static. 4. Signal Reception: Modern cars require reception of various signals beyond just FM radio waves, including GPS, GSM, and other electronic signals. Many shark fin antennas integrate functions related to receiving these signals.

15

1

Share

What Are the Differences Between Good and Bad Automotive Explosion-Proof Films?

There are several key differences between good and bad automotive explosion-proof films: 1. Light transmittance: High-quality front windshield films should have a light transmittance of over 80%, while side window films should ideally have a light transmittance of more than 35%. 2. Scratch resistance: Premium films feature a scratch-resistant layer that protects the surface from damage under normal use; lower-grade films are more prone to scratches, leading to reduced clarity. 3. Explosion-proof performance: Inferior films are thin, feel soft, lack sufficient toughness, cannot block UV rays, and are prone to aging and brittleness. In the event of an impact or collision, they easily break and fail to adhere to the glass. High-quality explosion-proof films use special polyester materials with strong toughness and are paired with pressure-sensitive adhesives, ensuring that the film remains bonded to the glass during collisions to prevent shattering and injury.

18

4

Share

What to Do When Push-Button Start Fails to Ignite in Winter?

There are many reasons why a push-button start may fail to ignite in winter, and solutions vary depending on the issue. Below are the common causes and their solutions: 1. Steering wheel lock preventing ignition: If the steering wheel is not straightened when parked and remains at a slightly larger angle (e.g., over 30 degrees), it may automatically lock as an anti-theft measure. This can make the key difficult to turn, preventing ignition. Solution: Apply force to turn the steering wheel while simultaneously turning the key to unlock it, then attempt to start the car. 2. Smart key battery depletion: Even if the key is inside the car, the dashboard may display 'key matching error' due to a weak battery in the smart key, making the start system unable to detect its faint signal. Solution: Place the smart key directly on the start button and press the button to start. If the remote key is depleted or fails to match for other reasons, insert it into the emergency backup key slot and press the start button. 3. New car not pressing the brake before push-button start: For borrowed or newly purchased vehicles with push-button start, pressing the brake is necessary for ignition. Pressing the start button without the brake only activates the electrical system but does not start the car. Solution: Press the brake before using the push-button start.

5

4

Share

What are the dimensions of the Buick Excelle?

Buick Excelle's length, width, and height dimensions are 4609mm/1798mm/1464mm, which are official data. The length of the Buick Excelle refers to the distance between two vertical lines perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the car; the width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle; the height refers to the distance between the highest point of the vehicle and the vehicle's supporting plane. The naturally aspirated engine of the Buick Excelle has a maximum power of 83kW and a maximum torque of 141 N·m. This engine reaches its maximum power at 6000 rpm and its maximum torque at 4400 rpm. It features multi-point fuel injection technology and uses an aluminum alloy cylinder head with a cast iron cylinder block. This engine is paired with a 6-speed automatic manual transmission (AT). There are national regulations regarding vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, under national standards, the significance of vehicle width data lies in ensuring enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the usage requirements of public roads.

18

4

Share

How to Install the Camshaft on a Hyundai Santa Fe?

Modern Santa Fe camshaft installation method is as follows: 1. Before installing the camshaft: first install each bearing cap and check if the camshaft holes are misaligned; 2. When installing the camshaft: the camshaft of cylinder 1 must be facing upwards without pressing on the valves; 3. After installing the bearing caps: first tighten the bearing caps of the 2nd and 5th journals alternately in a diagonal pattern with a torque of 20Nm, then install the bearing caps of the 1st and 3rd journals, and finally install the bearing cap of the 4th journal, tightening all bearing cap bolts to a torque of 20Nm; 4. Installing the camshaft oil seal: install the camshaft half-moon key and timing gear, then tighten the bolt to a torque of 80Nm.

15

2

Share

What does the disp button on a car mean?

How to Cancel the Exemption from Inspection Applied for on 12123?

What is the purpose of the shark fin on a car?

What Are the Differences Between Good and Bad Automotive Explosion-Proof Films?

What to Do When Push-Button Start Fails to Ignite in Winter?

What are the dimensions of the Buick Excelle?

How to Install the Camshaft on a Hyundai Santa Fe?

What causes the clicking sound from the tires?

Will Crossing the Solid Line on Highways Definitely Be Captured by Cameras?

What does 45tfsi mean in Audi A6L?

What is the difference between Volkswagen's 2.0T high-power and low-power engines?