What Does the Directional Arrow on the Cabin Air Filter Indicate?

1 Answers
EvaAnn
07/29/25 1:44am
Car cabin air filter directional arrow indicates the front and back sides of the filter, with the arrow pointing in the direction of airflow, which is also the installation direction. Below are details about the directional arrow on cabin air filters: Meaning: When the arrow points upward, it indicates the front side, which should face the airflow direction during installation. Alternatively, you can determine the front and back sides by observing the filter surface: the ordinary fuzzy side is the front (facing upward toward airflow), while the side with support line structure is the back (facing away from airflow). For activated carbon filters, the black side facing airflow is the front, while the white side facing away is the back. Replacement Interval: The replacement cycle for car cabin air filters depends on individual driving habits, external environment, and seasonal climate. Generally, urban household vehicles should replace it every 10,000-20,000 kilometers or once a year. If driving in dusty or poor conditions, the filter gets dirty faster, requiring more frequent replacement. Additionally, seasonal variations in AC usage affect replacement intervals. During seasons with less AC use (like autumn), the replacement cycle can be slightly extended.
Was this review help?
14
3
Share
More Forum Discussions

Can New and Old Tires Be Used Together?

New and old tires cannot be used together. Tires are often used under complex and demanding conditions, enduring various deformations, loads, forces, and high and low temperatures during operation. Therefore, they must have high load-bearing performance, traction performance, and cushioning performance. At the same time, they are also required to have high wear resistance and flex resistance, as well as low rolling resistance and heat generation. Additional Information: Tire Validity Period: Since tires are rubber products and are subject to aging issues, consumers should pay special attention to the production date of the tires. Do Not Use Tires Without the CCC Mark: Automotive tires must be certified and marked with the certification mark before they can be manufactured, sold, imported, or used in other business activities. Tires without the molded CCC mark cannot guarantee safety.
3
3
Share

Will Insurance Fully Cover the Cost if a Car is Driven into a River?

No compensation will be provided if commercial insurance is not purchased; if purchased, the loss will be assessed. Below is detailed information regarding insurance claims for cars driven into rivers: Introduction: Pay attention to the type of car insurance you have—whether it's only compulsory traffic insurance or includes comprehensive commercial insurance. If it's only the former, the insurance company will not compensate for a car driven into a river, as compulsory insurance only covers people and property. Notes: If comprehensive commercial insurance is in place, the loss will be assessed. After all, a car driven into a river may not be completely totaled. Electrical systems will be assessed separately, and parts will be evaluated individually—all will undergo loss assessment. This assessment includes costs such as salvage and rescue fees, as well as cleaning expenses.
8
1
Share

What is the solution for a Hill Descent Control (HDC) malfunction?

Hill Descent Control (HDC) malfunction solution: Do not force the system to descend steep slopes and proceed to a maintenance facility for inspection as soon as possible. The Hill Descent Control system, also known as the Hill Descent Control (HDC), enables drivers to smoothly navigate steep downhill sections without pressing the brake pedal, maintaining full control. Precautions for using Hill Descent Control: 1. The Hill Descent Control system must be set up before use to ensure the driver can focus on driving. After setting up the system, the driver should release all pedals to avoid interfering with its operation. 2. When descending with Hill Descent Control, the driver does not need to press any pedals. The vehicle will automatically travel at a speed of approximately 8 km/h. During automatic operation, the driver only needs to steer the vehicle.
15
3
Share

Where is the fuel tank switch generally located?

The fuel tank switch is typically located on the left front door panel or the center console, usually marked with a fuel pump icon. Always ensure the engine is turned off before refueling. Refueling Precautions: 1. During refueling: Turn off the engine, avoid making phone calls or using mobile devices, and refrain from using open flames within the gas station. Do not answer calls or use phones inside the station. Always shut off the engine while refueling. If there is a queue, wait in line orderly without cutting in. 2. When selecting fuel: Always choose gas stations with high-quality fuel and avoid those with poor-quality products. Prolonged use of low-grade gasoline can lead to increased carbon deposits in the engine. It's essential to select reputable stations and use the correct gasoline grade.
18
4
Share

Where is the spare tire of BYD Song located in the car?

BYD Song's spare tire is located under the trunk cover. Precautions for using the spare tire include: 1. Pay attention to speed when using the spare tire; 2. Avoid prolonged use of the spare tire; 3. Regularly maintain the spare tire; 4. Replace the spare tire periodically; 5. Avoid contact between the spare tire and oil products. Taking the 2021 BYD Song as an example, its body dimensions are: length 4600mm, width 1830mm, height 1700mm, with a wheelbase of 2660mm. The 2021 BYD Song features a front McPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 160PS, maximum power of 118kW, and maximum torque of 245Nm, paired with a 6-speed manual transmission.
4
4
Share

Is it allowed to use high beams on highways?

High beams can be used on highways under certain conditions. Here is an introduction to lighting usage during high-speed driving: When high beams can be used: Under appropriate conditions, high beams must be used when driving on highways at night. Especially when maintaining sufficient following distance or when road conditions are poor, using high beams can ensure driving safety. When high beams should not be used: When following another vehicle. To avoid affecting the driver ahead, turn off high beams when maintaining a safe following distance. When preparing to overtake. Switch to low beams and turn on turn signals to clearly communicate your intention to overtake; after completing the overtaking maneuver, you may switch back to high beams. When entering toll stations or service areas. Turn off high beams and reduce speed. When passing through ramp intersections. Turn off high beams (as continuous curves prohibit high beam usage) and slow down.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.