···
Log in / Register

What does the dashboard indicator with a seat and a round ball mean?

3 Answers
OReagan
07/29/25 8:12am
The dashboard indicator showing a seat and a round ball is the airbag warning light. If road conditions permit, when the safety warning light comes on, you can find a safe place to temporarily stop, turn off the engine, disconnect the negative terminal of the power source, wait for 5-10 minutes, then reconnect it, restart the engine to complete the vehicle self-check, and then check if the airbag light on the dashboard is still illuminated. Possible reasons for the airbag light being on: 1. Reason one: Issues such as steering wheel clock spring failure, loose or poor contact of the airbag sensor, airbag body failure, or airbag ECU circuit failure. These issues cannot be confirmed by simple disassembly and inspection but require using a diagnostic tool to read fault codes and systematically troubleshoot, then repair or replace the faulty components. After completion, the airbag warning light on the dashboard can be reset. 2. Reason two: The airbag light may come on due to a false fault, caused by the vehicle's battery being low on power or the use of other electrical equipment affecting the airbag's electronic control signals, ultimately sending incorrect feedback to the ECU and triggering the indicator light. In this case, simply use a diagnostic tool to clear the fault codes.
Was this review help?
11
0
Share
Judah
08/13/25 4:16am
I've been driving for over ten years and have seen that seat-with-a-ball icon on the dashboard several times. At first, I didn't understand it. Later, I learned that it's a reminder that the passenger seatbelt isn't fastened properly—the ball symbolizes a simplified human head representing the passenger. Once when I was driving a friend, this icon lit up, and my friend thought it was the seat heating function. It wasn't until a minor accident occurred that we realized its importance. Seatbelts secure the body and reduce the risk of impact injuries. Now, the first thing I do when getting in the car is remind everyone to check their seatbelts. Developing this habit is crucial—whether it's a short trip or a long journey, always buckle up. Safe driving is no joke; a small oversight can change everything. Pay attention to these safety alerts on the dashboard—life is priceless. Modern cars design these smart icons well, but it's up to us to stay vigilant.
Was this review help?
1
4
Share
Expand All
Manuel
10/05/25 4:56am
As someone who enjoys tinkering with cars, I'm very familiar with various dashboard warning lights. That icon combining a seat and a round shape definitely indicates an unbuckled passenger seat belt - it means there's someone in the front passenger seat who hasn't fastened their seatbelt, triggering the system's warning light. I find this design quite considerate, as drivers can sometimes get distracted and forget to remind passengers. Seatbelts significantly reduce the probability of severe injuries during sudden braking or collisions, protecting both the spine and internal organs. I recommend regularly checking if the seatbelt buckles function properly - even free-to-replace fuses often fail and cause false alarms. Safety should always come first when driving - don't cut corners by ignoring these details. Developing good habits is the only way to drive with peace of mind. I've even tested warning systems across different car models, with some being more sensitive. Ultimately, life is precious - never take safety for granted.
Was this review help?
1
0
Share
Expand All
More Forum Discussions

How to Deal with Fuel Line Leakage?

When a vehicle's fuel line is leaking, you must not continue driving to avoid potential safety hazards during operation. After discovering a fuel line leak, immediately seek assistance from professional repair shops or 4S dealerships to promptly address the issue and prevent unnecessary complications.
1
5
Share

How to adjust the throttle cable?

Canned spray-type oil film remover works very well for removing oil film. Just spray for 3 seconds within the wiper's sweeping range to remove the oil film. Remove the cap and press the bottle firmly to spray the liquid. Spray it within the wiper's operating range on the windshield, with a usage method roughly similar to the spray type.
11
1
Share

What to do if the fuel gauge doesn't move after overfilling the tank?

There is a small chip sensor at the very top of the fuel float. It might get dirty due to poor fuel quality, requiring cleaning with an eraser. After removing the instrument panel, use a multimeter and a large needle to locate and test the circuit corresponding to the fuel gauge on the panel. Then proceed with the appropriate repairs.
17
5
Share

How to Use Oil Film Remover?

Thoroughly sand the area that needs repair, then apply glue to the area that needs repair. Use an electric soldering iron to weld the damaged area. First, tilt the oil tank to temporarily stop the oil leak. Wipe the leaking area, apply glue to the leaking area, and wait for the glue to dry.
2
2
Share

How to Stop an Oil Drum Leak?

Thoroughly sand the area that needs repair, then apply glue to the area that needs patching. Use a soldering iron to weld the damaged area. Tilt the oil drum so that the leak stops temporarily. Wipe the leaking area, apply glue to the leak, and wait for the glue to dry completely.
20
5
Share

What to Do When the Fuel Gauge Doesn't Show Fuel Level?

Remove the fuel float from the fuel tank, clean it, repair it, and try again. If it still doesn't work, consider replacing it. The above phenomenon occurs due to poor contact between the main fuel level sensor and the auxiliary fuel level sensor. It is recommended to replace the relevant sensors.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.