···
Log in / Register

What does the dashboard display when the Volkswagen Lavida is powered on?

3 Answers
AshleyDella
07/29/25 11:31pm
When the car is powered on, the computer needs to perform a self-check, and the fault lights will illuminate. After the self-check is completed, the fault lights will turn off. Types of fault lights: Exhaust temperature warning light: Since a three-way catalytic converter is installed on the exhaust pipe, the exhaust temperature increases. However, excessively high exhaust temperatures can easily damage the three-way catalytic converter, so such cars are equipped with an exhaust temperature warning device. Brake warning light: The brake warning light is red. If the red brake warning light illuminates, it indicates severe wear of the brake system's friction pads, low brake fluid level, or the parking brake being engaged (parking brake switch closed). In general, if the red brake warning light illuminates, the ABS warning light will also illuminate simultaneously, as ABS cannot function properly if there is a fault in the conventional brake system. Car indicator lights: Indicator lights include signal lights, turn signal lights, parking lights, etc., which serve to indicate the status of various vehicle functions.
Was this review help?
3
0
Share
LeMax
08/16/25 2:21am
I just bought a Volkswagen Lavida, and the dashboard lights up like a Christmas tree when I turn on the power! All sorts of lights flash: the airbag icon looks like a little person covering their head, the ABS warning is a circle with an exclamation mark, and the engine light indicates the system self-check. These lights stay on for a few seconds and then turn off, showing the car is checking everything is OK. The speedometer and tachometer needles also move and then return to zero, which looks pretty cool. The center screen usually displays the total mileage, current time, and sometimes a fuel reminder pops up, telling me how much gas is left. The first time I experienced it, I was a little excited and thought the car was broken, but later I learned it's a normal procedure. Now, every time I turn on the power, I wait for the lights to go off before starting the engine, so I can hit the road with peace of mind. If a light stays on, like the engine icon, there might be a problem that needs fixing. Paying attention to this self-check process can help detect potential issues early.
Was this review help?
6
1
Share
Expand All
Robyn
10/19/25 2:32am
I've been in the auto repair industry for quite some time and know the dashboard display sequence when the Volkswagen Lavida is powered on. Various warning lights like the airbag, ABS, and oil pressure lights illuminate for a few seconds as part of the vehicle's self-diagnostic procedure. If these lights turn off within the normal timeframe, it indicates the systems are functioning properly. If they remain lit, it may signal potential issues such as battery or engine problems. Analog gauges like the speedometer and tachometer reset to zero, while the information screen displays the odometer reading, current time, and temperature. I recommend developing a good habit: always observe the light status when powering on and avoid rushing to start the engine. Regular checks can prevent minor issues from escalating into major repairs. Daily maintenance is simple—keep the dashboard clean to prevent dust buildup that might affect display visibility. This self-check design is quite intelligent, helping drivers monitor safety.
Was this review help?
6
3
Share
Expand All
More Forum Discussions

What Are the New Technologies in Automotive Detailing?

Automotive detailing new technology is film application. The following are specific introductions to the benefits of automotive glass film: 1. Heat and Sun Protection: The film can effectively block a large amount of heat generated by infrared rays. 2. UV Protection: Medium and long waves in ultraviolet rays can penetrate thick glass, but applying a heat-insulating film can block most UV rays, preventing skin damage and reducing the aging of car interiors. 3. Safety and Explosion Protection: The base layer of the film is made of polyester, which has excellent tear and puncture resistance. Combined with the adhesive layer of the film, the strength of the glass after film application can prevent injuries to drivers and passengers caused by accidental glass breakage.
20
1
Share

What Does a Friction Clutch Consist Of?

A friction clutch consists of four main parts: the driving part, the driven part, the pressing mechanism, and the operating mechanism. The driving part, driven part, and pressing mechanism are the fundamental structures that ensure the clutch remains engaged and transmits power, while the operating mechanism is primarily the device used to disengage the clutch. The working principle of a friction clutch is as follows: 1. The engine flywheel serves as the driving component of the clutch, while the driven disc with friction linings and the driven hub are connected to the driven shaft via sliding splines; 2. The pressing spring forces the driven disc against the flywheel's end face; 3. The greater the pressing force of the spring, the larger the torque the clutch can transmit.
12
2
Share

How long does it take to fully charge a dead car battery with a charger?

A dead car battery typically takes 10 to 12 hours to fully charge with a charger. The reasons for a dead car battery include: 1. Prolonged vehicle inactivity leading to battery discharge; 2. Battery reaching the end of its service life; 3. Engine damage; 4. Insufficient battery electrolyte or leakage; 5. Blown fuse causing battery power loss; 6. Corrosion of battery terminals. Battery maintenance methods include: 1. Avoid overusing the battery; 2. Regularly clean the positive and negative terminals; 3. Periodically check the vent holes on non-maintenance-free battery covers to prevent clogging; 4. Avoid low battery water levels.
16
2
Share

Why is the car air conditioning pipe cold but the air outlet not cold?

Car air conditioning air outlet is not cold because the fuse has been burned out or the air outlet switch is not connected properly, resulting in a short circuit. The following is relevant information: 1. Car air conditioning: Car air conditioning refers to the air conditioning device installed in the car, which can cool, heat, ventilate and purify the air in the compartment, providing a comfortable riding environment for passengers, reducing the driver's fatigue and improving driving safety. 2. Composition: Car air conditioning generally includes refrigeration devices, heating devices and ventilation devices. This combined device makes full use of the limited space inside the car, with a simple structure and easy operation, and is currently the internationally popular modern car air conditioning system.
18
2
Share

What is the P with Signal Button in a Car?

The button with a P and signal in a car is the reverse radar switch. The full name of the reverse radar is the reverse anti-collision radar. Here is a detailed introduction to the P with signal in a car: 1. Composition: It consists of ultrasonic sensors (commonly known as probes), a controller, and a display (or buzzer). 2. Function: It informs the driver about surrounding obstacles through sound or a more intuitive display, eliminating the troubles caused by the driver's need to look around when parking, reversing, or starting the vehicle. It also helps the driver overcome blind spots and unclear vision, improving driving safety. The reverse radar is also known as the parking assistance system or the reverse computer warning system.
18
1
Share

What is the fuel consumption of the 8th generation Honda Civic?

This car has a fuel consumption of 7.9 liters per 100 kilometers. Here are specific methods to reduce fuel consumption: 1. Lightly press the accelerator: When the car starts at low speed, it is the peak fuel consumption period. Therefore, lightly pressing the accelerator during startup and preventing excessively high RPM can effectively reduce fuel consumption. 2. Avoid high RPM: Try to avoid unnecessary high RPM as fluctuating engine speeds can significantly increase fuel consumption. 3. Regular maintenance: Change the engine oil and remove carbon deposits. 4. Avoid emergency braking: Anticipating road conditions in advance not only improves driving safety but also saves fuel. For example, gradually slowing down before traffic lights and utilizing inertia to coast.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.