What does the D gear mean?

What engine is used in the Dongfeng Fengshen AX7?

Dongfeng Fengshen AX7 uses an engine from the French PSA Group. The engine model of Dongfeng Fengshen AX7 is DFMC15TP1, with a maximum power of 140 kW, maximum torque of 300 Nm, maximum horsepower of 190Ps, maximum power speed of 5200 rpm, and maximum torque speed range of 2000-4000 rpm. For daily maintenance of the Dongfeng Fengshen AX7 engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional devices in the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, which can cause various problems for the engine. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level; When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear; Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.

13

3

Share

Where is the air filter of the Kuga located?

The air filter of the Kuga is located on the left side of the fuse box under the front passenger seat. Screw holes can be observed on the cover, but no screws are actually used. It is secured only by clips on the plastic cover. Gently pry it open with a pry bar to reveal the air filter. The Kuga's body dimensions are 4524 mm in length, 1838 mm in width, and 1701 mm in height, with a wheelbase of 2690 mm. The vehicle is equipped with either a 1.5T or 2.0T engine, with maximum output power of 181 kW and 245 kW respectively, paired with a 6-speed automatic transmission. The 2.0T model also features a four-wheel drive system. The interior is equipped with a 10-inch central control LCD display, embedded with a new Internet-based intelligent car system. The central control supports multi-touch and smartphone connectivity, enabling features such as remote vehicle start, online music, and intelligent food recommendations.

18

5

Share

How many seconds does the Outlander take to accelerate from 0 to 100 km/h?

The time required for different Outlander models to accelerate from 0 to 100 km/h is as follows: The 2.0L model takes 11.4 seconds, while the 2.4L model takes 10.1 seconds. Here is some relevant information: The Outlander is a compact SUV under Mitsubishi, equipped with two engines: a 2.0L naturally aspirated engine and a 2.4L naturally aspirated engine. Introduction to the two Outlander engines: 1. The 2.0L naturally aspirated engine delivers 166 horsepower and a maximum torque of 201 Nm. This engine reaches its maximum power output at 6,000 rpm and its maximum torque at 4,200 rpm. It features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with a CVT transmission. 2. The 2.4L naturally aspirated engine has a maximum power of 141 kW and a maximum torque of 235 Nm. It achieves maximum power at 6,000 rpm and maximum torque at 4,200 rpm. This engine also features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a CVT transmission.

1

3

Share

How to Start a Hyundai Car When the Key Fob Battery Dies?

Methods to start a Hyundai car when the key fob battery dies: 1. You can use the mechanical key to start the car; 2. If the key is a proximity key, after pulling out the mechanical key from the top of the fob, you will see a keyhole on the door handle. Open the door and press the proximity key against the push-button start switch to start the vehicle. However, this is only an emergency method, and you should replace the key fob battery as soon as possible. Taking the Hyundai Elantra as an example, its body dimensions are 4570mm in length, 1775mm in width, and 1445mm in height, with a wheelbase of 2700mm. Its front face still adopts the typical family design, with fewer sharp lines but more fullness, making it look more harmonious and moderate. The grille is fully chrome-plated, giving it a more fashionable and upscale appearance.

19

3

Share

What is the minimum ground clearance of the Honda Avancier?

The minimum ground clearance of the Honda Avancier is 203mm when unloaded, and it reduces to 190mm when fully loaded. The vehicle's body dimensions are 4816mm in length, 1942mm in width, and 1669mm in height, with a wheelbase of 2820mm. The Avancier is equipped with a 2.0T turbocharged engine featuring dual VTC (Variable Timing Control) technology and VTEC (Variable Valve Timing and Lift Electronic Control) technology on the exhaust side. It delivers a maximum power of 200kW and a peak torque of 370Nm. The traditional gear lever is replaced by a 9-speed automatic transmission with SBW (Shift-By-Wire) electronic push-button shifting. The car offers three driving modes: Snow Mode, Sport Mode, and Comfort Mode, providing a driving experience that surpasses its class.

19

4

Share

Is the BMW i8 a Hybrid?

The BMW i8 is indeed a hybrid, equipped with both an internal combustion engine and an electric motor. The BMW i8 is a sports car powered by a 1.5-liter turbocharged engine, which delivers a maximum power of 170 kW and a peak torque of 320 Nm. This engine features direct fuel injection technology and utilizes an aluminum alloy cylinder head and block. The electric motor paired with this engine provides a maximum power of 96 kW and a peak torque of 250 Nm. The BMW i8 measures 4689 mm in length, 1942 mm in width, and 1282 mm in height, with a wheelbase of 2800 mm. In terms of exterior design, the car retains the iconic kidney grille at the front, complemented by a blade-inspired front bumper designed to reduce aerodynamic drag. It also features concealed door handles and frameless butterfly doors, enhancing the vehicle's aesthetic appeal.

9

5

Share

What does the D gear mean?

What engine is used in the Dongfeng Fengshen AX7?

Where is the air filter of the Kuga located?

How many seconds does the Outlander take to accelerate from 0 to 100 km/h?

How to Start a Hyundai Car When the Key Fob Battery Dies?

What is the minimum ground clearance of the Honda Avancier?

Is the BMW i8 a Hybrid?

Which engine is used in the Haval H6?

How often should the transmission fluid be changed for the Magotan?

What are the engine displacements available for the Haval H6?

How to Release the Foot Brake When Starting the Murano?