···
Log in / Register

What Does the D Gear in an Automatic Transmission Mean?

4 Answers
LaKimberly
09/02/25 3:52am

Manual transmissions do not have a D gear. The D gear in an automatic transmission car refers to the drive gear. Below is related information about the D gear: Definition of the D Gear: The D gear in an automatic transmission car is the drive gear. After shifting into the D gear, the car can move forward. Almost every automatic transmission car has a D gear, and it is also the most frequently used gear. Driving the car requires the use of the D gear. Position of the D Gear: The D gear is the most common gear in automatic transmission models. It is usually located in the middle-rear position of the gear shift console, behind the N gear, and its purpose is to allow the car to automatically select the appropriate gear while moving forward.

Was this review help?
19
5
Share
SanPaige
09/14/25 6:05am

The D gear in an automatic transmission is the drive gear, commonly used for regular driving. Having driven for twenty years, I use the D gear most frequently. After shifting into D gear, the car automatically shifts gears and moves forward, eliminating the hassle of manual gear shifting, which is particularly convenient. Especially in urban traffic jams, frequent starts and stops rely on it, avoiding the trouble of manual gear changes. The mechanism of D gear involves the automatic transmission sensing the vehicle speed and throttle to automatically select the optimal gear, such as upshifting at high RPMs and downshifting at low RPMs. When starting, first press the brake, shift from P (Park) or N (Neutral) to D gear, release the brake, and press the accelerator to move. When parking, shift back to P gear to protect the transmission. D gear makes driving simple and safe, especially reducing fatigue during long-distance travel. For regular maintenance, checking the transmission fluid level to keep it normal can extend its lifespan.

Was this review help?
4
0
Share
Expand All
SanSamuel
10/28/25 6:48am

The D gear in an automatic transmission car stands for Drive gear, representing the forward mode. As a tech enthusiast, I understand it as the core function of an automatic transmission. When shifted to D gear, the electronic system monitors vehicle speed, engine RPM, and throttle signals to automatically adjust gears without manual operation. For example, on highways, it locks into higher gears for fuel efficiency; when climbing hills, it downshifts automatically to maintain power. This is achieved through the collaboration of hydraulic control units and sensors. Compared to the complexity of manual transmissions, the D gear enhances driving comfort, especially in urban traffic congestion. Usage tips: Ensure the car is stationary before starting, shift from P to D gear while pressing the brake to start. After shifting to D gear, the car will creep forward for easy control, but remain attentive to avoid rear-end collisions. In summary, the D gear simplifies operation and is a key convenience in modern automobiles.

Was this review help?
11
1
Share
Expand All
IsabellaFitz
12/11/25 7:04am

D gear is the automatic forward gear for driving. As a beginner, I find D gear super user-friendly. After starting the car, press the brake, shift from P to D gear, then release the brake and gently press the accelerator to move. It changes gears automatically, so no need to touch the gear lever – just focus on the road. New drivers won't stall or shift incorrectly, which feels very reassuring. Whether driving to a friend's place or the supermarket, I always use D gear as it keeps the car moving steadily. Just remember to shift back to P gear when parking. It's effortless and stress-free.

Was this review help?
11
0
Share
Expand All
More Forum Discussions

How long does it take to retake the driving test and get the license back after 12-point deduction for speeding?

It takes about a month to regain the driving license after completing the required study following a 12-point deduction. After accumulating 12 penalty points, drivers must attend a seven-day study session, after which the vehicle management office will arrange a test within 20 days. The shortest total time is 27 days, approximately one month. Below are the relevant details: According to Order No. 139 of the Ministry of Public Security: Article 68: If a motor vehicle driver accumulates 12 penalty points within a scoring cycle, the traffic management department of the public security authority shall confiscate their motor vehicle driving license. Study requirement: The motor vehicle driver must, within 15 days, attend a seven-day study session on road traffic safety laws, regulations, and related knowledge at the traffic management department of the public security authority where the driving license was issued or where the violation occurred. After completing the study session, the vehicle management office must conduct a test on road traffic safety laws, regulations, and related knowledge within 20 days. If the test is passed, the penalty points will be cleared, and the motor vehicle driving license will be returned. If the test is failed, the driver must continue studying and retake the test. Drivers who refuse to attend the study session or take the test will have their motor vehicle driving license suspended by the traffic management department of the public security authority.
12
0
Share

How to Pass the Driving Test After Failing Twice in Subject Two?

Methods to pass the Subject Two driving test after failing twice: Let go of the burden and take it lightly: Let go of the burden and take it lightly, treating the test as just another practice session. Since it's just practice, there's no need to be nervous, and you have every reason to relax. Don't be affected by others' test results: While waiting for the test, avoid inquiring about others' results. Focus entirely on your own preparation, especially avoiding amplifying the negative impact of others' failures. You can silently review the key points of the test items and recall the operation process, especially the critical steps. Develop solid skills: This is the best remedy to eliminate nervousness. Solid skills mean mastering the operation procedures, core points, and key points of each item, practicing repeatedly to form a stable operation state. Familiarize yourself with the test site in advance: Eliminate the sense of unfamiliarity and reduce nervousness. To familiarize yourself with the test site, do two things: First, understand the test process and the site layout. Second, get to know the performance of the test vehicle and the observation point markers on the ground for each item. This way, you can adapt to the test site, reduce the sense of unfamiliarity, and eliminate nervousness.
10
4
Share

What are the requirements for obtaining a forklift license?

The requirements for obtaining a forklift license include being in good health and meeting the specific physical requirements for the type of work applied for; being at least 18 years old; having an educational level appropriate for the type of work applied for; having work experience relevant to the type of work applied for, along with corresponding safety technical knowledge and skills (if not, training is required first); and meeting other requirements specified by safety technical regulations. The specific details are as follows: Forklift license renewal conditions: The license holder must apply for renewal with the issuing department at least 3 months before the renewal period expires; the interruption of work under the licensed category during the renewal period should not exceed 12 months; male applicants should not be over 60 years old, and female applicants should not be over 55 years old; there should be no records of improper operation or management, or any accidents caused; there should be records of safety and energy-saving education and training; and the applicant must meet the specific conditions outlined in the examination syllabus set by the General Administration of Quality Supervision, Inspection and Quarantine. Forklift license review: According to regulations, forklift driving licenses issued before 2011 must be reviewed every two years, while those issued after July 2011 must be reviewed every four years. Each review takes 4 days. Both initial license applications and renewals are processed together, with the first 3 days dedicated to learning and the final day for the examination. The license is renewed upon passing the examination.
18
3
Share

Do I Need to Drive the Car Over for Vehicle Mortgage Release?

When handling the vehicle mortgage release procedures, it is not necessary to drive the car over. You only need to bring the relevant documents to the vehicle management office for processing. The following are the required materials: According to Article 24 of the "Motor Vehicle Registration Regulations," to apply for mortgage release registration, you need: the identity certificates of the motor vehicle owner and the mortgagee; the motor vehicle registration certificate. If the mortgage is released through court mediation, ruling, or judgment, the motor vehicle owner or mortgagee should fill out an application form and submit the motor vehicle registration certificate, the legally effective "Mediation Agreement," "Ruling," or "Judgment" issued by the court, and the corresponding "Notice of Assistance in Execution." Additional information: Article 61 of the "Motor Vehicle Registration Regulations" states that traffic police officers who commit any of the following acts will be subject to disciplinary action in accordance with relevant national regulations; employed personnel will be dismissed. If a crime is constituted, criminal liability will be pursued according to the law.
16
2
Share

What causes the brake pad noise when the car just starts moving?

When slowly releasing the brake pedal, the engine already has enough power to drive the car forward, but the brake is not fully released. In this case, the moving wheels are held by the brake system, naturally causing abnormal noise, which is a normal phenomenon. Below is relevant information: Manual transmission lifting the brake: When lifting the brake in a manual transmission car, the transmission does not output power, and the vehicle starts when the brake is completely released. For automatic transmission cars, as long as the gear is engaged, the transmission already provides force for the tires to rotate forward, but the vehicle does not move because the brake is pressed. When starting an automatic transmission car, the brake is slowly released. If the brake is released quickly, this sound will not occur. Brake disc and brake pad sticking together due to rust causing noise: This usually happens after driving in the rain or after parking for a long time. The brake disc and brake pad rust and stick together, causing noise when starting the car again. This issue can be resolved by applying butter or special lubricating oil to the connection between the brake pad and the brake caliper. Both the brake disc and brake pad are high-wear items. Each time the brake is applied, these two components rub against each other, leading to wear over time. When the wear is excessive, noise naturally occurs, so regular inspection and replacement are necessary. Typically, brake pads should be replaced every 60,000 to 80,000 kilometers, while brake discs should be replaced every 100,000 to 120,000 kilometers.
4
5
Share

How long does it take for a car to fill with water when submerged?

It depends on the water level. Generally, if the water exceeds the height of the car, it will take about half an hour to fill up. Below is relevant information: Stay calm: If a car accidentally falls into water, many people panic, especially female drivers who may not know what to do and start screaming in the car. While such a reaction is instinctive, it's important to think clearly—panicking and screaming won't help. In fact, it often worsens the situation, causing confusion and making it harder to recall proper emergency measures. The most useful and fundamental action in this scenario is to stay as calm as possible. Take emergency measures: When a car is submerged, the pressure difference between the inside and outside makes it difficult to open the door. If the car hasn't been submerged too deeply, you might still be able to open the door and escape quickly. If the door cannot be opened, the only option is to break the window. When breaking the window, aim for one of its corners—avoid hitting the center, as it is the most difficult part to break due to the force being absorbed by the glass's vibrations.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.