What does the Crown Land Cruiser Hybrid mean?

Can You Change Lanes Over a Solid White Line in the Same Direction?

Generally, solid white lines are used to separate lanes in the same direction, and lane changes are not allowed. Purpose of White Lines: Solid white lines are a type of lane divider used to separate traffic moving in the same direction. They are typically marked with white dashed/solid or yellow dashed/solid lines. In most cases, solid white lines indicate that lane changes are prohibited. Penalties for Crossing Solid White Lines: Crossing a solid white line is considered a violation of traffic markings and can easily be captured by traffic cameras, leading to penalties. If caught by electronic surveillance or on-site police enforcement for dangerous actions such as overtaking, making U-turns, or reversing over solid white lines, the usual penalty is a fine and a deduction of 3 points from the driver's license.

1

3

Share

Are Engine Guards the Same as Chassis Armor?

Chassis armor and engine guards are not the same. The details are as follows: 1. Chassis armor is not a plate but a sprayed layer of paint, which is a protective film. Chassis armor is a high-tech adhesive rubber asphalt coating that protects the car's chassis during operation, preventing sand and stones from damaging the chassis. It also avoids rusting of the chassis during vehicle use, featuring non-toxicity, high coverage, and strong adhesion. 2. Engine guards are custom-designed protective devices for engines based on different car models. They are designed to prevent mud from covering the engine, which could lead to poor heat dissipation, and to protect the engine from impacts caused by uneven road surfaces during driving, thereby avoiding engine damage and car breakdowns due to external factors during travel.

19

4

Share

What does Mercedes CDI mean?

CDI is the acronym for common-rail-diesel-injection, which means diesel common rail, indicating that this Mercedes is equipped with a diesel engine. Additional information: 1. The common rail system separates fuel pressure generation from fuel injection. If unit pump diesel injection technology is considered a revolution in diesel technology, then common rail can be called a rebellion, as it deviates from traditional diesel systems and resembles sequential gasoline injection systems. The common rail system has opened new pathways for reducing emissions and noise in diesel engines. 2. Engine operation requires high-voltage electrical ignition. The traditional method uses contact switches to connect or disconnect the magnetic circuit of the ignition coil, generating high voltage through induction between the primary and secondary coils. CDI replaces these mechanical contact switches with capacitors and thyristor diode circuits, achieving contactless ignition.

5

2

Share

What is the correct procedure for an automatic transmission car at a red light?

Automatic transmission cars have two methods when waiting at a red light: shifting to neutral and applying the handbrake, or staying in D gear while pressing the brake pedal. The neutral and handbrake method is suitable for situations where the light has just turned red or when the remaining red light duration is long. Shifting to neutral cuts off engine power, and applying the handbrake prevents the vehicle from moving, thus freeing the right foot from continuously pressing the brake. The D gear and brake method is suitable when the red light has about ten seconds left or in stop-and-go traffic, allowing for quick acceleration without frequent gear changes. Never shift to P gear when waiting at a red light in an automatic transmission car. If you shift to P gear and the vehicle behind fails to react in time, causing a rear-end collision, the locking mechanism could be damaged, and in severe cases, the transmission could be rendered useless.

3

1

Share

How to Read Tire Specifications and Models?

Method for reading tire specifications and models: Tire specifications are commonly represented by a set of numbers. The first number indicates the tire section width, and the latter denotes the rim diameter, measured in inches. For example, 165/70R14 represents a radial tire with a width of 165mm, an aspect ratio of 70, and a rim diameter of 14 inches. Tires can be categorized into approximately 8 types based on vehicle type: PC (Passenger Car) tires, LT (Light Truck) tires, TB (Truck and Bus) tires, AG (Agricultural) tires, OTR (Off-The-Road) tires for engineering vehicles, ID (Industrial) tires, AC (Aircraft) tires, and MC (Motorcycle) tires. By usage, tires include load-bearing tires, passenger vehicle tires, and mining tires, among others.

18

2

Share

Is the Engine of the Everest Imported?

The engine of the Everest is not imported; it is produced domestically at the Jiangling Ford engine production base. In terms of power, the Everest is equipped with two types of engines: a 2.0-liter turbocharged gasoline engine and a 2.2-liter turbocharged diesel engine. The Everest measures 4892 mm in length, 1862 mm in width, and 1837 mm in height, with a wheelbase of 2850 mm. Exterior-wise, the Everest features a front fascia with extensive chrome accents, a sharply contoured bumper, and an oversized inverted trapezoidal grille. The body follows the design language of American muscle cars, exuding a robust and tough appearance.

3

Share

What does the Crown Land Cruiser Hybrid mean?

Can You Change Lanes Over a Solid White Line in the Same Direction?

Are Engine Guards the Same as Chassis Armor?

What does Mercedes CDI mean?

What is the correct procedure for an automatic transmission car at a red light?

How to Read Tire Specifications and Models?

Is the Engine of the Everest Imported?

What are the hidden features of the 2018 Geely Vision?

Are There Three-Cylinder Engines Abroad?

Can Audi Antifreeze Be Mixed?

Which city has license plates starting with 'Dong'?