What does the Chery Ant maintenance include?

2 Answers
SanAlan
08/27/25 6:04am
Chery Ant maintenance mainly involves checking the power battery, chassis, wiring harness, etc., followed by replacing the air conditioning filter. The relevant introduction of Chery Ant is as follows: Dimensions: The Chery Ant is a micro electric vehicle. The car has a wheelbase of 2150 mm, with a length, width, and height of 3200 mm, 1670 mm, and 1550 mm respectively. It is a hatchback model. Powertrain: The Chery Ant is a single-motor model. The motor is rear-mounted, making it a rear-wheel-drive vehicle. The motor has a maximum power of 30 kW and a maximum torque of 120 Nm. The car uses lithium-ion batteries, which have higher energy density and are lighter in weight. Suspension: The Chery Ant uses MacPherson independent suspension for both front and rear. The MacPherson suspension is a simple-structured independent suspension and is widely used.
Was this review help?
20
0
Share
DeIsabela
09/09/25 4:58am
As an owner of the Chery Ant, the focus of maintenance is on battery health checks, as it directly affects the driving range. I regularly visit the 4S shop every six months to test the battery capacity and degradation, which helps avoid the risk of being stranded on the road. Motor maintenance also requires a bit of attention—though not as complex as a fuel engine, it should run smoothly without unusual noises. Chassis components like the suspension and steering system need adjustments; although electric vehicles are lightweight, frequent bumps can loosen parts and affect handling. Software updates are extremely important—I always download OTA updates promptly to improve the infotainment system's efficiency and safety features. Rotate the tires to balance wear, check the brake pads and feedback performance, and replace the cabin air filter regularly to keep the air fresh and odor-free. Small details like lights and wipers shouldn’t be overlooked—maintenance is simple, but every task must be done properly. Overall, EV maintenance frequency is low, but doing it thoroughly prevents surprises, saving money and ensuring peace of mind for a steady driving experience.
Was this review help?
17
0
Share
Expand All
More Forum Discussions

What are the handling methods for obscured license plates?

The penalty for obscuring a license plate is the same as that for altering a license plate. According to the "Road Traffic Safety Law of the People's Republic of China," motor vehicle license plates must be hung as required and kept clear and intact, and must not be deliberately obscured or defaced. Those who deliberately obscure, deface, or fail to install motor vehicle license plates as required will be given a warning or fined. Additionally, under the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," driving a motor vehicle on the road without a license plate or deliberately obscuring, defacing, or failing to install a license plate as required will result in a 12-point deduction. If 12 points are deducted, the driver must attend a seven-day legal education session at the location where the driving license was issued or where the violation occurred, followed by a retake of the theoretical driving test (Subject One). Only after passing the test can the driver resume driving. Obscuring a license plate is strictly prohibited by traffic regulations, and being caught will result in an immediate 12-point deduction. Therefore, drivers should ensure their license plates remain clear and unobstructed. Article 58 of the "Regulations on the Application and Management of Motor Vehicle Driving Licenses" states that if a motor vehicle driver accumulates 12 points within a scoring cycle, the traffic management department of the public security authority shall confiscate their driving license. The driver must report to the traffic management department of the public security authority at the place where the license was issued or where the violation occurred within 15 days to attend a seven-day course on road traffic safety laws, regulations, and related knowledge. After completing the course, the vehicle management office must administer a test on road traffic safety laws, regulations, and related knowledge within 20 days. If the driver passes the test, the points will be cleared, and the driving license will be returned. If the driver fails, they must continue attending the course and retake the test. Those who refuse to attend the course or take the test will have their driving license suspended by the traffic management department of the public security authority.
2
2
Share

Can a dented car fender be pulled out?

Fender dents can be pulled out. Here is relevant information: 1. Introduction: The fender (also called wing panel) is a covering component on motor vehicles and non-motor vehicles. It includes front fender, front fender liner, front fender lamp, rear fender lamp, and radiator frame. 2. Function: Located outside the wheel on the car body, the fender serves as a protective cover. It not only reduces wind resistance coefficient during driving according to aerodynamics, greatly improving the car's stability, but also prevents gravel and mud kicked up by wheels from splashing onto the bottom of the vehicle compartment, thereby protecting the car's chassis.
18
1
Share

Escalade's Fuel Consumption

Escalade's fuel consumption is 11.2L/km. Below is relevant information about the Escalade: 1. Concept: The Escalade is a full-size luxury SUV, adopting the new design philosophy of the Cadillac Sixteen concept car. 2. Powertrain: The Escalade is equipped with a 6.2L V8 engine, delivering up to 403 horsepower. The average combined fuel consumption is 11.2 liters per 100 km; maximum output power 403 hp/5700 rpm; peak torque 565 Nm/4400 rpm; 0-100 km/h acceleration time is just 6.8 seconds; dual variable valve timing (D-VVT); electronic throttle control (ETC). 3. Exterior Design: Jewel-like headlights, chrome metal design (7-layer chrome side body lines).
1
1
Share

At how many kilometers should the first maintenance of BMW 5 Series be performed?

BMW 5 Series requires its first maintenance at 10,000 kilometers or after 12 months, whichever comes first. Here is more information about car maintenance: 1. Definition: Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car. Different manufacturers and different car models have varying maintenance items and cycles, so it is necessary to follow the maintenance schedule provided with the car for proper upkeep. 2. Purpose of the first maintenance: The first maintenance ensures the vehicle's excellent performance; improves driving safety; reduces engine noise; and extends the vehicle's service life.
11
2
Share

How Often Should Vehicle Sealing Strips Be Replaced?

Vehicle sealing strips should be replaced every three to four years. Below is relevant information about vehicle sealing strips: 1. Function: Automotive sealing strips serve to fill various gaps and spaces between vehicle body components, providing functions such as shock absorption, waterproofing, dustproofing, sound insulation, and decoration, thereby enhancing driving comfort and protecting the vehicle body. 2. Characteristics: In low-temperature resistance tests at -40℃, the sealing strips do not harden or become brittle, maintaining their softness and excellent adhesive strength, demonstrating superior cold resistance. Even at high temperatures of 120℃, the weather resistance of the sealing strips remains excellent, with elasticity, form, and functionality unaffected.
2
5
Share

What Causes the Squeaking Sound from Car Doors While Driving?

Squeaking sounds from car doors while driving are typically caused by aging door seals. Below is relevant information about car doors: 1. Design Requirements: Ensure convenient passenger access with maximum opening angle controlled at approximately 65°-70°. Doors should not interfere with other components during operation, must lock securely when closed, and must not open automatically while driving. 2. Definition: Car doors provide entry/exit passages for drivers and passengers while isolating external disturbances. They offer some protection against side impacts and contribute to vehicle aesthetics through their design. Door quality is primarily reflected in: impact protection performance, sealing performance, and opening/closing convenience, along with other functional indicators. Impact protection is particularly crucial as side collisions offer minimal buffer distance, making passengers vulnerable to injury.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.