What Does the Car Tire Model Number Mean?

What does a key symbol on the dashboard mean?

If a key symbol appears on the dashboard, it means the vehicle is not detecting the car key. Reasons why the car is not detecting the key: 1. The car's receiver module is damaged. 2. The key's transmitter module is damaged. 3. The key battery is dead. Steps to replace the car key battery: 1. Purchase the original battery for the car key, ensuring the voltage and model are the same. 2. Remove the mechanical key, usually by pressing a small button and then pulling it out. 3. Use a small flat-head screwdriver to pry open the car key. There will be a small gap in the middle of the key, and it can be gently rotated to open. 4. Pry out the old battery, install the new one, and then reassemble the car key.

16

5

Share

Can ETC only be processed for vehicles under one's own name?

ETC can also be processed by someone other than the vehicle owner. According to the "Implementation Plan for Accelerating the Application Service of Electronic Non-stop Toll Collection on Expressways" issued by the Ministry of Transport, the original valid ID card of the vehicle owner, the original and copy of the vehicle registration certificate (the page with the latest annual inspection stamp) are required. If processing on behalf of others, the original valid ID card of the agent is also required. If applying for ETC through major bank branches, a corresponding bank debit card or credit card must be prepared. Some banks only support ETC binding with credit cards, while others may require freezing a certain amount as a deposit when binding ETC with a debit card. ETC Billing Principle: There will be one or more ETC lanes on the expressway. Through dedicated short-range microwave communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane of the toll station, computer networking technology is used for backend settlement with the bank, achieving the purpose of paying tolls without stopping at the toll station. All this is based on the principle of passing first and deducting fees later. Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in line; Green and eco-friendly: Low-carbon, vehicles pass through toll stations without stopping, reducing noise and exhaust emissions, and minimizing pollution; Reduced wear and tear: Saves costs, reduces the frequency of vehicle starts and brakes, lowering wear and fuel consumption; Improved efficiency: The theoretical efficiency of ETC lanes can be increased by 2-3 times, making traditional ETC updates faster and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More Policy Support: The State Council clearly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, the interoperability of transportation smart cards in key city clusters will be basically achieved, and the proportion of vehicles equipped with ETC will be significantly increased." It also set a target in the "13th Five-Year" comprehensive transportation development indicators: "By 2020, the ETC usage rate for road passenger vehicles should reach 50%." More Future Possibilities: In addition to continuously improving the convenience of ETC installation and usage and the ETC usage rate for passenger vehicles, future efforts will also promote the use of ETC for trucks and explore the deep integration of ETC systems with smart transportation development directions such as vehicle-to-vehicle communication and vehicle-road coordination, providing comprehensive travel services for vehicle owners. This means more application scenarios will support ETC applications. ETC Usage Precautions: The ETC transaction sensing area is 8 meters. When encountering a stationary vehicle ahead, to prevent the vehicle's ETC device from malfunctioning or not having an ETC device at all, maintain a distance of more than 10 meters to avoid automatic sensing and paying for the vehicle ahead. The recognition speed for ETC lane passage is 20 km/h. If the speed is too fast, the vehicle's device information cannot be read, leading to billing failure. Unauthorized disassembly or movement of the OBU device, or detachment or loosening of the ETC electronic tag, will cause the electronic tag to fail. It can be sent to the bank where the ETC card was processed or the expressway service office for testing. If the loosening or detachment is not man-made, it only needs to be reactivated. When using a debit card bound to ETC, insufficient balance will also cause billing failure. Follow the guidance of on-site staff to use the manual MTC lane and pass by cash or card. Poor sensing due to overly thick car windshields. Special attention is needed for vehicles that have had their windshields replaced after accidents or those with modified front windshields.

3

4

Share

What is the proper position to adjust the rearview mirror?

The rearview mirror should be adjusted to a position where approximately one-third of the sky and two-thirds of the ground are visible. A car rearview mirror is a convex mirror that allows the driver, while seated in the driver's seat, to directly obtain external information about the rear, sides, and lower areas of the vehicle. For the convenience of the driver, to prevent traffic safety accidents, and to ensure personal safety, all countries mandate that vehicles must be equipped with rearview mirrors, and all mirrors must be adjustable in direction. For mirrors that do not provide a full field of view, a wide-angle mirror (small round mirror) can be added to the corner to ensure a broader view of the road conditions. Rearview mirrors have different reflectivity during the day and night, which is related to the reflective coating material on the inner surface of the mirror. The higher the reflectivity, the clearer the image reflected by the mirror. The angle of the rearview mirror also differs between day and night, so when replacing a rearview mirror, it is important to choose one with a reasonable curved design.

2

1

Share

What are the symbols for high beam and low beam headlights?

The symbol for high beam headlights is blue, with the light beam angle straight and not tilted; the symbol for low beam headlights is green, with the light beam angle tilted downward. Low beam headlights are designed for close-range illumination. High beam headlights adjust the intensity of light based on the distance of the filament. The high beam focuses the light to emit parallel rays, which are more concentrated and brighter, capable of illuminating distant and high objects. Low beam headlights are designed to have a wide illumination range (160 degrees) but a short illumination distance, with non-adjustable focus. They illuminate objects within a range of about 30 to 40 meters, emitting light in a divergent pattern to cover a larger area nearby.

12

1

Share

How to conduct the annual inspection for a new car in its second year?

New cars in their second year undergo the annual inspection as follows: 1. Fill out the application form and prepare the required documents; 2. Submit the application materials; 3. Review traffic violations and accident records; 4. Receive the inspection pass sticker and a copy of the signed vehicle license. Vehicle annual inspection, also known as motor vehicle annual inspection, refers to the standard procedure for inspecting vehicles each year. Required materials for the inspection include: Motor Vehicle License Plate Application Form (for vehicles exempt from on-site inspection within 6 years), original and photocopy of the vehicle owner's ID, vehicle license, compulsory traffic accident liability insurance certificate, and vehicle and vessel tax payment or tax exemption certificate.

14

3

Share

What types of vehicles can a C2 driver's license drive?

C2 driver's license can drive small automatic transmission vehicles. The C2 driver's license is one of the more common types of driver's licenses, which only allows the holder to drive automatic transmission vehicles with fewer than 9 seats and a length not exceeding 6 meters. A driver's license, also known as a driving permit, is a document issued by the government transportation department to individuals who qualify to drive, usually in the form of a card. To obtain a driver's license, the driver needs to register, then complete learning, training, and assessment before the traffic police department of the Ministry of Public Security issues a qualified driving certificate. The driver's license usually specifies the types of motor vehicles the holder is allowed to drive, such as motorcycles, passenger cars, trucks, and buses.

20

2

Share

What Does the Car Tire Model Number Mean?

What does a key symbol on the dashboard mean?

Can ETC only be processed for vehicles under one's own name?

What is the proper position to adjust the rearview mirror?

What are the symbols for high beam and low beam headlights?

How to conduct the annual inspection for a new car in its second year?

What types of vehicles can a C2 driver's license drive?

What does the exclamation mark on the car indicate?

What is the validity period of the driving skill test permit?

How to Drive a Manual Transmission Car in Heavy Traffic?

What does 'mute' mean in a car?