What does the car symbol on the car air conditioner mean?

2 Answers
Lauren
07/25/25 12:33am
It indicates the air recirculation mode. Below is an introduction to the function of air recirculation: 1. Provides insulation effect: The recirculation mode closes the airflow channel between the inside and outside of the vehicle. Without the fan, there is no airflow circulation, and when the fan is turned on, the airflow drawn in comes only from inside the vehicle, creating an internal airflow loop. The recirculation mode mainly prevents external dust and harmful gases from entering the vehicle promptly and effectively, such as when driving through areas with smoke, dust, unpleasant odors, or in heavy traffic, blocking harmful exhaust emissions from the vehicle ahead. Recirculation can enhance the cooling and heating effects of the air conditioner and provides better insulation. 2. Can quickly raise the temperature: In cold weather, after getting into the car, wait a moment until the engine temperature reaches the normal level, then turning on the heater in recirculation mode can quickly increase the temperature.
Was this review help?
14
4
Share
LaAbel
08/10/25 3:48pm
That little car icon on the car's AC panel – I've been driving for years and friends often ask about it. It actually represents the air recirculation mode switch, simply put, it controls where the air comes from. When the icon shows an arrow pointing from outside into the car, it means fresh air mode (external circulation), drawing in outside air. If the arrow forms a loop inside the car, it's recirculation mode (internal circulation), recycling existing cabin air. Why this design? Because it's extremely practical in real driving: use recirculation in traffic jams to avoid exhaust fumes, ensuring better air quality; switch to fresh air mode on highways or when windows can't be opened to maintain ventilation and reduce fatigue. I also recommend using fresh air mode on rainy or foggy days to help defog windows – never overlook this as it affects driving visibility and safety. Remember to regularly check the cabin air filter and use this button properly to make your AC system more durable, fuel-efficient, and odor-free. These small icons aren't just decorations – mastering them can significantly improve your driving experience!
Was this review help?
19
0
Share
Expand All
More Forum Discussions

Where is the compressor fuse located in the new Santana?

The compressor fuse of the new Santana is located next to the engine, in front of the steering wheel. You can see it by opening the hood. Replacement method: If any electrical equipment in the new Santana stops working during use, it may be due to a blown fuse and needs to be replaced promptly. To replace it, first turn off the ignition switch and open the fuse box cover, then replace the fuse. Precautions during operation: Replace the fuse according to the rated current value indicated on the fuse box cover. If the new fuse blows immediately, it indicates that there may be a fault in the circuit system, and it should be repaired as soon as possible. In case of emergency and without a spare fuse, it can be replaced temporarily. If a fuse with the same current load cannot be found, one with a lower rated current than the original fuse can be used as a substitute.
12
5
Share

Can the sunshade of the BMW 1 Series 120i Sport Night Edition be replaced?

The sunshade of the BMW 1 Series 120i Sport Night Edition can be replaced. If it cannot be removed, it is likely due to insufficient lubrication in the sunroof track. Lack of lubrication may lead to abnormal noises, poor movement, incomplete closure, or even jamming and misalignment over time, which could potentially burn out the motor. Here are some solutions: Perform a basic reset: Try performing a basic reset. Press and hold the sunshade switch to close the sunshade in an emergency. After closing, press and hold the forward button for 20 seconds. The sunshade will automatically open and then close again. Release the button once it is fully closed, indicating a successful reset. Service station setup: Hold the sunroof switch for more than 3 seconds, and both the sunroof and the shade will undergo one opening and closing cycle to complete the setup. If this does not work, you will need to visit a service station for professional computer setup.
16
5
Share

Does the Mercedes-Benz E300L belong to the C-segment?

Mercedes-Benz E300L belongs to the C-segment. Classification standards: In Germany, cars are classified into A00-segment (mini cars, such as QQ), A0-segment (small cars, such as Polo, Fit, etc.), A-segment (economy cars, such as Bora, Elantra, Excelle, Sunny, Familia, etc.), B-segment (mid-to-high-end cars, such as Passat, Accord, Mondeo, etc.), and C-segment (high-end cars, such as Audi A6, BMW 5 Series, Mercedes-Benz E-Class, etc.). The more rigid indicators are that A-segment cars are less than 4.5 meters in length, B-segment cars are more than 4.5 meters in length. The engine displacement of A-segment cars is generally 1.6--2.0 liters, while the displacement of B-segment cars is basically between 2.0--3.0 liters or higher. Definition of C-segment: C-segment cars are also known as mid-size or executive cars, with a wheelbase of approximately 2.6 to 2.8 meters and an engine displacement of 2.3 to 3.0 liters.
16
0
Share

What is the tire size for BMW 528?

The tire size for BMW 528 is 245/45R18. The first number 245 indicates the tire width is 245MM, 45 represents the aspect ratio of the tire section is 45%, meaning the section height is 45% of the width, the letter R stands for radial tire, and 18 indicates the rim diameter is 18 inches. The BMW 528 has a top speed of 180km/h, accelerates from 0-100km/h in 9.06 seconds, and has a fuel consumption of 8.3L per 100km. In addition to the size, tires also display the following common data: Tire cord material: Represented by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed the tire can carry a specified load under specified conditions. Letters A to Z represent the certified speed ratings from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Shows the rim size compatible with the tire for practical use, such as 'Standard Rim 5.00F'.
16
4
Share

Where to Place the ETC on the Car Windshield?

The installation position for small vehicle ETC is generally in the upper middle part of the front windshield, while for large vehicles such as trucks and buses, it is in the lower middle part. The appropriate installation position should be no lower than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 to 90 degrees. For vehicles with factory-installed or aftermarket explosion-proof film, which may affect microwave communication signal transmission, the ETC should be installed in the microwave sunroof strip. Here are the precautions for installing ETC: Do not obstruct the view; it's best to install it behind the rearview mirror: Many car models have windshields with a large rearward tilt angle, which reduces the driver's field of vision. If this is not considered during ETC installation, it can increase the driver's blind spots. Installing it behind the rearview mirror on the right side can help avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement because it has a solar panel on the back that can charge itself. Therefore, during installation, avoid the black areas on the windshield and positions that may block the solar panel. Do not remove it arbitrarily once installed: The button in the middle of the adhesive is an anti-removal lever connected to a switch. Once the electronic tag is installed on the windshield, the anti-removal lever is pressed in. If removed arbitrarily, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. You will then need to visit an ETC service point to unlock it. This mechanism is designed to prevent multiple vehicles from sharing one device. When using ETC, note the following: The ETC transaction sensing range is 8 meters. To prevent issues caused by the ETC device of the vehicle in front, maintain a distance of more than 10 meters from the vehicle ahead to avoid automatic payment for the preceding vehicle. The ETC lane recognition speed is 20 kilometers per hour; driving too fast may result in failure to read the vehicle's device information, leading to payment failure. When using a debit card linked to ETC, insufficient balance can also cause payment failure.
5
3
Share

What to Do When ETC Visa Fails?

ETC displaying label detachment means the device is currently unavailable and needs to be reinstalled and reactivated at the original processing point or any highway ETC service center. The ETC installation process is as follows: Upon receiving the device, first check if the ETC card and electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU, the red light will briefly illuminate, and the OLED screen will display "Visa Invalid" or "Please Insert Card," indicating the device is functioning normally. Clean the front windshield, ensuring the glass surface is smooth, clean, and dry. Then peel off the adhesive backing of the OBU and stick it to the installation position, pressing firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front side facing the driver and the back side facing the windshield, ensuring the chip is inserted into the OBU device. ETC activation method: Insert and remove the ETC card twice consecutively until the electronic tag screen displays "Bluetooth On." If "Tag Invalid" appears when inserting and removing twice without attaching the electronic tag, this is normal and does not affect activation. Alternatively, press the button on top of the electronic tag to enable Bluetooth directly. Turn on your phone's Bluetooth and open the corresponding mobile app (usually a download QR code is provided on the electronic tag), then enter the device activation interface. Click on device connection and wait patiently for the "Connection Successful" prompt. Once connected, upload a photo of the vehicle's front to complete activation.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.