What does the car off light mean?

2 Answers
Lynda
09/06/25 7:49am
Car off light is the anti-skid off indicator light. The purpose of this light is to remind the driver that the vehicle's anti-skid system has been turned off. At this time, the driver can continue to drive carefully or pull over as soon as possible to reactivate the vehicle's anti-skid function. The anti-skid control system is an active vehicle safety system that can greatly improve the vehicle's handling safety factor and driving convenience. In emergency situations such as sharp turns, sudden acceleration, and emergency braking, the vehicle can quickly detect and take corresponding braking measures, such as individually controlling each tire while reducing engine output to maintain vehicle stability.
Was this review help?
1
2
Share
DelBriella
09/18/25 7:28am
When I first started driving, I didn't understand what the 'OFF light' meant either. It's actually just an indicator light - when illuminated, it means a certain system is turned off, most commonly the air conditioning system. When you press the button and the light comes on, the AC stops running, which helps save fuel. Don't worry, it's designed to be quite intuitive - you'll get used to it after driving a few times. For example, the headlight switch sometimes has an OFF position too - if the light is on, it means the headlights aren't activated, just manually press the button to turn them on. I've also encountered situations where the light was on but I could still feel air blowing - might be a stuck button or poor contact, usually a slight push or restarting the car fixes it. These small lights in your car are just there to help you control functions - nothing complicated, just pay more attention to your dashboard.
Was this review help?
3
0
Share
Expand All
More Forum Discussions

How to Remove a Paint Protection Film?

Paint protection film removal method: 1. Start from the edge and locate the seal; 2. Peel from the edge, avoiding hard pulling—instead, use an inward-to-outward motion. If the film is made of TPU material, it can be completely removed quickly; 3. Any residual adhesive traces at the edge can be sprayed with tar remover and wiped off with a towel. A paint protection film is a high-performance, eco-friendly film widely used in the automotive detailing industry, commonly known as a transparent paint protection film. It offers excellent toughness and isolates the car's paint from the air, providing long-lasting protection.
5
0
Share

What Causes the Front Wheel Noise When Turning in a CR-V?

CR-V front wheel clunking noise during steering could be caused by insufficient lubrication or damage to the front wheel bearings, or it might result from excessive gear clearance in the steering mechanism. It is recommended that the owner address this issue promptly to avoid further damage. Possible causes of the vehicle's clunking noise are as follows: Sound from turn signal reset: If the turn signal is activated while steering, the noise might come from the rebound clip of the turn signal's automatic reset mechanism. The owner should verify this situation, and if confirmed, it is considered normal. Friction between plastic components: The steering wheel is typically composed of plastic parts. If the temperature drops, the plastic may harden, naturally leading to friction sounds. Abnormal noise from the steering wheel: If the noise originates from within the steering wheel, the issue is likely due to the clock spring (spiral cable) inside. Remove the steering wheel's clock spring, apply some grease, and check if the noise persists. If it does, replace the clock spring. Aging of the steering tie rod end: If the steering tie rod end is aged, it can cause the car's steering wheel to shake and produce abnormal noises. In such cases, the steering tie rod end usually needs replacement, followed by a four-wheel alignment.
16
1
Share

Does the Nissan Sylphy Classic meet China VI emission standards?

The Nissan Sylphy Classic does meet China VI emission standards. The engine of the 2019 Nissan Sylphy Classic complies with the China VI emission standard. The 2019 Nissan Sylphy Classic is a compact car with the following dimensions: length 4631mm, width 1760mm, height 1503mm, wheelbase 2700mm, fuel tank capacity 50 liters, and curb weight 1188kg. The 2019 Nissan Sylphy Classic features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.6L naturally aspirated engine that delivers a maximum horsepower of 126PS, maximum power of 93kW, and maximum torque of 168Nm, paired with a 5-speed manual transmission.
7
0
Share

How to Turn Off the Engine Start-Stop System?

To turn off the engine start-stop system, simply press the automatic start-stop switch. The functions of the automatic start-stop system are: 1. The engine can automatically shut off, reducing fuel consumption and emissions; 2. After the engine shuts off, the power supply can replace the belt pulley to provide operating power for the engine cooling fan and the in-car air conditioning. Precautions for the automatic start-stop system include: 1. Quickly shift to P gear and release the brake when the engine shuts off; 2. Reduce current consumption; 3. Do not repeatedly press the brake when the engine is off; 4. Let the engine speed drop to zero, engage the starter gear, and then restart; 5. Do not activate the automatic start-stop system during low-speed parking or when the air conditioning is on.
15
5
Share

What causes jerking when a car suddenly accelerates?

The reasons for jerking when a car suddenly accelerates are as follows: 1. Fuel quality issues: Using gasoline with a lower octane rating. Insufficient octane number in gasoline can lead to weak acceleration, resulting in decreased engine power and increased fuel consumption. 2. Engine oil quality: Insufficient oil pressure or poor sealing. Poor-quality engine oil can also cause insufficient engine power, reduced fluidity, and increased driving resistance. 3. Blockages: Components such as the air filter or throttle valve are clogged or malfunctioning. This leads to insufficient air intake, causing weak acceleration, slow speed increase, and a jerking sensation. 4. Ignition system problems: If the spark plugs are severely carbonized and ignition is poor, it can also affect engine acceleration.
4
3
Share

What are the ignition methods for gasoline engines?

Here are the ignition methods for gasoline engines: Motorcycles: Single-cylinder capacitor discharge ignition system controlled by thyristor. Some automobiles: High-voltage mechanical rotating distributor ignition system, which is being phased out due to high wear and requiring maintenance. Computer-controlled dual-cylinder simultaneous ignition method: Only used for even-numbered cylinder engines, where a pair of cylinders reaching top dead center simultaneously spark. One uses positive high-voltage ignition, while the other uses negative high-voltage ignition. One cylinder is at compression top dead center, while the other is at exhaust top dead center. The cylinder with higher compression pressure receives higher voltage (80%), while the one with lower exhaust pressure receives lower voltage (20%).
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.