What does the car maintenance three-piece set include?

2 Answers
SanAdalynn
07/29/25 1:45pm
Car three-piece set includes 2 front seat cushions and 1 rear seat long cushion. Below is the extended information for this part: 1. In addition to the three-piece set, car seat cushions also come in five-piece sets, eight-piece sets, and nine-piece sets: the five-piece set adds 2 front seat backrests to the three-piece set; the eight-piece set adds 3 rear seat backrests to the five-piece set; the nine-piece set refers to 2 front seat cushions, 2 front headrests, 2 lumbar pillows, 1 rear long seat cushion, and 2 backrests. 2. The car three-piece set is an indispensable item for seat maintenance. Choosing a car three-piece set focuses on aesthetics and protection, which can avoid dirtying the seats during driving, reduce wear and tear on car seats, thereby extending the service life of the seats, and making driving more comfortable.
Was this review help?
13
5
Share
LeClayton
08/14/25 4:57am
Maintaining my car has been a routine for me over decades of driving. The 'maintenance trio' primarily refers to engine oil, oil filter, and air filter. I always insist on changing them regularly to ensure clean engine lubrication and prevent wear; the air filter keeps the intake clean, otherwise dust clogging can reduce power and increase fuel consumption. I still remember last year when I delayed an oil change, the engine noise increased significantly and nearly caused a breakdown. Since then, I make sure to change it every six months or 10,000 kilometers. When choosing engine oil, pay attention to quality and viscosity; fully synthetic oil, though more expensive, lasts longer and protects the engine better. Don’t skimp on filters—choose reputable brands. Learning to inspect them yourself and going to professional shops regularly keeps the car reliable and durable, saving money and hassle in the long run while extending its lifespan.
Was this review help?
2
4
Share
Expand All
More Forum Discussions

How to solve the simultaneous illumination of ABS and airbag lights in the Ford Escort?

It is recommended to go to a 4S shop or repair shop to check if the gap between the copper pieces of the front wheel sensor plug is too large or if the cable is disconnected. Then clear the ABS and airbag light fault codes, and the issue should be resolved. Below is relevant information: 1. ABS: ABS (Anti-lock Braking System) is an anti-lock braking system; it sends signals through sensors installed on the wheels indicating that the wheels are about to lock up. The controller then instructs the regulator to reduce the oil pressure in the wheel's brake cylinder, decreasing the braking torque. After a certain period, the original oil pressure is restored, and this cycle repeats continuously (up to 5~10 times per second), keeping the wheels in a rotating state while maintaining maximum braking torque. 2. Airbag: Airbag (Air-bag, or Supplementary Restraint System, abbreviation: SRS); refers to an inflatable soft bag installed in the car, which is deployed instantly in the event of a collision to provide cushioning and protect the safety of the driver and passengers. Generally, in the event of a collision, it can prevent the heads and bodies of the occupants from directly hitting the interior of the vehicle, reducing the severity of injuries.
15
0
Share

How many days after a new car leaves the factory is the certificate of conformity uploaded?

New cars upload the certificate of conformity 7 days after leaving the factory. The certificate of conformity is issued simultaneously with the vehicle, but the information must be uploaded to the National Development and Reform Commission (NDRC), which then saves it into the database for the vehicle management office to access. This process typically takes around one and a half weeks. Vehicle Certificate of Conformity: The vehicle certificate of conformity is issued with the vehicle when it leaves the factory. It must be submitted to the vehicle management office for archiving when registering the vehicle's license plate, and it is replaced by the motor vehicle registration certificate. Engine Number: The vehicle dealer will check with the vehicle management office during the settlement process. There is an engine number that can be compared to verify if it matches the engine number recorded at the time of production and the one on the vehicle's registration certificate. The vehicle management office where the car is registered will also have a rubbing of the engine number from the time of registration. Vehicle Management Office Website: You can check the certificate of conformity number of the vehicle on the vehicle management office's website.
9
4
Share

How many years after purchasing a new car does it require an annual inspection?

If the new car is a small or micro non-commercial passenger vehicle, it requires an annual inspection after exceeding 6 years. Introduction to Annual Inspection: Motor vehicle inspection includes three categories: motor vehicle safety technical inspection, motor vehicle emission inspection, and comprehensive vehicle performance inspection. Annual inspection, also known as annual check-up, refers to the safety inspection conducted every year or every two years on a vehicle. This includes a comprehensive check of components such as the horn, brakes, axle weight, chassis, ignition system, lighting system, exhaust system, license plate installation, etc. Annual Inspection Process: Upon arrival at the inspection station, the first step is the exterior inspection. The owner needs to park the vehicle in the designated area for exterior inspection, prepare the fire extinguisher and triangular warning sign, open the vehicle's engine hood and trunk, and wait for the staff to conduct the inspection. After payment, the owner must submit their ID card and vehicle license to the staff, who will then enter the vehicle's annual inspection information into the system. Once these steps are completed, the owner can take the form and wait for the online inspection. If the online inspection is passed, the owner can proceed to the final procedures at the general inspection office.
10
3
Share

Why Are There Holes in the Engine Hood?

The reason there are holes in the engine hood is for heat dissipation. Some are due to high compression ratio boosting. You can open the engine hood to check what's underneath—if it's an intake partition, then it's for boosting; if it's an intercooler, then it's for heat dissipation. Airflow Guidance Function: For objects moving at high speed in the air, the air resistance and turbulence generated around the moving object directly affect its trajectory and speed. The shape of the engine hood can effectively adjust the direction of airflow relative to the car's movement and the resistance it generates, reducing the impact of airflow on the car. Through guidance, air resistance can be decomposed into beneficial forces, increasing the force of the front tires on the ground, which helps stabilize the car's movement. Protection for the Engine and Surrounding Pipeline Components: Under the engine hood are critical components of the car, including the engine, electrical circuits, oil circuits, braking system, and transmission system. These are vital to the vehicle. By enhancing the strength and structure of the engine hood, it can effectively prevent adverse effects such as impacts, corrosion, rain, and electrical interference, ensuring the normal operation of the vehicle.
3
2
Share

What is the engine speed of a motorcycle?

Motorcycle engine idle speed is 1400 (±100) RPM. Most domestic motorcycles have a maximum speed between 7,000 and 9,000 RPM. Some domestic motorcycles can reach up to 11,000 RPM. Tachometer working principle: Electronic tachometers utilize electromagnetic principles: a piece of iron is connected to the needle, surrounded by an electromagnetic coil. The electromagnet has three wires: positive, negative, and the high-voltage pack input wire, which is the engine's ignition wire. Each time this wire discharges, the engine ignites once, meaning the engine rotates twice. Based on this principle, every time the electromagnet is energized, it magnetizes once. The faster the rotation, the stronger the magnetic force, causing the needle to move upward. Mechanical tachometer: Mechanical tachometers use a flexible steel wire connected at one end to the engine and the other end to the instrument panel. The engine's power drives the rotation of the flexible wire. Inside, there is a circular magnet with a bowl-shaped iron disk attached to it, and the needle is mounted on the disk. The faster the rotation, the quicker the magnetic force moves the iron bowl. The principle of the mechanical tachometer is the same as that of the odometer on the left.
4
4
Share

Can someone else handle the driver's license renewal for me?

Driver's license renewal can be handled by someone else. The process and required documents are as follows: 1. Prepare two 1-inch photos and a medical certificate, with one photo attached to the top right corner of the medical form and the other kept for the new license. 2. Bring your ID card and driver's license to the service hall, fill out the "Renewal Application Form," then submit the documents, medical certificate, and application form to the staff, pay a 10-yuan fee, and wait for the new license to be issued. 3. Before renewal, check if there are any unresolved traffic violations. If so, they must be handled first; otherwise, renewal will not be processed. 4. Renewal can be done up to 90 days in advance. Plan your time wisely to avoid expiration. If your license expires and you are caught by traffic police, you will be fined 50 yuan without any points deducted. 5. It is best to take the renewal photos and medical certificate directly at the police station's service hall, where the fee is 10 yuan for both. Otherwise, there is a risk of disqualification, requiring retakes and delaying the process. Renewal is usually completed on-site, but in some large cities, it may take a few days, though it must be completed within 15 days, after which you will be notified to collect your new driver's license.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.