What does the car individual mode mean?

What is the displacement of the Besturn B50?

Besturn B50 has a displacement of 1.6L. Definition of displacement: A specialized term in hydraulic transmission, referring to the volume of fluid inhaled or discharged per stroke or cycle. The displacement of a car is an important parameter for measuring a vehicle. Some domestic cars do not have the vehicle model marked as above on their rear, but the displacement is usually indicated on the body or rear of the car. Differences in displacement size: Generally, the larger the displacement, the greater the output power, simply put, the more "powerful" the car is, but relatively, the fuel consumption will be higher. Typically, off-road vehicles and sports cars have higher displacements; while cars with smaller displacements are more "moderate" in terms of power performance, but offer better economic applicability. The classification of vehicles is also determined by the size of their displacement. Generally, mini cars have a displacement of less than or equal to 1.0L; compact cars have a displacement in the range of 1.0—1.6L; midsize cars have a displacement in the range of 1.6—2.5L; executive cars have a displacement in the range of 2.5—4.0L; and luxury cars have a displacement greater than 4.0L.

14

4

Share

What is the 120 km/h speed alarm in the Emgrand X6?

The 120 km/h speed alarm in the Emgrand X6 is a speed warning system installed in the speedometer or onboard computer to ensure driving safety. When the vehicle's speed reaches or exceeds the set speed, the car will emit an audible warning to alert the driver that the current speed has surpassed the preset limit. The driver should then ease off the accelerator and reduce the speed to an appropriate range. If driving at a normal speed without exceeding the limit or accidentally activating the speed control system's related switch, the alarm speed limit can be set or adjusted in the 'Speed Alarm' interface of the onboard computer. The Emgrand X6 is a compact SUV under Geely Auto, with dimensions of 4546mm in length, 1834mm in width, 1715mm in height, and a wheelbase of 2661mm.

3

5

Share

How to operate the sunroof of the BMW X3?

The sunroof switch button of the BMW X3 is located at the front of the panoramic sunroof, and the sunroof can be opened by operating the button. The width of the BMW X3's sunroof is 760mm, the length is 1030mm, and the opening length is 330mm. The car sunroof is installed on the roof, which can effectively circulate the air inside the car and increase the intake of fresh air. At the same time, the car sunroof can also provide a broader view and meet the needs of mobile photography and videography. Car sunroofs can be roughly divided into: sliding-out type, built-in type, built-in flip-out type, panoramic type, and curtain type, mainly installed on commercial SUVs, sedans, and other models. The BMW X3 is a mid-size SUV with dimensions of 4717mm in length, 1891mm in width, and 1689mm in height, and a wheelbase of 2864mm.

20

0

Share

What are the advantages of automatic sensor headlights?

Automatic sensor headlights have the advantage of automatically adapting to changes in external light intensity, providing additional illumination when visibility is affected by light (such as entering tunnels or underground garages) without requiring any manual operation, thus not distracting the driver. Automatic sensor headlights, also known as automatic sensor-activated headlights, are controlled by a central intelligent control box that determines changes in light brightness through a light sensor located behind the rearview mirror, thereby controlling the automatic activation or deactivation of the width lights and low beams. The automatic headlight sensor utilizes optical principles, advanced photoelectric conversion technology, and is a microcomputer-controlled optical sensing control system.

12

1

Share

Analysis of GAC Aion's Chassis Performance

GAC Aion chassis analysis: The Aion demonstrates excellent chassis flatness. Protective plates are installed beneath the front engine compartment, at the front end of the power battery, and on both sides, effectively reducing aerodynamic drag during high-speed driving. Its powertrain consists of a permanent magnet synchronous motor paired with a single-speed transmission - the most common configuration in pure electric vehicles. Additionally, it employs an aluminum alloy subframe, achieving weight reduction while optimizing front-rear weight distribution. The transmission is wrapped with sound insulation material, which helps improve NVH performance during operation. The Aion features MacPherson strut front suspension, with ventilated brake discs and single-piston calipers in the front braking system. The rear braking system uses solid brake discs with single-piston calipers, with an electronic parking actuator located inside the caliper. The rear suspension adopts a torsion beam setup, and the overall suspension tuning delivers a premium driving feel. Chassis introduction: Refers to the automotive system composed of four parts: powertrain, running gear, steering system, and braking system. It supports and mounts the engine and other components/assemblies, forms the vehicle's overall shape, transmits engine power, and ensures normal operation. Chassis maintenance: Regularly inspect lubricants in all assemblies, replace worn brake pads promptly, perform wheel alignment for safety, and optionally apply protective coating to the chassis.

17

1

Share

Is it necessary to modify the sound insulation for the Alphard?

The Alphard can undergo sound insulation modifications. Advantages of car sound insulation: Noise reduction: Car sound insulation projects can effectively eliminate and block engine noise, vibrations, resonance between the body and doors, and friction sounds generated by road and air resistance during driving. This creates a quiet driving space and greatly improves driving comfort. Heat insulation: Sound insulation projects not only reduce noise but also effectively block the high temperatures generated by the engine, enhancing air conditioning efficiency. Body reinforcement: The sheet metal in non-critical areas such as the hood, doors, trunk, roof, and fenders is relatively thin. After installing sound insulation materials, the body becomes sturdier, improving passive safety coefficients in the event of a collision. Audio optimization: Audio systems, especially subwoofers installed in the rear, can cause trunk vibrations and reduced sound quality due to inadequate shock absorption. The car's structure may not withstand the impact of heavy bass, resulting in "squeaking" sounds. After sound insulation modifications, metal resonance in the body is eliminated, and good sound absorption is achieved, making the audio clearer, richer, and more powerful. Sources of car noise: Noise from engine operation, including fans, exhaust pipes, etc. Road noise, generally from bumps and gravel hitting the chassis. Tire noise, caused by friction and contact between the tires and the road. Wind noise and ambient noise, primarily airborne noise.

1

Share

What does the car individual mode mean?

What is the displacement of the Besturn B50?

What is the 120 km/h speed alarm in the Emgrand X6?

How to operate the sunroof of the BMW X3?

What are the advantages of automatic sensor headlights?

Analysis of GAC Aion's Chassis Performance

Is it necessary to modify the sound insulation for the Alphard?

What is the reason why the automatic transmission Bora does not move when shifting gears?

Does the Baojun 310 have automatic transmission models?

What is the BMW EKPM2 module?

How many kilometers for the first maintenance of a new Volkswagen Tharu?