What does the car A/C switch mean?

Why was the Baojun 310w discontinued?

Baojun 310 was discontinued due to extremely poor sales, reaching the end of its market lifecycle, prompting the manufacturer to cease production. The Baojun 310 is a compact hatchback launched by SAIC-GM-Wuling in 2016. Upon its release, it gained popularity for its stylish design and affordable price, but by April 2017, sales began to decline significantly. Below is an introduction to full payment and installment purchase options: 1. Full payment purchase: This involves paying the entire vehicle price upfront, taking delivery of the car without involving any vehicle mortgage issues. 2. Installment purchase: This requires paying a partial down payment, with the remaining amount financed through monthly loan repayments. For installment purchases, the vehicle registration certificate is mortgaged at the vehicle management office, with partial ownership recorded under the name of the lending bank or financial institution.

7

5

Share

Where to Install the Door Anti-Collision Strip?

Door anti-collision strips are mostly installed at the corners of doors and front/rear bumpers. Currently, there are three common types of anti-collision strips on the market: body anti-collision strips, door anti-collision strips, and rearview mirror anti-collision strips, all of which provide certain protection for the car body. After installation, the areas with anti-collision strips will protrude slightly more than other parts. The primary purpose of installing door anti-collision strips is to prevent scratches on the doors, offering some protection. They can also enhance the car's lines and dynamic appearance, serving a decorative function. Installing anti-collision strips does not fall under the category of car modification and will not affect the car's annual inspection. However, when purchasing anti-collision strips, it is advisable to choose ones that match the car's color to maintain overall harmony. Precautions for installing door anti-collision strips: Before installation, clean the installation area with a clean towel. Peel off a small amount of the adhesive tape inside the anti-collision strip, then snap the strip into place on the door or other installation areas. While pressing the strip, peel off the double-sided tape inside and align it with the door, trimming any excess. In winter, it is best to use a hairdryer to warm the area slightly.

9

3

Share

What does the wrench warning light with code 82 mean on the Buick Excelle?

When the wrench warning light with code 82 appears on the Buick Excelle, it indicates that the vehicle requires maintenance. The warning can be reset after the maintenance is performed. Below are some details about the 2019 15T Manual Elite version of the Excelle: 1. Powertrain: Equipped with a 1.3L turbocharged 3-cylinder LJI engine and a 6-speed manual transmission. 2. Dimensions: The length, width, and height are 4609mm, 1798mm, and 1486mm respectively, with a wheelbase of 2640mm. 3. Chassis: The vehicle features front-wheel drive, with a front MacPherson strut independent suspension and a rear multi-link independent suspension.

13

0

Share

What does it mean to add coolant to a car?

Adding coolant to a car refers to the situation when the coolant level is low or the coolant temperature exceeds the specified value, requiring a coolant replacement. Here is some relevant information about coolant: 1. Introduction: Coolant, whose full name should be antifreeze coolant, means a coolant with antifreeze function. Antifreeze can prevent the coolant from freezing and cracking the radiator or damaging the engine cylinder block during cold seasons when the car is parked. 2. Product Performance: Coolant consists of three parts: water, antifreeze, and additives. Depending on the antifreeze component, it can be divided into alcohol-based, glycerin-based, ethylene glycol-based, and other types of coolants. Alcohol-based coolant uses ethanol (commonly known as alcohol) as the antifreeze, which is cheap, has good fluidity, and is simple to prepare, but it has a low boiling point, is prone to evaporation loss, has an easily increased freezing point, and is flammable.

7

2

Share

Is It Necessary to Service a Car Every 5,000 Kilometers?

It is necessary to service a car every 5,000 kilometers. Car maintenance is typically based on a cycle, with the first service usually scheduled between 3 to 5 months or after driving 3,000 to 5,000 kilometers. Some vehicles may even extend this interval up to 8,000 kilometers. Daily Car Maintenance and Key Considerations: Maintenance and Replacement of Car Fluids: Antifreeze, also known as coolant, primarily serves to prevent freezing and cooling. Cars are factory-equipped with long-lasting antifreeze, which can often last over 10 years or 100,000 kilometers. Under normal circumstances, minimal maintenance is required unless sediment or flocculent appears in the antifreeze. Tire Maintenance: Underinflation or overinflation can lead to abnormal tire wear, shortening tire lifespan, increasing fuel consumption, and even raising the risk of a blowout. It is recommended to check tire pressure monthly to ensure it remains within the normal range. Additionally, inspect tread wear and consider rotating tires as needed. Replacement of Wear-and-Tear Parts: Spark plugs in the engine are considered consumable items and should be replaced every 20,000 kilometers. Other components such as brake fluid, transmission fluid, the battery, throttle body, fuel injectors, and brake pads are typically inspected during routine maintenance, with servicing performed based on their condition.

14

0

Share

What is the difference between VVT and CVT transmissions?

VVT and CVT transmissions have the following specific differences: 1. Nature: VVT refers to a technology in the engine, while CVT refers to the type of transmission. The technology used in VVT engines, namely the continuous variable valve timing technology, can continuously adjust the opening and closing time of the engine valves and the intake air volume, thereby improving engine power, optimizing the torque curve, and reducing fuel consumption. 2. Working principle: The working principle of VVT is that the crankshaft drives the camshaft through a timing belt, gear, or chain. The contour and position of the cam on the camshaft are usually optimized for a specific engine speed, which generally reduces the torque at low engine speeds and the power at high speeds. VVT technology can change according to the engine's operating conditions, improving the engine's efficiency and power. The principle of CVT is that in the CVT transmission system, traditional gears are replaced by a pair of pulleys and a steel belt. Each pulley is actually a V-shaped structure composed of two conical discs. The engine shaft is connected to the small pulley, which drives the large pulley through the steel belt. When the conical discs move inward and tighten, the steel belt is squeezed by the discs and moves outward from the center of the circle. Conversely, it moves inward toward the center of the circle. As the diameter of the disc driven by the steel belt changes, the transmission ratio also changes.

12

2

Share

What does the car A/C switch mean?

Why was the Baojun 310w discontinued?

Where to Install the Door Anti-Collision Strip?

What does the wrench warning light with code 82 mean on the Buick Excelle?

What does it mean to add coolant to a car?

Is It Necessary to Service a Car Every 5,000 Kilometers?

What is the difference between VVT and CVT transmissions?

What Are the Reasons for Loud Door Closing Sounds?

How to solve the P0848 trouble code?

Where is the hood switch for the Volvo S60?

Will Storing Alcohol in the Car Trunk Have Any Impact?