What does the car 488 mean?

Which region in Guangxi does the license plate 'Gui O' belong to?

There is no 'Gui O' license plate in the Guangxi Zhuang Autonomous Region. Below is the distribution of license plate segments and related information for the Guangxi Zhuang Autonomous Region: 1. 'Gui A' represents Nanning City, 'Gui B' represents Liuzhou City, 'Gui C' represents Guilin City, 'Gui D' represents Wuzhou City, 'Gui E' represents Beihai City, 'Gui F' represents Chongzuo City, 'Gui G' represents Laibin City, 'Gui H' represents the Guilin area, 'Gui J' represents Hezhou City, 'Gui K' represents Yulin City, 'Gui L' represents Baise City, 'Gui M' represents Hechi City, 'Gui P' represents Fangchenggang City, 'Gui R' represents Guigang City. 2. The first character of the license plate is a Chinese character: it represents the provincial-level administrative region where the vehicle is registered, which is the abbreviation of the (province, municipality directly under the central government, autonomous region), for example: Beijing is 'Jing', Shanghai is 'Hu', Hunan is 'Xiang', Chongqing is 'Yu', Zhejiang is 'Zhe', and so on. 3. The second character of the license plate is an English letter: it represents the prefecture-level administrative region where the vehicle is registered, which is the letter code for each (prefecture-level city, region, autonomous prefecture, league). Generally, the ranking is divided by the provincial vehicle management office based on the status of each prefecture-level administrative region (the letter 'A' is the code for the capital, the capital city, or the central urban area of a municipality directly under the central government, and the subsequent letters are not ranked in any particular order). When arranging the English letter codes for prefecture-level administrative regions, the letters 'I' and 'O' are not used (because the letters 'I' and 'O' are very similar to the numbers '1' and '0'). 'O' is often used for police cars or government units.

14

3

Share

How to Apply for an International Driving Permit?

To apply for an international driving permit, you first need to have your driver's license notarized at a local notary office, then translate it into English, and finally apply at the local police station. The following materials are required for the application: 1. A valid identity document such as a passport or travel permit, along with two copies. 2. A valid driver's license and two copies. 3. The "Driver's License Application Form," which can be downloaded and filled out in advance from the website. 4. Two recent one-inch frontal photos with a plain background and no hats or similar items on the head. 5. The "International Driving Permit Application Form." Residents of China's Hong Kong, Macau, and Taiwan regions can apply for an international driving permit, while mainland Chinese residents cannot because China has not joined the "United Nations Road Traffic Convention." Mainland residents can only apply for an English translation of their Chinese driver's license.

18

4

Share

What to Do When the Car Indicates Low Battery Voltage?

When the car battery voltage is too low, it is advisable to charge it as soon as possible using a portable charger. For a 12V 80Ah battery, the charging method is as follows: Use constant voltage with current limiting for charging. Charge at a constant voltage of 14.8V with a current limit of 20A for 16 hours, followed by a constant current of 4A for 4 hours, totaling 20 hours. Whether the battery is fully charged can be determined by the following phenomena: 1. A large number of bubbles are generated inside the battery, indicating a "boiling" phenomenon. 2. The voltage rises to its maximum value and does not increase further for two hours. 3. The electrolyte level rises to its highest point and does not increase further for two hours. 4. Observe the battery indicator eye; a green color indicates a fully charged state.

10

5

Share

How to Replace the Battery in a Civic Key?

Detailed steps for replacing the battery in a Civic key: 1. Remove the mechanical key. 2. Carefully pry open the edge with a coin to detach the upper half, wrapping the coin in a cloth to avoid scratching the smart key remote. 3. Ensure the battery's positive and negative terminals are correctly installed. The 10th-generation Civic smart key remote uses a CR2032 coin cell battery. When the battery is low or depleted, it needs replacement for normal operation. Below are relevant details about car keys: 1. The key contains delicate electronic components. Follow these precautions to prevent damage: Do not leave the key in direct sunlight, high temperatures, or highly humid environments. Avoid dropping the key or placing heavy objects on it. Keep the key away from liquids. Do not disassemble the key unless replacing the battery. Damaging the internal circuits may prevent engine start-up and disable the remote transmitter. 2. In daily use, certain actions can easily damage car keys, such as dropping them from a height. The internal circuitry has weak impact resistance and can be easily damaged by severe collisions. Another common issue is water damage; if liquid seeps inside and shorts the circuits, it can cause remote failure.

4

5

Share

Do You Need to Press the Brake When Shifting Gears in an Automatic Car?

In most cases, pressing the brake is not required when shifting gears. Here are the situations where you need to press the brake: 1. When starting the car in P (Park) gear, you must press the brake in this situation. Because the car has just started, not pressing the brake can easily cause the car to roll. 2. When driving in neutral (N) gear, you should press the brake. In fact, experienced drivers do not recommend shifting into neutral while driving. But if you really need to shift into neutral, remember to press the brake to avoid emergencies that cannot be resolved. 3. Shifting from N (Neutral) gear to D (Drive) or R (Reverse) gear also requires pressing the brake. If you don't press the brake, the car may surge forward or stop abruptly, which can cause significant damage to the transmission system.

13

5

Share

What is the displacement of the Fengon ix7?

The displacement of the Fengon ix7 is 2.0 liters. More details about the Fengon ix7 are as follows: 1. The Fengon ix7 is a mid-size SUV under the Dongfeng brand. 2. The dimensions of the Fengon ix7 are 4930 mm in length, 1935 mm in width, and 1765 mm in height, with a wheelbase of 2810 mm. 3. The 2.0-liter turbocharged engine of the Fengon ix7, codenamed HD20, delivers a maximum power of 170 kW and a maximum torque of 355 Nm. The maximum torque is achieved between 1800 and 4000 rpm, while the maximum power is reached at 5500 rpm. It features direct fuel injection technology and an aluminum alloy cylinder head. This engine is paired with a 6-speed automatic transmission (6AT). 4. The Fengon ix7 is available in both front-wheel-drive (FWD) and all-wheel-drive (AWD) versions. The AWD models are equipped with an on-demand four-wheel-drive system. 5. The Fengon ix7 uses a MacPherson independent suspension at the front and a multi-link independent suspension at the rear. The multi-link suspension is a more complex suspension structure.

3

2

Share

What does the car 488 mean?

Which region in Guangxi does the license plate 'Gui O' belong to?

How to Apply for an International Driving Permit?

What to Do When the Car Indicates Low Battery Voltage?

How to Replace the Battery in a Civic Key?

Do You Need to Press the Brake When Shifting Gears in an Automatic Car?

What is the displacement of the Fengon ix7?

How is the Approved Load Capacity Calculated?

Does installing rain guards on a car cause significant wind noise at high speeds?

How to Clean the Throttle Body Properly?

What engine does the Porsche 918 use?