What does the C1 driver's license physical examination include?

2 Answers
ChloeLynn
07/24/25 5:10am
The C1 driver's license physical examination includes the following items: 1. Vision - uncorrected or corrected visual acuity of both eyes must reach 4.9 or above on the logarithmic visual acuity chart; 2. Color discrimination - no red-green color blindness; 3. Hearing - ability to distinguish the direction of sound sources with each ear 50 cm away from a tuning fork (applicants with hearing impairments who can meet this requirement by wearing hearing aids may apply for a motor vehicle driver's license for small cars or small automatic transmission vehicles); 4. Upper limbs - both thumbs must be healthy, and each hand must have at least three other healthy fingers with normal limb and finger movement functions; 5. Lower limbs - normal movement function with a length difference between lower limbs not exceeding 5 cm; 6. Trunk and neck - no movement dysfunction.
Was this review help?
16
3
Share
Andrew
08/11/25 12:46am
I just got my C1 driver's license last month, and the physical examination was actually quite simple. First, they test your vision - as long as you can see the 4.9 line with glasses correction, you pass. The color blindness test involves recognizing number patterns; those who can't distinguish traffic lights will definitely fail. For hearing, they use a tuning fork near your ear to check if you can identify the sound direction. The hand examination was the most interesting part - the doctor bends each finger to count them one by one. Your thumb must be intact, and at least three other fingers need normal movement. The leg test just requires doing two simple squats to check normal bending ability. Finally, they ask if you have any history of sudden fainting. The whole process takes about twenty minutes and costs less than 100 yuan.
Was this review help?
6
5
Share
Expand All
More Forum Discussions

How to Fasten Seat Belts in a Sedan?

The method to fasten seat belts in a sedan is: the shoulder strap should cross the chest cavity, the waist belt should fit snugly against the hip bones, and the buckle should be securely fastened. The working principle of seat belts is: in the event of a vehicle collision or when emergency braking is applied, the pre-tensioning device will instantly retract, tightening the slack in the seat belt and firmly securing the occupant to the seat to prevent secondary collisions. The steps to replace a seat belt are: 1. Locate the wiring under the car seat and find the sensor wire for the seat belt buckle; 2. Remove the seat cushion, take out the airbag, locate the bolts securing the seat belt, and remove the seat belt buckle; 3. Find the seat cushion sensor inside the seat cushion and remove it; 4. Install the new seat belt buckle onto the seat and insert the bolts; 5. Install the weight sensor onto the car seat, then install the new retractor and tighten it with a wrench; 6. Restore the car seat cushion to its original position and neatly arrange the wiring at the bottom of the seat.
5
0
Share

What are the differences between China 5 and China 6 emission standards?

The differences between China 5 and China 6 emission standards are as follows: Different emission standards: China 6 emission standards are more than 30% stricter than China 5. Excluding the influence of working conditions and testing, gasoline vehicles' carbon monoxide emissions are reduced by 50%, total hydrocarbons and non-methane hydrocarbons emissions are reduced by 50%, and nitrogen oxide emissions are reduced by 42%. Different implementation times: The China 5 standard was implemented nationwide on January 1, 2017, as the fifth phase of national motor vehicle emission standards. China 6 was implemented from July 1, 2019. Different principles: In the China 5 phase, diesel and gasoline vehicles had different emission standards, but China 6 adopts a fuel-neutral principle, meaning that regardless of the fuel type, the emission limits are the same. Different issuing departments: The China 5 standard was issued by the Ministry of Environmental Protection; the China 6 standard was issued by the Ministry of Environmental Protection and the General Administration of Quality Supervision, Inspection, and Quarantine. Different letter representations: China 5 is represented by 'V'; China 6 is represented by 'VI'. Different monitoring requirements for plug-in hybrid electric vehicles: Compared to China 5, China 6 has improved monitoring requirements for plug-in hybrid electric vehicles, including energy storage systems, thermal management systems, brake regeneration, drive motors, generators, and other regulatory aspects. China 5 standard limits are as follows: Gasoline vehicles must not emit more than 1000 milligrams of carbon monoxide per kilometer driven. Gasoline vehicles must not emit more than 68 milligrams of non-methane hydrocarbons per kilometer driven. Gasoline vehicles must not emit more than 60 milligrams of nitrogen oxides per kilometer driven. Gasoline vehicles must not emit more than 4.5 milligrams of PM fine particles per kilometer driven. China 6 has two standards: China 6a and China 6b, as follows: China 6a standard limits: Gasoline vehicles must not emit more than 700 milligrams of carbon monoxide per kilometer driven. Gasoline vehicles must not emit more than 68 milligrams of non-methane hydrocarbons per kilometer driven. Gasoline vehicles must not emit more than 60 milligrams of nitrogen oxides per kilometer driven. Gasoline vehicles must not emit more than 4.5 milligrams of PM fine particles per kilometer driven. China 6b standard limits: Gasoline vehicles must not emit more than 500 milligrams of carbon monoxide per kilometer driven. Gasoline vehicles must not emit more than 35 milligrams of non-methane hydrocarbons per kilometer driven. Gasoline vehicles must not emit more than 35 milligrams of nitrogen oxides per kilometer driven. Gasoline vehicles must not emit more than 3 milligrams of PM fine particles per kilometer driven. Affected by the China 6 emission policy, although China 5 vehicles are not currently restricted in normal use, without traffic or license plate restrictions, their resale value will be significantly impacted. For car owners, if they purchase a truck for hauling goods with a loan, after paying off the loan, the vehicle's depreciation is equivalent to the net profit earned by the owner during that period. A higher residual value means more profit for the owner. Therefore, from this perspective, China 6 vehicles, with longer service life and more road rights, have more advantages.
2
5
Share

How Many Tires Should Snow Chains Be Installed On?

Snow chains should be installed on all 4 tires. The installation method is as follows: 1. Lay the snow chain flat and centered in front of the tire; 2. Drive the car forward half the length of the snow chain so that the tire's contact point is in the middle of the snow chain; 3. Fasten the hooks on the inner side of the tire and then the hooks on the outer side of the tire; 4. Continue moving the car forward to adjust the connection point where force is applied during installation, then secure the snow chains on the tires. The functions of tires include: 1. Supporting the vehicle's weight and bearing the car's load; 2. Transmitting traction and braking torque to ensure adhesion between the wheels and the road surface; 3. Reducing and absorbing vibrations and impact forces during driving to ensure safety, handling stability, comfort, and fuel efficiency.
4
3
Share

What is the difference between 10w40 and 5w40 engine oil?

The difference between 10w40 and 5w40 engine oil lies in the low temperatures they can withstand: 10w40 engine oil can withstand a low temperature of minus 25 degrees Celsius, while 5w40 engine oil can withstand a low temperature of minus 30 degrees Celsius. The functions of engine oil are: 1. To alleviate friction and high temperatures; 2. To cool and lower temperatures; 3. To clean and remove impurities; 4. To absorb shocks and cushion impacts; 5. To prevent rust and corrosion. The method for changing engine oil is: 1. Lift the car, remove the protective plate, and place a container of about 10 liters under the oil drain plug; 2. Unscrew the oil drain plug, use an air gun to blow for two minutes at the oil filler port, tighten the oil drain plug after draining, and wipe it with a tissue to check for oil leaks; 3. Reinstall the protective plate, lower the car, and use a funnel to add engine oil through the filler port.
1
0
Share

How much engine oil does the Hongqi H5 require?

The Hongqi H5 requires 5 liters of engine oil. The functions of engine oil include lubrication, auxiliary cooling, cleaning, sealing and leak prevention, rust and corrosion protection, shock absorption, and anti-wear. Taking the 2020 Hongqi H5 as an example, it is a mid-size car with body dimensions of 4945mm in length, 1845mm in width, 1470mm in height, a wheelbase of 2875mm, and a fuel tank capacity of 58 liters. The 2020 Hongqi H5 is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 169PS, a maximum torque of 258Nm, and a maximum power of 124kW, paired with a 7-speed dual-clutch transmission.
9
5
Share

What is the difference between imported and joint-venture cars?

Imported and joint-venture cars differ mainly in their place of production: Imported cars are entirely manufactured abroad and then enter the market through import channels; joint-venture cars utilize foreign technology and brands, with the entire vehicle or some parts imported from abroad and then produced or assembled domestically. Examples of imported car models include the Mercedes-Benz S600, BMW 720, BMW 740, Porsche Cayenne, BMW A8, BMW A6, Bugatti Veyron, Porsche 911, Rolls-Royce Phantom, etc. Joint-venture car models include the Volkswagen Bora, FAW Mazda X3, Volkswagen Lavida, Magotan, Toyota Camry, Tayron, etc.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.