What Does the BYD Song Maintenance Manual Include?

1 Answers
DanielLynn
07/29/25 6:44am
BYD Song maintenance manual includes the following details: Engine Oil: Engine oil, also known as lubricating oil, serves to lubricate, cool, dampen vibrations, and reduce wear in the engine. Full synthetic oil typically requires replacement every 10,000–12,000 kilometers. Semi-synthetic oil should be replaced every 8,000–10,000 kilometers, while mineral oil generally needs replacement every 5,000 kilometers. Three Filters: The oil filter, air filter, and cabin air filter are collectively referred to as the three filters of a car. They should be replaced every 20,000 kilometers or every 2 years. Coolant: Coolant, also known as antifreeze, primarily prevents freezing in winter, boiling in summer, and the formation of scale and corrosion. Generally, coolant should be replaced every 4 years or 60,000 kilometers. Brake Fluid: Brake fluid (hydraulic fluid) is highly hygroscopic and will absorb moisture from the air automatically. It should be replaced every 40,000 kilometers.
Was this review help?
7
1
Share
More Forum Discussions

Why is there no air coming out of the two middle vents of the car air conditioner?

The reasons why the car air conditioner is not blowing air are as follows: 1. Check whether the air outlet switch is properly connected and whether there is a short circuit; 2. Check the fuse of the air conditioner to see if it has burned out; 3. Check whether the air outlet of the air conditioner is blocked; 4. Check whether the air conditioner motor fan is working normally; 5. Check the power distribution of the whole vehicle and inspect the battery. More related information is as follows: 1. The car air conditioner is used to adjust and control the temperature, humidity, air cleanliness, and air flow in the car compartment to the optimal state, providing a comfortable riding environment for passengers and reducing travel fatigue; it creates good working conditions for the driver and plays an important role in ensuring safe driving. 2. All car air conditioner vents have a wind direction switch, which is connected to the air duct conversion mechanism. Check whether this switch is set to the middle air outlet position. If not, it is necessary to disassemble the fan under the instrument panel for repair. It is recommended to go to a repair shop for inspection.
10
4
Share

What causes the buzzing sound when stepping on the accelerator in MG6?

MG6 stepping on the accelerator with a buzzing sound may be due to the fuel pump or related components, or a faulty clutch release bearing. Causes of car abnormal noises: It is necessary to check whether there is air leakage in the engine's intake pipe, whether the air filter is installed properly, identify the source of the sound, and whether the engine belt is aging, loose, or slipping. The buzzing sound depends on where it occurs. On the right side of the engine, it is generally the generator belt; on the left, it is an issue with the throttle atmosphere. For the front wheel brake pads, the main reason is likely the brake caliper, with a small part being due to jamming. Solutions for accelerator abnormal noise: You can check the engine oil yourself. If the oil has not been changed for a long time or has deteriorated, these can increase friction between the cylinder valves and guides, as well as hydraulic lifters, leading to abnormal noises when accelerating. When the belt slips, it also produces a buzzing sound. Once the belt slips, it causes high friction temperatures, making the belt stretch longer, which worsens the slipping.
19
1
Share

What is the button under the door of the Audi A4?

The button under the door of the Audi A4 is the vehicle vibration alarm button. It activates the vehicle vibration alarm system. After locking the car, if there is someone inside or vibration on the seats, the vehicle will automatically sound an alarm. This helps prevent situations where children are left inside the car without the driver's knowledge, avoiding potential dangers. To activate the vehicle vibration alarm system, the engine must be started, and the vehicle's electronic system must be engaged. Car Anti-Theft Alarm: The car anti-theft alarm is a multifunctional product. It not only serves as an anti-theft alarm but also includes features such as remote trunk opening, remote door locking/unlocking, remote window control, remote engine start, and remote engine lock. Functions of the Car Alarm: Trigger state recognition function, anti-robbery function; automated central door locking; door ajar warning; vehicle locator/emergency signal, secondary anti-theft; LED indicator, precision electronic detector; remote trunk opening; intrusion warning, power-off memory; automatic anti-theft/non-automatic anti-theft selection, door open flash/no flash selection; engine lock, external emergency deactivation.
13
0
Share

What kind of antifreeze does Volkswagen Polo use?

Volkswagen Polo can use the antifreeze purchased from the 4S store. Method for replacing antifreeze in Volkswagen Polo: Before replacement, let the vehicle stand for 30 minutes to prevent burns from the antifreeze. Locate and loosen the antifreeze drain valve at the bottom of the radiator until all the antifreeze is completely drained. Keep the car idling and continuously add clean water to the antifreeze reservoir to flush out any remaining antifreeze in the cooling system. Stop adding water when the flow becomes colorless, indicating that the old antifreeze has been mostly removed. When the water flow stops, tighten the drain valve and turn off the engine. Add new antifreeze through the filling port until the level is between the MIN and MAX marks. Function of antifreeze: Antifreeze, fully known as antifreeze coolant, is a coolant with antifreeze properties. The engine generates a lot of heat during operation and requires cooling. Antifreeze is the circulating fluid used in the engine cooling system. Therefore, antifreeze is primarily used to dissipate heat from the powertrain.
17
4
Share

What grade of gasoline should the new Regal 1.5T use?

For the new Regal 1.5T, using 92 octane gasoline is sufficient. Prolonged use of 95 octane may lead to carbon deposits, so it's essential to follow the vehicle's recommended fuel grade. Definition of 95 octane gasoline: 95 octane gasoline consists of 95% isooctane and 5% n-heptane. Even high-compression engines can use lower octane gasoline; the choice of gasoline grade should not be based solely on compression ratio but should adhere to the manufacturer's recommendations. Differences between 95 and 92 octane gasoline: The primary difference lies in the octane rating, with no other fundamental distinctions. 95 octane gasoline is composed of 5% n-heptane and 95% isooctane, while 92 octane gasoline consists of 8% n-heptane and 92% isooctane. 95 octane gasoline has a higher octane rating than 92 octane, making it more stable and easier to burn, thus delivering greater power output compared to 92 octane gasoline.
14
4
Share

What causes the buzzing sound in Audi A3 at 2000 RPM?

Audi A3 buzzing sound at 2000 RPM is mainly caused by increased carbon deposits in the throttle body. The following details the reasons and solutions: Increased carbon deposits in the throttle body: The throttle body is a controllable valve that regulates air intake into the engine, available in two types: traditional cable-operated and electronic throttle bodies. After entering the intake manifold, the air mixes with gasoline to form a combustible mixture for combustion. Connected to the air filter at the top and the engine block at the bottom, it is often referred to as the throat of the car engine. Increased carbon deposits in the throttle body absorb some gasoline when the engine is cold. When the engine warms up, this gasoline evaporates, causing an overly rich mixture at idle speed, which leads to low-speed vibrations. Corresponding solution: Release the gases. Engine oil will volatilize when heated during use. The longer the usage time and the higher the temperature, the stronger the volatilization. Additionally, some compressed gas from the cylinders will inevitably squeeze into the crankcase through the piston ring gaps. Therefore, there must be a channel to release these gases; otherwise, positive pressure will form in the oil pan.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.