What does the Buick Verano 15s mean?

1 Answers
SanTheo
07/30/25 6:25am
Buick Verano 15 represents a 1.5L naturally aspirated engine, and the S stands for a high-power direct-injection engine, which is part of Buick's new model naming convention. Here is an introduction to the Buick Verano: 1. The 2019 Buick Verano maintains the same exterior and interior design as the 2018 model, with upgrades primarily focused on configurations. 2. The new Buick Verano is equipped with two engine options: a 1.5L L4 naturally aspirated engine and a 1.5T L4 turbocharged engine. 3. The 1.5L version has a maximum horsepower of 118 PS, a maximum power of 87 kW at 6600 rpm, a maximum torque of 146 Nm at 4000 rpm, and is paired with a 6-speed automatic transmission. The official 0-100 km/h acceleration time is 12.8 seconds. The 1.5T version has a maximum horsepower of 169 PS, a maximum power of 124 kW at 5600 rpm, a maximum torque of 250 Nm between 1700-4400 rpm, and is paired with a 7-speed dual-clutch transmission. The official 0-100 km/h acceleration time is 8.8 seconds. 4. The entire lineup features a front suspension type of MacPherson independent suspension and a rear suspension type of torsion beam with Watt's linkage non-independent suspension.
Was this review help?
16
2
Share
More Forum Discussions

How Long Does It Take to Apply Window Tinting Film?

Applying window tinting film takes 3 to 5 hours. Car window tinting involves applying a thin film to the front and rear windshields, side windows, and sunroof of a vehicle. The functions of car window tinting film are: 1. Blocking heat generated by infrared rays; 2. Filtering out ultraviolet rays to protect the skin from damage; 3. Enhancing safety and explosion resistance, as the film has strong tear and puncture resistance; 4. Maintaining privacy and security; 5. Reducing air conditioning load; 6. Minimizing accidents caused by glare. The steps for applying the film are: 1. Protecting the vehicle's interior; 2. Cutting the window tinting film according to the window dimensions; 3. Cleaning and wiping the front and rear windshield glass; 4. Using a heat gun to shape the film; 5. Fine-cutting the film after the heat-shaping process is completed.
3
1
Share

What is the parking procedure for an automatic transmission vehicle?

Automatic transmission vehicle parking procedure is: 1. Press the brake pedal and shift the gear to N (Neutral); 2. Engage the handbrake, then shift to P (Park); 3. Release the brake pedal and turn the key to shut off the engine. Introduction to automatic transmission gear letters: P is Park, R is Reverse, N is Neutral, D is Drive, L is Low gear, S is Sport mode, OD is Overdrive. Precautions for driving an automatic transmission vehicle: 1. Do not shift to P while driving; 2. After driving, the engine must be turned off and shifted to P before removing the key; 3. Do not shift to N while driving to coast; 4. When starting the vehicle in P or N, move the gear lever from P while pressing the brake, turn on the power while pressing the brake, shift to N, and after ignition, shift to D to move forward directly.
11
4
Share

What does the first maintenance of a new car include?

The first maintenance of a new car includes: 1. Changing the engine oil, oil filter, and cleaning the air filter, checking whether the generator belt and wiper blades are damaged; 2. Checking whether the levels of various fluids are normal; 3. Checking whether the tire pressure is normal and whether the tires have uneven wear, bulges, or damage; 4. Inspecting the car chassis, including the brake pads, brake discs, connecting rods, ball joints, and CV joints for any scratches; 5. Checking whether all switches and lights are working properly. The benefits of maintenance include: 1. Ensuring the vehicle is in excellent performance condition; 2. Improving the vehicle's efficiency and reducing the wear of its parts and tires; 3. Enhancing driving safety; 4. Preventing potential hazards caused by vehicle problems; 5. Reducing noise and environmental pollution; 6. Keeping the vehicle's appearance clean and preventing damage.
2
5
Share

Is It Normal for the Charger to Get Hot When Charging the Battery?

It is not normal for the charger to get hot when charging the battery. Reasons for the battery getting hot during charging: Poor-quality or mismatched charger: If an incompatible or low-quality charger is used, excessive current can increase heat generation during charging, causing the battery to overheat. In this case, it is necessary to replace the charger with a high-quality one that matches the battery. Battery issues: For batteries older than two years, improper charging methods, such as overcharging, can easily lead to water loss in the battery, resulting in overheating during charging. Solutions: If the electrolyte level in the battery is insufficient, you can add an appropriate amount of distilled or purified water. If the battery overheats due to aging, short circuits, or broken plates, it is recommended to replace it with a new one.
19
1
Share

How to Adjust the Rearview Mirror of the New Jetta?

Adjustment method for the new Jetta's rearview mirror: To adjust the left mirror, rotate the button to the L position, then move it up, down, left, or right to change the angle. To adjust the right mirror, rotate the button to the R position and adjust it similarly. Once you find the desired position, rotate the button back to the middle. The Jetta is a car brand under FAW-Volkswagen, a joint venture of the German Volkswagen Group in China. In terms of body dimensions, the new Jetta measures 4501mm in length, 1704mm in width, and 1469mm in height, with a wheelbase of 2604mm. For the interior, the new Jetta follows Volkswagen's design style, featuring a larger LCD display on the dashboard, along with USB, SD card, and AUX ports. The air vents above the display have a new design.
5
1
Share

How to Change Brake Fluid?

The method for changing brake fluid is: 1. Park the vehicle on level ground and turn off the engine, then open the hood and drain the fluid from the reservoir; 2. Use a funnel to fill the reservoir with new brake fluid; 3. Use a jack to lift the vehicle and remove the tires starting from the rear wheels; 4. Remove the rubber dust cap on the brake caliper; 5. Loosen the bleeder screw with a wrench and attach a rubber tube to it, connecting it to a drain bottle; 6. Go inside the vehicle and press the brake pedal while observing the fluid drainage until the fluid level in the reservoir under the hood reaches the lower limit. The hazards of mixing different types of brake fluid include: 1. The performance indicators of the brake fluid may decline or undergo chemical reactions, reducing the braking effectiveness of the vehicle; 2. The fluid's temperature resistance may decrease, affecting driving safety.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.