What does the brake pad warning mean in Audi?

1 Answers
CharlesRose
07/29/25 8:07pm
Audi's brake pad warning indicates that the brake pads are excessively worn and should be replaced promptly. The braking system significantly impacts the overall performance of the vehicle, affecting its ability to stop safely after starting, so any issues should be taken seriously. The following details about the brake pad warning: 1. Brake pads are components installed on the cylindrical surface of the car's tires, made of friction materials. 2. If they are excessively worn, they should be replaced immediately. After the warning appears, the car can typically be driven for about 200 kilometers. 3. If the brake discs are too thin and trigger the warning, they should also be replaced to avoid affecting the vehicle's braking system and prevent potential accidents.
Was this review help?
3
3
Share
More Forum Discussions

What are some methods to prevent tire blowouts in summer?

Methods to prevent tire blowouts in summer include: 1. Maintain standard tire pressure; 2. After driving at high speed for a period of time, stop midway to allow the tires to cool down naturally; 3. Avoid sudden acceleration and braking; 4. Avoid speeding and overloading; 5. Remove stones or foreign objects from the tread grooves to prevent tire crown deformation; 6. Avoid exposure to direct sunlight; 7. Observe road conditions and avoid muddy or uneven surfaces. The functions of tires are: 1. Work together with the vehicle suspension to mitigate impacts during driving; 2. Ensure good ride comfort and smooth driving; 3. Ensure good adhesion between the wheels and the road surface.
3
0
Share

Why Do Car Brake Pads Make Noise?

Car brake pads make noise due to the following reasons: 1. Metal hard spots can cause abnormal sounds; 2. Severe wear—the warning piece will make abnormal sounds to prompt replacement; 3. The brake disc and pads are in the break-in period; 4. Foreign objects between the brake pads and disc; 5. Improper installation; 6. Poor return of the brake caliper. Brake pads, also known as brake linings, refer to the friction materials fixed on the rotating brake drum or disc of the wheel. The friction linings and blocks withstand external pressure to generate friction, thereby achieving the purpose of vehicle deceleration. Their components include: 1. Steel plate; 2. Bonded heat insulation layer; 3. Friction block.
16
1
Share

Which country's brand is Volvo Cars?

Volvo Cars is a Swedish brand. The models under Volvo include: Volvo S60, Volvo S90, Volvo V60, Volvo V90, Volvo XC40, etc. Taking the 2021 Volvo S90 as an example, its body dimensions are: length 5090mm, width 1879mm, height 1450mm, wheelbase 3061mm, minimum ground clearance 153mm, and fuel tank capacity 55l. The 2021 Volvo S90 is equipped with a 2.0t turbocharged engine, with a maximum power of 184kw and a maximum torque of 350nm, matched with an 8-speed automatic transmission.
8
1
Share

What is the difference between cars with and without a 't'?

The difference between cars with and without a 't' lies in their engine configurations: cars with a 't' are equipped with turbocharged engines, while those without a 't' have naturally aspirated engines. A car with a 't' means its engine utilizes turbocharging technology, which employs exhaust gases generated by the internal combustion engine to drive an air compressor. The turbocharger's role is to increase the engine's air intake, thereby enhancing its power and torque, resulting in stronger vehicle performance. A car without a 't' means its engine uses naturally aspirated technology, where air is drawn into the combustion chamber by atmospheric pressure without the aid of any supercharger.
9
4
Share

Does Lane Keeping Automatically Steer the Wheel?

Lane keeping assists the vehicle in maintaining its position at the center of the lane. During turns, the vehicle will gently steer to stay centered within the lane. Below is a detailed introduction to the Lane Keeping Assist System: 1. System Function: Building upon the vehicle's Lane Departure Warning System, it coordinates braking, acceleration, and steering to help the vehicle stay centered in the lane with the aid of a camera. 2. Operation Method: When the vehicle approaches road markings, the lane keeping system activates standby mode, indicated by a symbol on the dashboard. 3. Application Scope: This system is primarily used on structured roads, such as highways and well-paved roads. It becomes operational when the vehicle speed reaches 65 km/h or higher.
20
2
Share

How to Determine if the Rear Windshield is Not Heating?

Check if there are heating wires on the vehicle's rear windshield to determine. Below are the usage methods for the rear windshield heating wires: 1. Switch: The rearview mirror heating and rear defogging share the same button on the air conditioning control panel. Pressing it will activate heating, which automatically stops after approximately 15 minutes of continuous operation as a self-protection feature. 2. Usage: Once the windshield heating button is pressed, the effect is noticeable when there is fog. A rectangular symbol on the center console with three wavy arrows indicates this function. 3. Precautions: There is a rear defogging button in the air conditioning button area on the center console. Pressing it activates the rear defogging function, and the heating wires begin working.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.