What does the BMW X1 auto start-stop mean?

2 Answers
DelilahDella
07/29/25 12:05am
BMW X1 auto start-stop means that the engine can automatically shut off during traffic jams and at red lights, and then restart when moving off. Below are the specific details about the auto start-stop function: 1. Auto Start-Stop Button: The auto start-stop button is located to the left of the cigarette lighter, featuring an icon of a circle with the letter A inside and the word OFF below. Simply press the button to turn off the auto start-stop. 2. Function Purpose: The engine auto start-stop automatically shuts off the engine when the vehicle comes to a temporary stop (e.g., at a red light). When it's time to move forward again, the system automatically restarts the engine. This helps reduce unnecessary fuel consumption, lower emissions, and improve fuel economy.
Was this review help?
20
2
Share
SanWillow
08/12/25 4:22am
As someone who frequently researches cars, the BMW X1's auto start-stop function automatically shuts off the engine when you come to a stop, such as at a red light, to save fuel. It quickly restarts when you press the accelerator or release the brake. This feature relies on sensors to monitor speed and vehicle status. BMW's version is exceptionally smooth, with almost no noticeable delay. However, frequent restarts in heavy traffic might be annoying. I recommend manually turning it off during congestion. Its fuel-saving efficiency is quite high, with actual tests showing around a 10% reduction in fuel consumption. Overall, this technology is excellent, making driving more intelligent. The BMW X1's system reacts quickly with minimal restart noise, offering much greater comfort than ordinary cars, making it ideal for city commuting.
Was this review help?
5
2
Share
Expand All
More Forum Discussions

Is Secondary Ignition Harmful to the Car?

Secondary ignition after the car has started can cause significant harm to the vehicle, potentially damaging the starter gear or burning out the starter. Below are specific details regarding secondary ignition in cars: 1. Symptoms: The most obvious sign of secondary ignition is hearing an abnormal "grinding" noise from the engine area. This noise is produced by the starter gear clashing with the flywheel. The flywheel rotates at a much higher speed when the engine is running, far exceeding the starter's speed. Due to this significant speed difference, the starter's drive gear does not re-engage with the flywheel teeth during secondary ignition, thus preventing the starter from being damaged. 2. Hazards: Issues such as starter slippage, severe wear of the starter drive gear, and burnout of the starter coil are directly related to secondary ignition. Additionally, secondary ignition can also cause some wear to the teeth on the flywheel.
9
3
Share

Where is the position to turn off the headlights?

The position to turn off the headlights is located at the lower right side of the vehicle's steering wheel, which is a rotary knob that operates by turning up and down. Here is some related information: 1. Car headlights: Car headlights, also known as car front lights or car LED daytime running lights, serve as the eyes of the car. They not only relate to the external image of the car owner but are also closely linked to safe driving at night or under bad weather conditions. 2. Car lights: Car lights are divided into low beam, high beam, fog lights, warning lights, indicator lights, width lights, and reverse indicator lights. Generally, car front lights adopt a four-light system, and the main cause of failure in this four-light system car front light is usually the use of excessively high-power bulbs leading to malfunction.
15
2
Share

How to Report the Loss of a Vehicle Registered Under Your Name?

To report the loss of a vehicle registered under your name, follow these steps: The vehicle owner must submit a loss report application with proof of identity and a theft report at the corresponding window of the vehicle management office. Below is relevant information about vehicle loss reporting: 1. Method: The vehicle owner must submit a loss report application with proof of identity and a theft report at the corresponding window of the vehicle management office. The statutory loss report must be published in a provincial-level publicly circulated newspaper. 2. Required procedures: The documents needed for reissuing a vehicle registration certificate include the "Application Form for Motor Vehicle License Plates and Certificates," the original and a copy of the vehicle owner's identity proof, the motor vehicle inspection record form (processed on-site), and for reissuing the motor vehicle registration certificate, the vehicle owner must bring the vehicle to the vehicle management office.
20
5
Share

Do I need to switch from high beam to low beam when turning off the lights?

No reset is required. Here are the relevant details: 1. First test group: During the Category 3 lighting test, if the high beam is the first lighting signal in the test group, there's no need to reset it. Simply proceed to the next test group and follow the instructions. 2. Final test: If it's the last lighting signal in the test, it's recommended to switch back to low beam after completing the test. During normal testing, there's no need to deliberately check its position. If the lighting signal test begins with the high beam already activated, and the instruction requires switching to high beam, you only need to perform the action of switching to high beam.
14
3
Share

Is the Kodiaq's transmission dry or wet?

Kodiaq uses a wet transmission. The automatic transmission features oil-immersed friction plate clutches, which require the design of a hydraulic coupling or torque converter to work in conjunction with the power flexible connection clutch, making it easy to operate and with a low failure rate. Below is a detailed introduction to the Kodiaq: 1. The Kodiaq is Skoda's first domestically produced mid-size SUV based on the MQB platform. This mid-size SUV made its debut at the 2016 Guangzhou International Auto Show and received widespread attention and praise upon its appearance. The arrival of the Kodiaq broke the awkward situation where Skoda only had one compact SUV, while also providing consumers with a broader range of choices. The performance of the Kodiaq's 7-speed dual-clutch transmission is still considered one of the best in its class, with almost no jerking during low-speed driving, effectively controlling the common issues of dual-clutch transmissions. The gear shifts are crisp and decisive, with upshifts being very proactive during daily driving, keeping the engine speed mostly below 2000 rpm, ensuring better fuel economy. 2. The Kodiaq is equipped with the DQ380 7-speed dual-clutch DSG transmission, which takes into account a large amount of actual Chinese road conditions, providing smooth and jerk-free gear shifts with excellent stability, and optimizes the efficiency of low-speed gear shifting; 7 forward gears with manual and automatic modes, comprehensively upgrading the dual-clutch transmission in terms of power, driving pleasure, and fuel economy. The rapid gear shifting and continuous power improve both power performance and fuel economy; the latest transmission adopts more advanced designs, capable of withstanding a maximum torque of up to 420N·m; the wet dual-clutch form, with continuous circulation of transmission oil, cools and lubricates the dual-clutch module, ensuring more stable performance.
5
5
Share

How to Cancel the Appointment for Subject 2?

In case you have already made an appointment but are unable to attend the exam due to unforeseen circumstances, you must cancel the exam at the vehicle management office at least one day in advance. Below are some important notes regarding the Subject 2 exam: 1. Pay attention to the time: The hill start is a common area where candidates fail. Once you have applied the brakes, the outcome is already determined. Do not hesitate; start immediately. Otherwise, exceeding the 30-second limit will result in an automatic failure. It is crucial to manage the time effectively. 2. Do not turn off the engine after the exam: After completing the Subject 2 exam, there is no need to turn off the engine. Therefore, be sure to follow the instructions of the safety officer on-site after passing the exam. Once parked, shift to neutral and apply the handbrake, but do not turn off the engine.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.