What does the blue sky and white clouds logo mean?

How High Temperature Can Car Tires Withstand?

Car tires can withstand high temperatures ranging from 180 to 200 degrees Celsius, with different grades of tires having varying heat resistance levels. Typically, the tire temperature of a Class A vehicle traveling at 120 km/h approaches 100 degrees, while brake temperatures can reach 200 degrees. Under normal operating conditions, tire temperatures range between 90 to 110 degrees. Tires are equipped with insulating sleeves that generally maintain temperatures within a controllable range. Hot weather can easily cause tire deformation and reduced tensile strength. Factors such as non-standard tire pressure, aging tires, or diminished performance can lead to sudden tire blowouts. Therefore, it's advisable to check tire pressure appropriately before driving.

6

5

Share

How to Reset the Maintenance Light on a Cadillac?

Cadillac maintenance light reset operation method is: 1. Press the ignition switch to start the engine; 2. Observe the dashboard, there will be a maintenance reminder; 3. Click the set button on the multifunction steering wheel; 4. Click the cancel button on the multifunction steering wheel to complete. Cadillac models include: Cadillac CT5, Cadillac CT6, Cadillac CT4, Cadillac XT4, Cadillac XTS, etc. Taking the 2018 Cadillac XTS as an example, it belongs to the mid-to-large size car category, with body dimensions of: length 5103mm, width 1852mm, height 1502mm, wheelbase 2837mm, and a fuel tank capacity of 70L.

5

0

Share

What is the curb weight of the 1.5t Haval H6?

1.5t Haval H6 has a curb weight of 1675kg. Taking the 2021 Haval H6 as an example, its body dimensions are: length 4615mm, width 1860mm, height 1720mm, wheelbase 2680mm, and minimum ground clearance 182mm. The 2021 Haval H6 features a MacPherson independent front suspension and a double-wishbone independent rear suspension. It is equipped with a 1.5t turbocharged engine, delivering a maximum horsepower of 150ps, maximum torque of 210nm, and maximum power of 110kw, paired with a 6-speed manual transmission.

19

4

Share

What is the process for replacing an oil filter?

Process for replacing an oil filter: 1. Remove the drain plug to drain the engine oil; 2. After draining, wipe the drain plug clean, then reinstall and tighten it with a torque of 30 Nm; 3. Loosen the oil filter using an oil filter wrench; 4. Apply engine oil to the O-ring of the new oil filter; 5. Hand-tighten the new oil filter onto the oil filter bracket until the O-ring contacts the mounting surface; 6. After contact with the mounting surface, use the oil filter wrench to tighten the filter an additional three-quarters of a turn with a torque of 15 Nm. To ensure proper tightening, accurately identify the initial contact position of the filter's O-ring with the mounting surface.

17

5

Share

Solutions for Ineffective Windshield Cleaning in Cars

Here are the methods for cleaning the windshield: 1. Surface dust: Wipe with a dry cloth, but avoid using excessive force to prevent scratching the glass. Then clean directly with windshield washer fluid, and finally wipe with a warm, damp cloth. 2. Spots: If spots on the car glass cannot be wiped off, apply a small amount of toothpaste for cleaning. 3. Cleaners: Avoid using abrasive cleaners on the vehicle's glass as such damage can impair the driver's visibility. 4. Glass rust: Glass rust is relatively difficult to remove. If laundry detergent and dish soap are ineffective, first wipe the glass with a damp cloth, then use a clean damp cloth dipped in a little alcohol or liquor to scrub the car glass vigorously. This can restore the glass to a shiny, like-new condition.

2

Share

What Are the Reasons Why a Car Charger Fails to Charge?

There are several reasons why a car charger may fail to charge, including unstable voltage, poor contact at the connection points, and low-quality chargers. Below is a detailed explanation: 1. Unstable Voltage: When charging starts, mobile phones or other smart electronic devices usually activate charging monitoring and detection programs. If these programs detect unstable voltage from the car charger, they may prohibit charging, leading to a failure to charge. 2. Poor Contact at Connection Points: Some car chargers have poorly designed connection points, which may result in poor contact during driving, causing charging failure. 3. Low-Quality Chargers: Using counterfeit or substandard products can not only prevent charging but also damage the car's fuse and digital devices, and even pose a safety risk.

11

2

Share

What does the blue sky and white clouds logo mean?

How High Temperature Can Car Tires Withstand?

How to Reset the Maintenance Light on a Cadillac?

What is the curb weight of the 1.5t Haval H6?

What is the process for replacing an oil filter?

Solutions for Ineffective Windshield Cleaning in Cars

What Are the Reasons Why a Car Charger Fails to Charge?

Should the LaCrosse 2.4 use 92 or 95 octane gasoline?

At what tread depth in millimeters should tires be replaced?

Where to Process the Conversion from Hu C to Hu License Plate?

What are the methods for testing car leakage?