What does the blue color on the car's water temperature gauge mean?

1 Answers
Paisley
07/24/25 9:56pm
Car's water temperature gauge showing blue indicates that the water temperature is low. Generally, cars use mechanical indicator gauges for water temperature. When the pointer is in the blue zone, it means the car's water temperature is low; when it's in the red zone, it indicates the water temperature is high. The normal operating water temperature for a car is 90 degrees Celsius. Low water temperature is usually caused by a cold start. After driving for a while or idling for some time, the car's water temperature will rise. If the water temperature exceeds 90 degrees, it indicates overheating, and the car should not be driven further. Prolonged driving with excessively low water temperature prevents the engine from reaching its optimal operating temperature, leading to poor lubrication and significant wear on engine components.
Was this review help?
8
0
Share
More Forum Discussions

How to Control the Steering Wheel of a Car?

Methods for controlling the steering wheel of a car are as follows: 1. After getting into the car, align your body with the steering wheel and maintain an upright posture. Lean your back lightly against the backrest of the seat. Adjust the seat forward or backward to a comfortable position based on your height. For vehicles equipped with seat belts, fasten the seat belt as required. 2. Keep your eyes level and look straight ahead. Gently hold the upper left part of the steering wheel with your left hand and the lower right part with your right hand, with both elbows relaxed and naturally hanging down. The thumbs of both hands should naturally extend and rest on the upper edge of the steering wheel, while the other four fingers should lightly grip from the outside inward. 3. Place your left foot below the clutch pedal and your right foot lightly on the accelerator pedal, about two-thirds of the way down. 4. Maintain a relaxed and comfortable driving state with a good driving posture.
14
5
Share

How to Remove the Navigation System of Changan Honor

The following is the removal method for the Changan Honor navigation system: Remove the panel covering the navigation system to expose the screws securing it. Then, unscrew and take out the navigation system, and unplug the connectors to complete the removal. The following is the installation method for the Changan Honor navigation system: 1. Before installing the navigation system, first install the GPS antenna. Place the antenna inside the dashboard from the co-driver's side, then position the GPS antenna vertically and place it at the far right of the dashboard. 2. Take out the navigation system, connect it according to the original wiring method, and secure the long wires with tape to prevent noise caused by wire collision during driving. 3. Finally, screw the screws back on, snap the interior panel into place, and the installation is complete.
20
0
Share

What kind of vehicle is the Benelli 302s?

Benelli 302s is a mid-weight new street motorcycle sharing the same engine platform as the Benelli Tornado 302, produced under the Italian brand Benelli. Below are the detailed specifications: Brand Introduction: Benelli is one of the oldest motorcycle manufacturers in Italy and the world. Established in 1911, the company has weathered numerous challenges, continuing production even through wars and economic depressions. Body Configuration: The Benelli Street 302s measures 2130mm in length, 800mm in width, and 1120mm in height, with a wheelbase of 1410mm and a seat height of 795mm, making it suitable for most domestic riders. With a minimum ground clearance of 175mm, its body design is highly suitable for urban street riding. It comes with a 16-liter fuel tank, fully meeting daily needs. The braking system features a large 260mm dual-disc wave rotor with four-piston calipers at the front and a 240mm single-disc dual-piston caliper combination at the rear, paired with dual-channel ABS for superior braking performance. Performance Configuration: It continues to use the stable 300mL twin-cylinder, four-stroke, eight-valve water-cooled engine, delivering a maximum power of 26kW (at 12000r/min).
1
2
Share

What is the Difference Between 18-inch and 19-inch Wheels?

18-inch and 19-inch wheels have similar tire widths, and the rolling radius error is less than 0.4%, which means they should have almost the same footprint. The specific differences between the two are as follows: 1. In terms of braking performance on dry roads, there is almost no difference between 18-inch and 19-inch tires. However, 18-inch tires perform better on wet roads, and they also excel in cornering hydroplaning. 2. During dry handling tests, the subjective feel of the tires shortens as the size increases. The faster lap times of 19-inch tires are not because the larger wheel size provides more grip, but because these tires offer sharper and more responsive steering, while 18-inch tires make the car feel softer and less precise. Therefore, 19-inch tires give the driver more confidence and stability, with a stronger subjective sense of control.
10
3
Share

What is the fuel consumption of the Regal 1.5t?

The comprehensive fuel consumption of the Regal 1.5t is approximately 8.6 liters per 100 kilometers. The fuel consumption of a car depends not only on the car itself but also on the driving conditions and the driver's habits. Below is relevant information about the Regal's engine: 1. The Regal is equipped with two engines: one is a 1.5-liter turbocharged engine, and the other is a 2.0-liter turbocharged engine. 2. The 1.5-liter turbocharged engine has a maximum power of 125 kW, a maximum torque of 252 Nm, a maximum power speed of 5600 rpm, and a maximum torque range of 2000 to 4000 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. 3. The 2.0-liter turbocharged engine has a maximum power of 192 kW, a maximum torque of 350 Nm, a maximum power speed of 5400 rpm, and a maximum torque range of 2000 to 5000 rpm. This engine also features direct fuel injection technology and uses an aluminum alloy cylinder head and block. 4. The Regal's front suspension uses a MacPherson independent suspension, and the rear suspension uses a multi-link independent suspension. The Regal is equipped with an electric power steering system.
6
0
Share

What Causes the Steering Wheel to Lean to the Right?

Reasons for a car's steering wheel leaning to the right: 1. Excessive play in the steering gear. 2. Inconsistent tire pressure among the four tires. 3. Misalignment of the front wheel positioning angles, excessive toe-in. 4. Front tire pressure too high or too low, or dynamic imbalance due to tire repairs or other reasons. Here are the adjustment methods for a steering wheel leaning to the right: 1. Adjust from the left and right tie rods of the steering gear—tighten one side while loosening the other to straighten the steering wheel. 2. If the steering wheel is off by just one spline tooth, you can also remove the steering wheel and rotate it by one tooth's angle. 3. Unequal left and right steering angles. If a four-wheel alignment has been performed, the steering wheel angle discrepancy will be minimal. Adjusting from the left and right tie rods of the steering gear will not significantly affect the steering angle.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.