What does the BC button on a BMW mean?

Where is the tire pressure reset button on the New Baojun?

The tire pressure reset button on the New Baojun is located near the steering wheel, marked with a tire pressure icon. After confirming there are no issues, press the button to reset the tire pressure. Hazards of low tire pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption. Causes heavy steering and tendencies to drift, posing risks to driving safety. Increases movement in various parts of the tire, leading to excessive rolling and abnormal heat generation. Reduces the functionality of the cords and rubber, causing delamination or cord breakage, excessive friction with the rim, and damage to the bead area, resulting in abnormal wear. Hazards of high tire pressure: Reduces tire friction and adhesion, affecting braking performance. Causes steering wheel vibration and drifting, reducing driving comfort. Accelerates wear on the central tread pattern, shortening tire lifespan. Increases vehicle vibration, indirectly affecting the lifespan of other components. Overextends the tire cords, reducing elasticity and increasing the load on the vehicle during driving. Decreases puncture resistance. When encountering sharp objects like nails or glass, the tire is more prone to punctures, leading to internal cracks, blowouts, or tire bursts.

9

3

Share

Why is there no response when shifting gears in a Mercedes-Benz?

There is no response when shifting gears in a Mercedes-Benz, which could be due to two main reasons: first, the brake switch is damaged; second, there is a malfunction in the internal mechanism of the gear shift assembly. Identifying the source of the fault: Turn the ignition switch (EIS) to the ON position or start the engine. Place the palm of your hand on the head of the gear shift lever and press the brake pedal. If there is no vibration felt in the palm after pressing the brake pedal or pressing it multiple times, it indicates that the brake switch is damaged and needs to be replaced. If vibration is felt in the palm every time the brake pedal is pressed, it means the brake switch is functioning properly, and the issue lies in the internal mechanical components of the gear shift assembly. Solution: Replace the gear shift mechanical assembly. Since the plastic clip that locks the gear shift lever is not available as a separate part, the entire gear shift mechanical assembly must be replaced. This repair method is costly. Additionally, after replacing the gear shift mechanical assembly, because the Electronic Shift Module (ESM) is integrated within it, the Mercedes-Benz specialized diagnostic tool must be used for coding. Otherwise, even after replacing the assembly, the gears cannot be shifted. Repair shops and service centers with the specialized diagnostic tool typically adopt this repair method.

13

2

Share

Does Audi Provide a Warning for Low Transmission Fluid?

Audi does not provide a warning for low transmission fluid. Therefore, it is necessary to regularly replace the transmission fluid. Excessive usage time or mileage can cause the transmission fluid to deteriorate, reducing its lubrication effectiveness. This can lead to increased wear and tear on internal transmission components, affecting the shifting performance of the automatic transmission. Signs that indicate the need for transmission fluid replacement include: vehicle shaking, jerky gear shifts; a transmission overheating warning on the dashboard; engine stalling; and unusual noises. The methods for replacing transmission fluid are as follows: Loosen the drain screw at the bottom of the transmission to drain the old fluid before refilling. Remove the transmission oil pan directly to drain and refill the fluid: This method is more thorough than the previous one, as it removes impurities accumulated at the bottom of the oil pan. Use a circulation machine to replace automatic transmission fluid: A smart circulation machine performs dynamic fluid replacement, filtering and cleaning sludge and impurities within the automatic transmission. Hazards of not replacing transmission fluid for an extended period: 1. Damage to the transmission's shift control mechanism; 2. Abnormal wear on gears and clutch plates inside the transmission; 3. Impaired transmission operation, leading to damage to the transmission valve body.

16

0

Share

What does engine EPC mean?

EPC stands for the Engine Electronic Stability System. Generally, there are two possible reasons for the EPC light to illuminate. One is a dirty throttle body, which should be cleaned. The other is malfunctioning brake lights, requiring inspection of the brake switch and wiring. Additionally, poor fuel quality can also trigger the EPC warning light. Solutions for an illuminated EPC light include: 1. Troubleshooting the intake system, using compliant fuel, and cleaning the throttle body. 2. Removing carbon deposits and performing cleaning in relevant areas. 3. Reflashing ECU-related data (this applies when other issues are resolved but the problem persists). 4. Other faults cannot be ruled out, so specific repairs should be based on actual vehicle diagnostic results.

11

2

Share

Is the RAV4 Hybrid a Plug-in Hybrid?

The RAV4 Hybrid is not a plug-in hybrid. Here are the specific details of the RAV4: 1. The RAV4 is a compact 5-door, 5-seat SUV with body dimensions of 4600mm in length, 1855mm in width, and 1680mm in height, a wheelbase of 2690mm, and a fuel tank capacity of 55 liters. 2. It features front-wheel drive, with a MacPherson strut front suspension and an E-type multi-link rear suspension. 3. The RAV4 is equipped with a 2.0L naturally aspirated engine and a CVT transmission, delivering a maximum power of 126 kW at 6600 rpm and a maximum torque of 209 Nm between 4400 and 5000 rpm.

13

1

Share

Does the Car Underbody Guard Affect Heat Dissipation?

Car underbody guards do not affect heat dissipation. The functions of an engine guard are: 1. To prevent mud from covering the engine, which could lead to poor heat dissipation; 2. To protect the engine from impacts caused by uneven road surfaces during driving, preventing engine damage; 3. To extend the engine's service life by avoiding damage from external factors during travel, which could cause the car to break down; 4. To keep the engine compartment clean by preventing road water and dust from entering. The function of the engine is: to convert the thermal energy of gasoline or diesel into mechanical energy by burning the fuel in a sealed cylinder, causing the gas to expand and push the piston to perform work.

11

1

Share

What does the BC button on a BMW mean?

Where is the tire pressure reset button on the New Baojun?

Why is there no response when shifting gears in a Mercedes-Benz?

Does Audi Provide a Warning for Low Transmission Fluid?

What does engine EPC mean?

Is the RAV4 Hybrid a Plug-in Hybrid?

Does the Car Underbody Guard Affect Heat Dissipation?

At how many kilometers does a Scirocco need an overhaul?

What level of car does the Yeti belong to?

What is Chery's service brand?

What does it mean when the engine exhaust system warning light comes on?