What Does the Battery Model Number Mean?

1 Answers
VanChloe
07/30/25 12:03am
For example, the 12V60Ah550CCA battery is explained as follows: Meaning of the numbers in the battery model: 12V indicates the battery voltage is 12V; 60AH represents the battery current value of 60A (AH); 550CCA is the energy value under full discharge (current) at a certain voltage under specific conditions (such as Asian or American standards, etc.). Meaning of other markings on the battery: SAE stands for the American standard, EN for the European standard. That is, according to their respective design standards; 20RC is the full discharge time at a certain voltage under the conditions of a certain standard (such as Asian or American standards, etc.).
Was this review help?
18
4
Share
More Forum Discussions

Where is the three-way catalytic converter of a car located?

The three-way catalytic converter is an important external purification device in the automobile exhaust system, generally installed in the first bulge of the automobile exhaust manifold, resembling a canteen. Below is relevant information: 1. Three-way catalytic converter: The three-way catalytic converter is the most crucial external purification device installed in the automobile exhaust system. It can convert harmful gases such as CO, HC, and NOx emitted by automobile exhaust into harmless CO2, water, and N2. With increasingly stringent environmental protection requirements, more and more automobiles are equipped with devices such as exhaust catalytic converters. It is installed in the engine exhaust pipe, converting through redox reactions into carbon dioxide and nitrogen. 2. Precautions: The three-way catalytic converter is sensitive to sulfur, zinc, phosphorus, and lead. If the gasoline used is of poor quality, it may cause the converter to fail, and excessive carbon deposits in the car can also affect the catalytic effect.
15
0
Share

What's the reason for the motor not responding?

The motor not responding is caused by severe wear of the starter carbon brushes, failure of the starter control mechanism, or damage to the starter clutch. Below are the relevant explanations: Severe wear of the starter carbon brushes: The symptom during startup is weak starting power, and it can be clearly seen through the belt and pulley that the crankshaft is rotating very slowly. When the wear is extremely severe, the starter cannot drive the crankshaft to rotate at all, and only the sound of electric current is heard. Failure of the starter control mechanism: In addition to the starting motor, the starter assembly also includes an electromagnetic control mechanism. When the control mechanism fails, the small flywheel gear cannot engage with the large flywheel gear, making it impossible to start the engine. The symptom is that when turning the key to ignite, only the sound of the starter rotating at high speed is heard, without the sound of the engine crankshaft flywheel operating. Damage to the starter clutch:
11
5
Share

Where is the headlight switch on the Kawasaki 400?

The turn signal is in the middle of the left handlebar. Pushing it to the left activates the left turn signal, and pushing it to the right activates the right turn signal. Here are the detailed descriptions of the related functions: Headlight: To alert other vehicles to yield, the always-on function is equivalent to the currently popular daytime running lights, and it also helps stabilize the charging system to some extent. How to turn on the headlight: On the left side of the combination switch on the handlebar, the turn signal switch can be rotated forward to turn on the headlight, which has two positions: the first position is for the small light, and the second position is for the headlight. There is also a switch on the left side of the instrument panel that serves as the headlight switch. This switch is relatively large and is operated by rotating it to the right. The first position is for the small light, and the second position is for the headlight.
15
2
Share

How long does it take to receive a renewed driver's license by mail?

It takes three to five days to receive the new driver's license by mail after renewal. Driver's license validity period: Article 56 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses": If a motor vehicle driver has not accumulated 12 penalty points in any scoring cycle during the six-year validity period of the motor vehicle driver's license, the driver's license will be renewed with a ten-year validity period; if the driver has not accumulated 12 penalty points in any scoring cycle during the ten-year validity period of the motor vehicle driver's license, the license will be renewed with a long-term validity. Time regulations for driver's license invalidation: If the license expires less than one year, it can be renewed normally; if it expires between one and three years, the license will be canceled, but it can be renewed by passing the subject one exam; if it expires more than three years, the license will be invalid and cannot be renewed.
3
1
Share

What Causes a Car's Air Conditioning to Stop Cooling During Midday High Temperatures?

Reasons and solutions for a car's air conditioning not cooling: 1. Insufficient refrigerant in the car's air conditioning: Prolonged use of the car's air conditioning can deplete the refrigerant, leading to inadequate cooling and affecting the air conditioning's performance. Solution: Refill the air conditioning refrigerant. 2. Refrigerant leakage in the car's air conditioning: Once the refrigerant leaks, both the indoor and outdoor units of the car's air conditioning will operate normally, but there will be no cooling effect, resulting in the air conditioning not cooling. Solution: Inspect the car's air conditioning system for damaged components such as pipelines, air conditioning pumps, condensers, and evaporator boxes that may cause refrigerant leakage, then replace the faulty parts. 3. Dirty condenser in the car's air conditioning: If the car's air conditioning is not cleaned after prolonged use, various impurities can cover the condenser, preventing it from dissipating heat properly. This leads to excessive pressure and temperature in the air conditioning system, causing the air conditioning pump to stop working to protect the system, resulting in no cooling.
2
4
Share

Which direction should the shading surface of H4 LED headlights face?

H4 LED headlights perform better when the LED chips are oriented left and right. Below is relevant information about LEDs: 1. Introduction: LED automotive lights refer to the use of LED technology for both interior and exterior lighting in vehicles. Exterior lighting involves thermal limits and EMC issues, along with numerous complex standards for load testing. LED automotive lights can be widely used to create the vehicle interior environment, with a lifespan of 50,000 hours. The robust structure of LEDs makes them less susceptible to vibration, and there is no significant decrease in light output brightness during use. 2. Suitable applications for LED automotive lights: LED automotive lights are suitable for various automotive electronic lighting applications, including headlights (high beam and low beam), fog lights, taillights, brake lights, turn signals, daytime running lights, pedal illumination, instrument panel lights, license plate lights, door lights, interior lighting, marker lights, navigation, entertainment systems, backlighting, and indicator lights.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.