What does the battery +- display in a car mean?

What is the best engine oil model for Nissan Sylphy?

For Nissan Sylphy, the original 5W30 model engine oil is recommended. The 5W30 model oil has high viscosity, which is beneficial for forming an oil film on the engine to protect it. It offers excellent high-temperature protection and better sealing performance. Using 5W30 is sufficient to allow the engine to perform at its best. Methods for selecting engine oil: During maintenance, Nissan 4S shops usually provide three types of engine oil for Sylphy: conventional oil, synthetic oil, and full synthetic oil. The choice among these three mainly depends on the vehicle's driving environment. If the driving environment is good, such as frequent highway driving, conventional oil is sufficient. If the vehicle is often used in city traffic with frequent stops and starts, synthetic oil is recommended. Choose engine oil from well-known brands or large manufacturers: For example, Shell, Mobil, Castrol, Caltex, Total, BP, Valvoline, Fuchs, GS. Domestic well-known brands include Kunlun, Great Wall, and Longpan. Steps for changing engine oil: Open the engine hood (remove four clips). Open the oil cap, insert the oil extractor hose into the oil dipstick port to extract the oil. The extraction process takes about 15-20 minutes, and the used oil can be collected in a bucket. After the oil extraction is complete, use a wrench and socket to remove the old oil filter. Clean any excess oil from the contact area, then install the new oil filter. (Note: Usually, the oil filter is located on top, but for some models, it may need to be accessed from underneath the car.) After adding new oil, check the oil level using the dipstick. For the first check, wipe the dipstick clean with a tissue and reinsert it. The second time you pull out the dipstick, you can determine the oil level. The dipstick has upper and lower limit marks, and the oil level should be between these two marks for normal operation.

11

5

Share

What is the fuel consumption per 100 kilometers for the Volkswagen Lamando?

There are currently 3 available models of the Volkswagen Lamando. The DSG Comfort Edition and DSG Luxury Shadow Edition are both equipped with a 150-horsepower engine, with an NEDC fuel consumption of 5.6L per 100 kilometers. The DSG Fashion Edition is equipped with a 131-horsepower engine, with an NEDC fuel consumption of 5.4L per 100 kilometers. The fuel tank capacity of the Volkswagen Lamando is 51L. The distance that can be covered on a full tank of fuel is as follows: For the DSG Comfort Edition and DSG Luxury Shadow Edition, the distance on a full tank is 51/5.6*100=911km. For the DSG Fashion Edition, the distance on a full tank is 51/5.4*100=944km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, can increase fuel consumption. The car itself: Cars with larger engine displacement generally consume more fuel than those with smaller displacement because larger displacement usually means higher power, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Environmental temperature: In low temperatures, the engine block is cold, and the gasoline injected during a cold start does not atomize easily, requiring more gasoline to be injected for combustion, thus increasing fuel consumption. Additionally, in cold weather, the engine's computer will control the engine to run at higher RPMs to warm up, which also increases fuel consumption.

7

5

Share

Can I Register a Car Bought in Another Location with My Hometown License Plate?

It is possible to register a car bought in another location with your hometown license plate. According to national regulations, as long as the vehicle has proper invoices, certificates, purchase tax, and compulsory insurance, you can complete the registration process in your hometown for any vehicle purchased from a legitimate car market nationwide. Before purchasing a car, make sure to check for the vehicle's official invoice and certificate, commonly referred to as the "big book." This is especially important for used cars. For new cars, you can purchase basic insurance like compulsory insurance in your hometown using the vehicle identification number (VIN) (if you are not present, relatives or friends can handle it for you). For used cars, verify that the insurance is still valid. If the insurance has expired, the vehicle cannot be driven on the road, and you won’t be able to register it in your hometown. Additionally, when buying a car in another location, besides the purchase invoice, you need to prepare documents such as the vehicle certificate, warranty card, user manual, three-guarantee certificate, and purchase tax declaration form to complete the purchase tax process back in your hometown. Vehicle registration process at the DMV: Photography: The photographer will set up a number plate based on the last four digits of the VIN, place it at the lower right corner of the windshield, and take a photo of the car. Rubbing: Rubbing is usually done in the DMV inspection area. Ensure that the required number of rubbings is complete, as two copies of the engine number and three copies of the VIN are needed for registration. Inspection: All domestic brand vehicles are exempt from inspection. Non-exempt vehicles must undergo inspection, including checks on power, lights, emissions, and brakes. Criminal investigation: After obtaining the rubbings of the engine number and VIN, fill out the criminal investigation vehicle inspection form at the criminal investigation office. Vehicle inspection: Submit the prepared documents to the on-site police officer for inspection in the designated area. Obtaining the vehicle license and registration certificate: After selecting a license plate number, the staff will print the vehicle license receipt and request payment. Vehicle and vessel tax payment: After obtaining the vehicle license and registration certificate, make a copy and pay the annual vehicle and vessel tax at the DMV. License plate installation: Take the vehicle license and registration certificate to the inspection area, where workers will retrieve the reflective license plate from the storage and install it. Green environmental label: Bring all required documents (for private cars: vehicle license, registration certificate, and owner's ID; for company cars: vehicle license, registration certificate, and business license or organization code certificate) to receive the green environmental label for free.

20

1

Share

Are there national regulations for standard parking space dimensions?

According to the "Urban Road On-Street Parking Space Setting Standards," the standard dimensions of parking spaces are determined based on vehicle size. Small vehicle parking spaces typically measure 2.5~2.7 meters in width and 5~6 meters in length. The width of a single-lane turning lane should be no less than 3.5 meters, while a double-lane turning lane should be no less than 5 meters. The turning area should accommodate a vehicle's ability to complete a one-time turn. For safety or to accommodate medium and large vehicles, the length is often set to 6 meters or more. Details are as follows: (Length ≤ 6m, width ≤ 1.8m) vehicles: The minimum spacing between vehicles should be no less than 0.5 meters, and the spacing between vehicles and walls or the ends of parking spaces should also be no less than 0.5 meters. (6m < length ≤ 8m, 1.8m < width ≤ 2.2m) vehicles: The spacing between vehicles should be no less than 0.7 meters. Large vehicle parking spaces: Length ranges from 7 to 10 meters, and width is 4 meters, depending on the specific vehicle model. According to the "Architectural Design Standards for Vehicle Garages," the dimensions for small vehicle indoor parking spaces are as follows: The external design dimensions for small vehicles are 4.8m (length) x 1.8m (width) x 2.0m (height). For perpendicular parking, the minimum parking space dimensions should be 5.3m (length) x 2.4m (width), with a minimum driveway width of 5.5m at the front. The minimum distance between small vehicles and side walls should be 0.6m, and the minimum distance to front and rear walls should be 0.5m. Generally, a parking space covers about 16 square meters. Under building regulations, the legally mandated standard size for indoor parking spaces is 6m x 2.5m, though smaller spaces of 5.5m x 2.5m can also be set up. Mechanical parking spaces must not be smaller than 5.5m in length, 2.2m in width, and 1.8m in height (measured at the outer edge). Therefore, the mechanical width should be deducted, resulting in slightly reduced dimensions, but the height should still not be less than 1.8m. Modern underground garages are large in scale and accommodate numerous parking spaces. To ensure smooth vehicle movement, driveways are planned to be relatively wide. Driveways, as horizontal passages dedicated to parking spaces, account for the majority of the allocated floor area, often occupying 50% or more of the total parking space area. Parking space arrangements can be categorized into three types: parallel, angled (30°, 45°, 60°), and perpendicular. Large vehicle parking spaces should not use angled or perpendicular arrangements. Specifics are as follows: Parallel parking spaces: Standard length is 6 meters, and width is 2.5 meters. Angled parking spaces: The diagonal length should be 6 meters, width 2.8 meters, with a vertical distance of 2.5 meters between the two angled lines. Perpendicular parking spaces: Length should be at least 5 meters, typically set at 6 meters, with a width of 2.5 meters. The optimal standard size is 2.5m x 5.3m. The "Road Traffic Safety Law" stipulates that on-street parking spaces cannot be set up on roads with a width of less than 6 meters. Pedestrian crossings, expressways, and main roads are also prohibited from having parking spaces. Within urban road limits, government authorities may designate parking spaces where pedestrian and vehicle traffic is not obstructed. On-street parking spaces should not interfere with non-motorized vehicle passage or encroach on their space. They should not be placed near intersections, building entrances, or bus stops. Vehicle types and parking durations should be specified via signage, and impacts on vehicle flow should be minimized. Additionally, on-street parking spaces must not be equipped with ground locks to prevent private occupation. Roads prohibiting parking may have barriers, posts, or bollards installed. After removal or cancellation of parking spaces, all related signs, markings, and facilities should be promptly cleared to prevent illegal parking and ensure road safety. Furthermore, on-street parking spaces should not be set up within 200m~300m of off-street public parking lots. Quantitative regulations for on-street parking spaces: The "Urban Road On-Street Parking Space Setting Standards" provides quantitative rules based on road width. For two-way roads, parking spaces can be set on both sides if the actual road width exceeds 12 meters; if between 12m and 8m, only one side is allowed; if below 8m, no parking spaces are permitted. For one-way roads, parking spaces can be set on both sides if the actual width exceeds 9 meters; if between 9m and 6m, only one side is allowed; if below 6m, no parking spaces are permitted. Regarding disabled parking spaces, the standards require that on-street parking spaces should include disabled-accessible spaces, accounting for no less than 2% of the total. If there are over 20 parking spaces, at least one disabled-accessible space should be provided. Parking space marking colors: White: Paid parking spaces; Blue: Free parking spaces; Yellow: Reserved parking spaces; Time-limited parking spaces: Dashed borders with a line width of 10cm; the permitted parking time should be marked inside the border, with numbers 60cm in height. Disabled-accessible parking spaces: Special markings indicate these spaces. Yellow grid lines on either side designate no-parking zones for disabled passenger loading/unloading. Other vehicles must not occupy these spaces. The yellow grid lines should be 120cm wide, with outer lines 20cm thick and inner fill lines 10cm thick at a 45° angle. The outer line length should match the parking space marking length. On-street parking spaces should not be set in the following cases: Fire lanes, road sections with no-parking signs/markings, or construction zones obstructing traffic; Roads designated for disaster relief or emergency evacuation; Sidewalks, unless they do not encroach on tactile paving for the visually impaired; Near building entrances; Intersections, railway crossings, sharp curves, narrow roads under 4m wide, bridges, steep slopes, tunnels, or within 50m of such locations.

13

3

Share

How Many Gears Does a CVT Have?

CVT continuously variable transmission has at least four gears. Here is some relevant information about CVT: 1. Concept: CVT refers to a type of automotive transmission, also known as a continuously variable transmission. The difference between CVT and geared transmissions is that the transmission ratio is not a series of discrete points but a continuous range of values, which achieves good fuel economy, power performance, and smooth driving, while also reducing emissions and costs. 2. Working Principle: In a CVT transmission system, traditional gears are replaced by a pair of pulleys and a steel belt. Each pulley is actually a V-shaped structure composed of two conical discs. The engine shaft is connected to the small pulley, which drives the large pulley through the steel belt.

20

5

Share

Will CT films get damaged if left in a hot car?

CT films will not get damaged if left in a hot car. Below is some relevant information about automobiles: 1. Definition of an automobile: According to the latest Chinese national standard "Terms and Definitions of Automobiles and Trailers" (GB/T 3730.1-2001), an automobile is defined as follows: A non-track vehicle powered by an engine, with four or more wheels, mainly used for transporting people and/or goods; towing vehicles that carry people and/or goods; or for special purposes. 2. Introduction to domestic automobile brands: Domestic automobile brands include Hongqi, Changan, Great Wall, Chery, Geely, Roewe, BYD, etc.

6

1

Share

What does the battery +- display in a car mean?

What is the best engine oil model for Nissan Sylphy?

What is the fuel consumption per 100 kilometers for the Volkswagen Lamando?

Can I Register a Car Bought in Another Location with My Hometown License Plate?

Are there national regulations for standard parking space dimensions?

How Many Gears Does a CVT Have?

Will CT films get damaged if left in a hot car?

When Did Tesla Enter China?

What does M/S gear mean?

What colors are available for the Yuexiang?

What is the fuel tank capacity of the Volvo XC90 in liters?