···
Log in / Register

What does the average fuel consumption on a car mean?

5 Answers
Jimenez
07/29/25 9:55am

Average fuel consumption generally refers to the combined fuel consumption, which is the average value of fuel consumption under several different road conditions under specific conditions. Usually, the combined fuel consumption is "calculated" based on the fuel consumption in urban and suburban areas. Average fuel consumption is what is commonly referred to as fuel consumption, defined as the amount of fuel used per unit distance traveled by the vehicle, commonly measured in liters per 100 kilometers (L/100km), i.e., fuel consumption per 100 kilometers. The calculation method is as follows: 1. The basic calculation method is fuel consumption per 100 kilometers: That is, divide the actual fuel consumption by the actual distance traveled. Fuel consumption per 100 kilometers = fuel consumption (liters) ÷ distance traveled (kilometers) * 100. 2. An easy-to-learn method to calculate your car's fuel consumption per 100 kilometers: 1. Find a gas station and fill up the tank; 2. Reset the trip meter on the odometer and hit the road; 3. When the trip meter reaches approximately 100 kilometers (it doesn't have to be exactly 100 kilometers, as it's impossible to reach a gas station precisely at 100 kilometers), find another gas station and fill up the tank to the same level as before, recording how many liters of fuel were added; 4. Divide the recorded amount by the kilometers on the trip meter and multiply by 100 to accurately determine your car's fuel consumption per 100 kilometers.

Was this review help?
11
5
Share
MacAnthony
08/13/25 12:04pm

Average fuel consumption is the indicator of a vehicle's fuel efficiency, showing how much fuel is burned per 100 kilometers driven. After years of driving, I've learned it's calculated in real-time by the onboard computer based on sensor data like engine temperature, vehicle speed, and throttle position. When the value is higher than usual, I check if tire pressure is low or the air filter is dirty and needs replacement; frequent hard braking in city traffic can also cause fuel consumption to spike. Monitoring this value helps me address minor issues before they escalate, saving fuel costs. Optimizing it even extends the vehicle's lifespan—especially when resetting it before long trips to recalculate current values, allowing more accurate fuel stop planning. In short, making a habit of tracking this metric saves hassle and money, as it's a key technical signal of engine health.

Was this review help?
8
3
Share
Expand All
VanKyle
10/06/25 8:37am

As an ordinary office worker who commutes by car every day, I pay special attention to the average fuel consumption, which tells me how many liters of fuel are burned per 100 kilometers. If the number is high, I have to reflect on whether I stepped on the gas pedal too hard or used the air conditioner too much, which consumes energy. Once, the number suddenly shot up, and upon checking, I found that the engine oil needed to be changed. After the change, it immediately dropped. This thing helps me control my monthly fuel expenses and estimate next month's spending. During daily driving, maintaining a constant speed and avoiding congested routes keeps the number looking good. I also recommend comparing it with the instantaneous fuel consumption to observe changes. Developing small habits can save a lot of money, and it's very practical.

Was this review help?
4
4
Share
Expand All
McJordan
11/20/25 3:17am

I care about an eco-friendly lifestyle, and the average fuel consumption indicates how much my car impacts the environment. A lower value means fewer carbon emissions and less resource consumption. If I accelerate aggressively or idle frequently while driving, the average increases. I maintain a low fuel consumption by driving gently and servicing my car regularly, which helps reduce air pollution and greenhouse gas emissions. Choosing high-efficiency models or hybrids can further lower this value. Social progress requires everyone's effort, so I strive to keep it at a low level to contribute to the planet's ecology.

Was this review help?
8
5
Share
Expand All
OEliana
01/10/26 4:53am

As a new driver who just got my license, average fuel consumption is quite straightforward for me: it simply means how much fuel is used per 100 kilometers, displayed on the screen as something like 8L/100km. This number helps me understand my car's condition; if it suddenly spikes, I know it's time to check tire pressure or do a quick maintenance. In actual driving, this metric prevents me from unexpectedly running out of fuel. Don't underestimate it during the novice period—safety comes first and it saves money too. Starting with the basics makes things much easier.

Was this review help?
11
3
Share
Expand All
More Forum Discussions

What is the reason why the car fan is still running after parking and turning off the engine?

The reason why the car fan is still running after parking and turning off the engine is to cool down the engine. When the temperature of the coolant is too high after parking, the vehicle's computer will automatically calculate the fan's speed and duration. The higher the temperature, the longer the fan will run, which serves as protection for the engine. The working principle of the car cooling fan is: utilizing the principle of electromagnetic induction, using Hall sensing components as synchronous detection devices to control a set of circuits, switching the power-on sequence of the windings to generate a rotating magnetic field, thereby achieving electronic commutation in a mechatronic system. The cooling fan is installed between the engine and the radiator. When the fan blades rotate driven by the engine, they generate high-speed airflow, which carries away the heat from the coolant in the radiator, thus achieving the purpose of cooling the engine.
8
2
Share

What does it mean when the car's off light is on?

The car's off light being on indicates that the Electronic Stability Program (ESP) has been turned off or that there is a malfunction in the ESP system. The main warning lights in a car include: 1. A triangle with an exclamation mark in the middle is the general fault indicator light. 2. A yellow symbol with parentheses, a horizontal line at the bottom, not fully enclosed at the top, and an exclamation mark inside is the tire pressure monitoring warning light. Other warning lights in a car include: 1. A yellow light bulb with an exclamation mark is the lighting fault indicator light. If this light is on, it indicates a fault with an exterior light bulb. 2. A yellow gear with an exclamation mark is the transmission fault indicator light, visible in cars equipped with multitronic transmissions. When this light is on, it indicates an abnormality or fault in the transmission. 3. A yellow sector with an exclamation mark is the windshield wiper fault indicator light. When this light is on, it indicates a fault in the wiper system. 4. A red steering wheel with an exclamation mark on the right is the steering system fault indicator light. If this light is on, it may indicate that the electric/mechanical steering mechanism is not working or there is a fault with the steering column lock, in which case the car should not be driven further.
16
4
Share

How to Deal with Yellowing Car Light Covers?

Methods to deal with yellowing car light covers include: 1. Clean the light cover with soapy water; 2. Soak sandpaper in cold water for 10 minutes, then evenly rub the headlight housing with the sandpaper; 3. Wipe clean with a towel; 4. Spray a layer of clear oil on the light cover. Methods for maintaining car headlights include: 1. Regularly check the light cover to avoid water droplets; 2. Replace headlights periodically; 3. Adjust the headlight height properly; 4. Use high-quality bulbs; 5. Prevent foreign objects from hitting the lights. The functions of car lights are: 1. Turn on the turn signal to alert following vehicles and reduce rear-end collisions; 2. Improve visibility of road conditions and enhance driving safety; 3. Inform vehicles behind that you are braking, prompting them to slow down.
17
2
Share

What Type of Air to Use for Windshield Fog?

For windshield fog, both cold and warm air have their own advantages and disadvantages. Below are some methods for defogging: Method 1: If you notice fog forming on your car windows, don't panic. You can open both side windows slightly, about the width of a fist. This allows air to circulate inside the car, blowing away the moisture and quickly dispersing the fog. Method 2: Turn on the car's fan and air conditioning. When cold air blows onto the glass, the fog will quickly dissipate. This happens because the cold air prevents moisture from condensing on the glass, effectively removing the fog. Method 3: Warm air can also help remove fog. However, if the glass is already fogged up while driving, turning on the warm air may worsen the fogging. Therefore, avoid using warm air to defog while driving. Instead, use warm air to dry the glass before driving. After a few minutes, the warm air will dry the moisture inside the car, and the fog will disappear. Note that the rear and side windows heat up more slowly, so it may take longer to completely remove the fog. Method 4: Use a preventive method like applying anti-fog spray. Spray a small amount of anti-fog agent onto the car windows and wipe it clean. This removes dirt and stains while forming a thin, transparent protective film on the glass. This film effectively prevents moisture from condensing and forming fog, making it especially useful in cold winters.
7
0
Share

Which car has a crown-like logo?

The car with a crown-like logo is the Toyota Crown series. The Crown is a mid-to-large-sized vehicle brand under the Toyota Group, with the silver variant belonging to the new 13th generation and the gold variant to the 12th generation. The Toyota Crown comes in four models with seven different grades, all equipped with a 3.0L dual VVTI engine and a 6-speed automatic transmission. The vehicle incorporates advanced braking technology and various excellent driving assistance features, including TRC traction control system, VSC vehicle stability control system, and VDIM vehicle dynamics integrated management system, ensuring high traction performance under various road conditions.
7
1
Share

What does the AC button on a car mean?

The AC button on a car refers to the air conditioning cooling switch. Pressing the AC button activates the air conditioning to adjust the temperature according to the set level, during which the air conditioning compressor starts, increasing the engine load. The functions of the air conditioning system include: 1. Regulating the temperature, humidity, airflow, and cleanliness of the air inside the vehicle; 2. Filtering the air inside the car, with a sterilizing effect; 3. Clearing fog from the windows. Precautions for using car air conditioning: 1. Turn off the AC during startup and rapid acceleration; 2. Avoid setting the air conditioning temperature too low—a difference of 5 to 6 degrees between the inside and outside temperature is sufficient; 3. Based on the principle that cold air sinks and hot air rises, when controlling the air vents, aim them upward when cooling and downward when heating.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.