What Does the Automotive Transmission System Consist Of?

1 Answers
LaBradley
07/30/25 8:46am
Automotive transmission system consists of clutch, gearbox, universal transmission device, final drive, differential, and half-shafts. The functions of the transmission system are: 1. To ensure the vehicle has the necessary traction and speed under various driving conditions, and to coordinate the changes between traction and speed; 2. To provide the vehicle with good power performance and fuel economy; 3. To enable the vehicle to reverse and allow the left and right drive wheels to adapt to differential requirements; 4. To smoothly engage or completely and quickly disengage power transmission as needed. The composition and layout of the automotive transmission system vary depending on the type of engine, its installation position, and the intended use of the vehicle.
Was this review help?
16
3
Share
More Forum Discussions

What is a Ferrari car?

Ferrari is an Italian luxury sports car manufacturer, with models including: Ferrari 488, Ferrari 812, Ferrari 458, Ferrari F8, Ferrari F430, etc. Taking the 2020 Ferrari 812 as an example, it is a 2-door 2-seater hardtop convertible with body dimensions of: length 4693mm, width 1971mm, height 1276mm, wheelbase 2720mm, fuel tank capacity 92L, and trunk capacity 210L. The 2020 Ferrari 812 is equipped with a 6.5L naturally aspirated engine, delivering maximum horsepower of 800PS, maximum power of 588kW, maximum torque of 718Nm, paired with a 7-speed dual-clutch transmission.
20
1
Share

What are the differences between FAW-Volkswagen and SAIC Volkswagen?

The differences between FAW-Volkswagen and SAIC Volkswagen are: 1. Different engine models: FAW-Volkswagen's engine model is EA211-DLS; SAIC Volkswagen's engine model is EA211-DJS. 2. Different tire models: FAW-Volkswagen's tire model is 205/55R16; SAIC Volkswagen's tire model is 225/60R16. 3. Different rear suspensions: FAW-Volkswagen uses a torsion beam non-independent suspension; SAIC Volkswagen uses a multi-link independent suspension. Both FAW-Volkswagen and SAIC Volkswagen use a 7-speed dual-clutch transmission.
13
3
Share

When starting a manual transmission car, should you engage the gear first or release the handbrake first?

When starting a manual transmission car, you should engage the gear first, then release the handbrake. As a beginner, the reason for engaging the gear before releasing the handbrake during startup is primarily for safety considerations. When starting, the driver may not know whether the ground is level. If it's on a slope, releasing the handbrake first would leave the car in a neutral coasting state, causing the vehicle to roll in the direction of the slope without any braking, which could easily lead to a safety accident. However, if you engage the gear first and then release the handbrake, the car in first gear will receive a force from the engine idle speed. This force can prevent the vehicle from rolling backward in neutral, effectively avoiding potential dangers. Therefore, the correct starting procedure for a manual transmission should be: press the clutch, press the brake, engage the gear, release the handbrake, release the brake, lift the clutch, and start moving. The sequence for stopping is the opposite of starting. When parking, you should first apply the handbrake and then shift to neutral. This ensures the vehicle won't move to the greatest extent possible. This is because many people tend to release the clutch and brake after shifting to neutral. If the gear isn't properly engaged in neutral or the parking spot is on a slope, the vehicle may move.
3
0
Share

Is it normal for the Audi A4 engine to shake when starting?

Audi A4 engine shaking when starting is not normal. The reasons for engine shaking include: excessive carbon buildup in the cylinders, throttle, spark plugs, intake system, and engine. Taking the 2021 Audi A4 as an example, it belongs to the mid-size car category, with body dimensions of: length 4762mm, width 1847mm, height 1436mm, wheelbase of 2825mm, fuel tank capacity of 54 liters, and curb weight of 1665kg. The 2021 Audi A4 is equipped with a 2.0T turbocharged engine, with a maximum horsepower of 204PS, maximum power of 150kW, maximum torque of 320Nm, paired with a 7-speed dual-clutch transmission.
16
0
Share

Can Subject 4 be Taken in Advance?

Subject 4 cannot be taken in advance. In principle, you must take the exam at the same location where you registered. The Subject 3 Safety and Civilized Driving Knowledge Test (Subject 4) can only be taken after passing the Subject 3 Road Driving Skills Test. Candidates who fail the exam can directly apply for a retake, and their previously passed road driving skills test scores remain valid. There is no limit on the number of times you can schedule the Subject 1 and Subject 3 Safety and Civilized Driving Knowledge Test (Subject 4). If you fail Subject 4, you do not need to retake the previously passed subjects (Subject 1, Subject 2, Subject 3). You can schedule a retake on your own, and no additional fees are required for the retake. Currently, there is no scheduling limit for the Safety and Civilized Driving Theory Test. However, the driving skills test permit is valid for three years. If an applicant fails to complete the test within the validity period, their previously passed subject scores will become invalid. Notes for the Subject 4 Exam: Sit upright to ensure your face can be captured by the camera; you do not have to answer questions in order, but each question allows only one selection—once an answer is clicked and confirmed, it cannot be changed; if you answer 5 questions incorrectly before completing the exam, the system will automatically terminate the session and notify you of the failure, requiring you to reschedule a retake; after the new driving test regulations, the exam format has changed—multiple-choice questions increased from 5 to 10, so be careful not to miss or over-select options.
1
0
Share

Does the Excelle Have a Four-Cylinder Engine?

The Excelle is equipped with a four-cylinder engine. The engine has a displacement of 1485ml, naturally aspirated intake, multi-point fuel injection, with a maximum horsepower of 113ps, a maximum power of 83kw, and a maximum torque of 141nm. It is paired with a 6-speed automatic transmission. Taking the 2021 Excelle as an example, it belongs to the compact car category, with body dimensions of: length 4609mm, width 1798mm, height 1464mm, a wheelbase of 2640mm, front track of 1538mm, rear track of 1541mm, a fuel tank capacity of 44l, and a curb weight of 1270kg.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.