What does the automatic transmission indicator mean?

How to Turn Off the Automatic Engine Shutdown When Braking Function?

Automatic engine shutdown function can be turned off by pressing the AOFF button located above the one-touch start button. The purpose of the automatic engine shutdown function is that when this switch is activated, the vehicle will not continue moving even after releasing the brake pedal during driving.

12

0

Share

How to Deal with Malibu Rearview Camera Malfunction?

Here are the solutions for Malibu rearview camera malfunction: 1. It might be related to the wiring or the rearview camera. 2. You can go to Bowen Rearview Camera for inspection. 3. The ü button on the central control panel is used to turn the rearview camera system on or off. 4. When the function is activated, the indicator light next to the button will illuminate; it will turn off when deactivated. 5. To enable or disable the rear parking assist symbols or guide lines. Below is a brief introduction about the car rearview camera system: 1. The rearview camera system provides a more intuitive, clear, and comprehensive display of the environment behind the car when reversing, making it one of the most practical configurations for reversing safety. 2. When the car is shifted into reverse gear, the rearview camera system automatically activates the high-definition camera located at the rear of the car, displaying a clear and comprehensive view of the area behind the car on the LCD screen, allowing the driver to accurately and directly assess the road conditions behind the vehicle, making reversing as convenient as driving forward. 3. The rearview camera system has been widely used in various large, medium, and small vehicles for reversing or driving safety assistance.

6

0

Share

What is the tire size of the Wuling Hongguang S?

The tire specifications for the Wuling Hongguang S are 14-inch, with two size options: 175/70-R14 and 185/70-R14. Generally, the tire size specifications are marked on the sidewall of the tire. Here, 175 indicates the tire width of 175 millimeters, 70 represents the aspect ratio of 70, R stands for radial tire, and 14 means it can be mounted on a 14-inch rim. Below are the functions of the Wuling Hongguang S tires: 1. Tires serve as the medium for transmitting forces between the vehicle and the road, including driving force, braking force, and steering force, thereby enabling the vehicle's driving, braking, and steering operations. 2. Supporting the vehicle load. The vehicle's load causes the tire to compress until the average pressure on the contact area balances with the internal inflation pressure. 3. Reducing and absorbing vibrations and impacts during driving, preventing early damage to vehicle components due to severe vibrations. Additionally, tires adapt to high-speed driving conditions, reduce driving noise, and ensure safety, comfort, handling stability, and fuel efficiency.

7

0

Share

What to Do When There's a Clicking Sound but the Engine Won't Start When Turning the Key?

Here are the detailed solutions: 1. Use a household multimeter to measure the car battery voltage to see if it reaches 12V. If the voltage is less than 10V, the vehicle cannot be started, and you must use a charger to recharge it or jump-start the vehicle using another battery. 2. If the battery is normal, use a multimeter to check if there is power coming to the starter's power supply terminal. If there is no power, it indicates a power supply issue in the starting system, and you need to check for loose, broken, or aged wiring connections to the starter. If there is power to the starter but it still doesn't work, the starter relay might be faulty. Check if the starter relay is burned out (usually located in the engine compartment fuse box; refer to the instructions on the fuse box). 3. If the starter is functioning normally, check the ignition system. It's possible that the spark plug's ignition end is dirty with oil, so you need to remove and clean each one individually. Remember to reinstall them in the correct order to avoid poor ignition due to incorrect installation.

9

3

Share

What are the differences between antifreeze and coolant?

The difference between antifreeze and coolant is that antifreeze only has antifreeze function, while coolant has both cooling and antifreeze functions. The full name of coolant is antifreeze coolant, which is a coolant with antifreeze function. Correct use of coolant can not only protect the engine's cooling system to improve heat dissipation, but also enhance engine efficiency and extend its service life. The following are the functions of antifreeze coolant: 1. Anti-corrosion function. The engine and its cooling system are made of metals such as copper, iron, aluminum, steel, and solder. These metals will corrode and rust when in contact with water under high temperatures over time. Antifreeze coolant not only does not cause corrosion to the engine cooling system, but also has anti-corrosion and rust removal functions. 2. Antifreeze coolant has a high boiling point. The boiling point of water is 100°C, while the boiling point of high-quality antifreeze coolant is usually above 110°C, making it less likely to boil when used in summer. 3. Antifreeze coolant can prevent scale. The most troublesome issue for drivers using water as a coolant is scale formation. Scale adheres to the metal surfaces of the radiator and water jacket, gradually reducing heat dissipation efficiency and being difficult to remove. High-quality coolant is made with distilled water and contains scale inhibitors, not only preventing scale formation but also having descaling functions.

1

3

Share

How to Turn on the Heating Air Conditioning in the Tiguan L?

After starting the Tiguan L, wait approximately 8-15 minutes for the water temperature to rise to the normal operating level before turning on the heating. When the water temperature reaches the middle range, adjust the air conditioning circulation mode to internal circulation and set it to heating mode, but do not turn on the AC switch. The method to activate the car's heating system is as follows: 1. After starting the car, wait about 8-15 minutes for the water temperature to reach normal operating temperature (i.e., when the gauge reaches the middle range) before activating the heating. 2. Switch the air conditioning circulation to internal recirculation mode. 3. Set to heating mode (indicated by a red zone or sun symbol on some vehicles). 4. Do not turn on the AC switch, as the heating system utilizes the car's own heat cycle, which saves energy. 5. Adjust the air conditioning to an appropriate fan speed and direct the airflow as desired. 6. Typically, heated air should be directed toward the front and footwell areas, while cooled air is usually directed forward.

20

3

Share

What does the automatic transmission indicator mean?

How to Turn Off the Automatic Engine Shutdown When Braking Function?

How to Deal with Malibu Rearview Camera Malfunction?

What is the tire size of the Wuling Hongguang S?

What to Do When There's a Clicking Sound but the Engine Won't Start When Turning the Key?

What are the differences between antifreeze and coolant?

How to Turn on the Heating Air Conditioning in the Tiguan L?

What does the constant illumination of the uy125 engine fault light indicate?

What are the differences between wide tires and narrow tires?

Is 0W40 oil suitable for the new Sylphy?

What technologies are used in the Longqing engine?