What does the autohold function mean?

2 Answers
Eliza
07/24/25 3:50pm
autohold function is the automatic parking function, which refers to a function that allows the driver to avoid unnecessary sliding of the vehicle without the need for long-term braking or activating the electronic parking brake. The automatic parking function can automatically activate the four-wheel braking when the vehicle is waiting for a red light or stopping on a slope. Even in D gear or N gear, there is no need to keep stepping on the brake or using the handbrake, and the car will always remain stationary. The autohold automatic parking function provides accurate parking force through the slope sensor by the controller. When starting the car, the parking control unit calculates the information provided by the clutch distance sensor, clutch engagement speed sensor, throttle pedal sensor, etc. When the driving force is greater than the driving resistance, the parking brake is automatically released, so that the car can start smoothly.
Was this review help?
12
5
Share
Serenity
08/11/25 8:49am
I've been into cars for years, and the autohold feature is pretty cool. Simply put, it automatically holds the brakes for you when you stop, so you don't need to keep pressing the pedal. When you're ready to go, just lightly tap the accelerator to move. It works by monitoring whether the wheels have come to a complete stop through the car's ESP system, and once detected, it automatically applies pressure to the brake pads. It's especially convenient at traffic lights or in heavy traffic, freeing your feet and reducing fatigue. Unlike traditional handbrakes, it's fully automated, requiring no manual operation, making it particularly suitable for automatic transmission cars on slopes. If you haven't driven a car with this feature before, try stopping on flat ground first—the system will automatically light up an indicator to show it's activated. But note that the car must come to a complete stop to trigger it, or it might cause issues. Beginners can get the hang of it with a little practice. Safety-wise, it's great at preventing rollback, making it ideal for city driving veterans looking for a bit more comfort.
Was this review help?
3
0
Share
Expand All
More Forum Discussions

What Causes Persistent Fogging on the Outside of the Windshield?

The reason why the outside of the windshield cannot be defogged may be due to moisture on the exterior after rain. Here are the relevant explanations: 1. Temperature difference between inside and outside the car: Primarily, the large temperature difference between the interior and exterior causes cold air to hit the glass, leading to external moisture condensing on the surface. This is a basic principle of physics. A significant temperature difference between the cabin and the outside or rainy conditions can cause fogging on the windshield and door glass, posing a safety hazard for driving. 2. Precautions: Regularly clean debris and snow near the air conditioning intake to ensure the system functions properly. Generally, the ventilation mode should be set to external circulation to promote better airflow.
4
0
Share

What is the bulb model for the headlights of the Changan Oushang X5?

What is the bulb model for the headlights of the Changan Oushang X5?
17
4
Share

What are the dimensions of the Changan CS55plus in terms of length, width, and height?

The length, width, and height of the Changan CS55plus are 4515mm, 1865mm, and 1680mm respectively. Below is a related introduction to the Changan CS55plus: 1. Positioning: On November 22, 2019, the Changan CS family's new youthful and intelligent CS55PLUS was launched at the Guangzhou Auto Show. The new car offers four configuration models: manual transmission versions in Xuanse and Xuandong, and automatic transmission versions in Xuanse and Xuandong. 2. Interior: The new car adopts a wraparound cockpit design, with the center console and large screen tilted 10 degrees towards the driver's side. It is equipped with a three-spoke flat-bottom multifunction steering wheel and a yacht-style gear lever, making it convenient for the driver to operate. The dual 10.25-inch connected screen design is a major highlight, combined with large-area soft plastic molding and metal brushed finish lines, which not only looks youthful but also enhances the sense of technology.
4
1
Share

Will the insurance company compensate for a new car if it is a water-damaged vehicle?

No, they will not compensate for a new car. The insurance company will compensate for a water-damaged vehicle based on different circumstances. Here are the compensation scenarios for water-damaged vehicles under different conditions: 1. The car is flooded while parked: If the car is flooded while parked and the owner has previously purchased auto damage insurance, the insurance company will compensate. If the car is damaged by falling objects or utility poles during heavy rain or while floating, these are all covered under auto damage insurance. 2. The car is flooded while driving and restarted: If the car stalls due to flooding while driving through water and is restarted, regardless of whether the old version of water-related damage insurance (before the insurance reform on September 19, 2020) or the new version of auto damage insurance was purchased, the insurance company has the right to refuse compensation for engine damage caused by this.
10
5
Share

What Causes Transmission Overheating?

Transmission overheating reasons: Insufficient lubricating oil in the transmission or using lubricating oil with an incorrect specification, excessively tight bearing assembly, excessively tight gasket and washer assembly, or excessively small gear meshing clearance in newly replaced gears. To avoid affecting usage, it is recommended to promptly contact a 4S shop for repair. Below is additional information: 1. When stopping to inspect during driving: Touch various parts of the transmission housing with your hand to check the temperature. If the temperature is bearable to the touch, the oil temperature is normal; if it is unbearable, it indicates an overheating issue. To confirm transmission overheating, first check the lubricating oil level. If it is insufficient, replenish it as required; if the oil is too thin or deteriorated, replace it. If dry friction is caused by excessively small assembly clearance (e.g., overheating near the bearing seat due to excessively tight bearing assembly), disassemble and inspect accordingly, then reassemble following the specifications. 2. Precautions for transmission overheating repair: The normal operating oil temperature for an automotive transmission is 80°C~90°C. Excessive transmission operating temperature can cause premature oil oxidation, especially when the transmission operating temperature exceeds 120°C~200°C, as the antioxidant additives in the oil become ineffective, drastically accelerating oil oxidation. Transmission overheating can be judged based on the overheating location. The causes of overheating are generally: excessively small gear meshing clearance; bent gear shafts or misaligned or non-parallel housing shaft holes; insufficient gear oil or too low viscosity; excessively tight bearing or gasket assembly, etc. If transmission overheating is confirmed through inspection, repair accordingly.
4
1
Share

Is it acceptable to steer with one hand in Subject 2?

Steering with one hand in Subject 2 does not result in point deduction. However, using one hand to steer can make it difficult to gauge how much the wheel has been turned, especially during reverse parking. Additionally, if the steering wheel is heavy, one hand may not be sufficient, leading to delays and potential wheel alignment issues. Below are precautions for Subject 2: 1. Pass Subject 2 within three years: After completing Subject 1, you must pass Subjects 2 and 3 within three years. Failure to do so will invalidate your results, requiring you to re-register for Subject 1. Under new regulations, Subjects 2 and 3 each allow five attempts. If you fail all five attempts, you must retake Subject 1. 2. Failing the test: If you fail Subject 2 on the first attempt, you are allowed one retake. If you skip the retake or fail it again, the test ends, and you must reschedule after ten days. Within the validity period of your driving skill permit, you can schedule Subjects 2 and 3 road tests up to five times. Failing the fifth attempt invalidates all previously passed subjects.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.