What does the auto light in a car mean

1 Answers
ColtonLynn
07/29/25 11:53am
The auto light on a car can refer to the following situations: 1. Auto switch for automatic air conditioning: In automatic air conditioning, pressing the Auto switch will automatically adjust the temperature and airflow inside the cabin. Note that if the driver manually adjusts the airflow, vent position, or defogger switch, the automatic mode will be canceled. 2. Auto switch for wipers: If there is an Auto switch on the wiper control, it means the vehicle is equipped with rain-sensing wipers. When the wiper is set to the Auto position, it can detect the size of raindrops via a rain sensor and automatically adjust the wiper speed. 3. Auto switch for lights: The Auto switch indicates automatic headlights. When the light switch is set to the Auto position, the headlights can detect changes in ambient brightness via a light sensor. The headlights will automatically turn on when it gets dark outside and turn off when it is bright enough. 4. Auto switch for windows: The Auto switch on the driver's side window control means the window has one-touch up/down functionality. Pressing the Auto switch all the way down and releasing it will automatically fully open the window. Pulling the Auto switch all the way up and releasing it will automatically fully close the window. To stop the window midway, pull or press the Auto switch in the opposite direction and then release it.
Was this review help?
7
2
Share
More Forum Discussions

How to Adjust the Angle of Audi A3 Rearview Mirrors?

First, upon entering the vehicle, you can see the angle of the rearview mirrors. The rearview mirror switch is located below the door handle. Rotate the adjustment knob to the upper left corner to select and adjust the left rearview mirror. Rotate the adjustment knob to the upper right corner to select and adjust the right rearview mirror. Rotate the adjustment knob to "0" to turn off the rearview mirror adjustment function.
18
1
Share

How to Open the Fuel Tank Cap on a BMW 730?

Open the driver's side door of the BMW 730li. Engage the handbrake of the BMW 730li to prevent the vehicle from rolling. Pull the fuel tank cap switch located on the left side of the driver's leg area in the BMW 730li. Lift the fuel tank cap outward, unscrew the plastic cap of the fuel tank, and you can proceed to refuel.
10
2
Share

BMW 5 Series Parking Brake Motor Replacement?

Release the brake button, remove the tire, and take off the brake caliper. Remove the rear brake caliper, use a wrench to detach the electronic parking brake motor, then reattach the caliper. Use a specialized brake tool to push the brake caliper back into place. Install the new brake pads, mount the electronic parking brake motor onto the caliper, press the electronic parking brake button several times after installation, and perform a road test if necessary for reset.
13
1
Share

How to Solve the Problem of No Idle Speed on a Motorcycle?

Adjust the throttle adjustment screw and the air adjustment screw. If there is still no idle speed, remove and open the carburetor, and use an air pump to clean all the holes. If there is still no idle speed after reassembly and testing, consider whether the fuel level in the carburetor float chamber is too low or if there is air leakage from the reed valve or crankcase.
18
2
Share

How to Properly Use the Auto Hold Function in Wildlander?

Fasten your seatbelt and activate the auto function while driving. When the vehicle comes to a complete stop during driving. You can release the brake pedal, and the parking indicator will appear on the instrument panel. The vehicle will remain stationary, and the gear can be kept in D or N position. Gently press the accelerator pedal to release the brake. Remember to shift to P gear and engage the parking brake when exiting the vehicle.
20
5
Share

How to Install a Windshield Cover?

Use the left-hand glove of the electric scooter windshield cover to encase both the left handbrake and grip of the scooter, then secure the straps. After fitting the left-hand glove of the windshield cover, fully unfold the windshield cover in preparation for fitting the right-hand glove. Once the windshield cover is unfolded, insert the right hand into the windshield glove and secure the straps of the right-hand glove. After securing both gloves, sit on the electric scooter, cover yourself with the windshield cover, and insert your hands into the windshield gloves to confirm the installation is complete.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.