What does the Audi TPMS malfunction mean?

1 Answers
VanJeremiah
07/29/25 7:25pm
Audi TPMS malfunction indicates that there may be low tire pressure in one of the tires or insufficient battery power in the sensor. Meaning of TPMS malfunction: TPMS stands for Tire Pressure Monitoring System, which functions to automatically monitor tire pressure in real-time while the vehicle is in motion and alerts the driver in case of tire leaks or low pressure to ensure driving safety. Methods to resolve TPMS malfunction: Start the car's engine and turn on the dashboard power. Check the tire pressure for each tire, ensuring all four tires have the same pressure. Press and hold the tire pressure reset control button until the TPMS light turns off, indicating the reset is complete.
Was this review help?
9
0
Share
More Forum Discussions

What is the appropriate tire pressure for Jetta?

The appropriate tire pressure for Jetta is 2.3 to 2.5 bar. The functions of tires are: to cushion the impact during driving, ensure good ride comfort and smooth driving, maintain good adhesion between the wheels and the road surface, improve the traction, braking, and off-road capability of the vehicle, and bear the weight of the car. Taking the Jetta VS5 as an example, it is a compact SUV with a length, width, and height of 4419mm, 1841mm, and 1616mm respectively, a wheelbase of 2630mm, a fuel tank capacity of 51 liters, and a curb weight of 1310kg. The front suspension of the Jetta VS5 is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension.
17
3
Share

Is the Old Sunny 2.0 an Imported Car?

The Old Sunny 2.0 is not an imported car. The engine of the 2004 Old Sunny 2.0 was imported, but the car itself was produced by Dongfeng Nissan. Taking the 2016 Sunny as an example, its dimensions are 4456mm in length, 1696mm in width, and 1514mm in height, with a wheelbase of 2600mm, a minimum ground clearance of 116mm, and a fuel tank capacity of 41 liters. The 2016 Sunny is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 82kW and a maximum torque of 139Nm, paired with a CVT continuously variable transmission. The 2016 Sunny features a MacPherson strut front suspension and a torsion beam rear suspension.
3
3
Share

Where is the keyhole of the Baojun 510?

The keyhole of the Baojun 510 is located on the door handle. Remove the decorative cover on the door handle to reveal the keyhole. The functions of the key include: closing the windows after turning off the engine, easily locating the car in parking lots, automatically opening the trunk, remotely opening windows, and starting the vehicle. The Baojun 510 is a compact SUV with dimensions of 4220mm in length, 1740mm in width, and 1615mm in height, a wheelbase of 2550mm, and a fuel tank capacity of 45 liters. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 99 PS, a maximum torque of 135 Nm, and a maximum power of 73 kW, paired with a 6-speed manual transmission.
8
5
Share

What to Do When the Car Windows Fog Up While Using Air Conditioning Inside?

Solutions for fogging up car windows while using air conditioning inside are as follows: 1. Purchase specialized defogging products: While cleaning glass dirt, they also form a thin transparent protective film on the glass, which can prevent water vapor from condensing on the glass and forming a fog layer. 2. Open windows for convection: As the temperature inside the car gradually approaches the outside temperature, the fog will dissipate. 3. Use the air conditioning system: Turn on the car's fan and cooling or heating switch, so that cold or warm air blows onto the glass, quickly dispersing the fog with fast and direct results. Cause of fogging: When the temperature inside the car is low and the outside temperature is high, water vapor condenses into water on the glass.
18
0
Share

How to Open the Front Hood of BYD Yuan?

The method to open the front hood of BYD Yuan is as follows: First, pull a handle located inside the cabin, which is positioned under the steering wheel near the left foot area. You will hear a clunk sound from the front hood when pulling it. Then, you need to go outside and release a latch located under the front hood, specifically in the gap towards the right side of the front hood's lower edge. Once released, the hood can be opened. The BYD Yuan is a compact SUV produced by BYD, with dimensions of 4360mm in length, 1785mm in width, and 1650mm in height, and a wheelbase of 2535mm. The front suspension of the BYD Yuan is a MacPherson strut independent suspension, while the rear suspension is a torsion beam non-independent suspension.
15
3
Share

Where is the engine number located on the Beidou Star?

The engine number of the Beidou Star can be found on the engine block. For the 1.4L engine, the engine number is located on the right side under the air filter box in the engine compartment, on the engine block at the junction of the engine and transmission. For the 1.0L engine, the engine number is positioned at the lower part of the engine near the oil pan. The engine model is an identification code assigned by the engine manufacturer in accordance with relevant regulations, corporate or industry practices, and the attributes of the engine. It represents information such as the manufacturer, specifications, performance, features, technology, purpose, and production batch of the engine, including details like fuel type, number of cylinders, displacement, and static braking power. Engines installed in passenger cars or multi-purpose vehicles are required to display the professional manufacturer, model, and production number of the engine. It is important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer's range, and multiple engines can share the same model. The engine number, however, is the unique production number assigned to each individual engine, and no two engines will have the same number. Composition of the engine number: Prefix: Includes product series codes, generation symbols, and regional or corporate codes. Manufacturers may choose appropriate letters as needed, but these must be approved and recorded by the industry standard regulatory body. Middle section: Consists of symbols for the number of cylinders, cylinder arrangement, stroke, and cylinder diameter. Suffix: Composed of symbols indicating structural features and usage characteristics. End: Distinguishing symbols. When differentiation is needed due to improvements or other reasons within the same product series, manufacturers may select appropriate symbols to indicate this. The suffix and end can be separated by a hyphen (-).
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.