What does the Audi fault TPMS repair mean?

How to Resolve Automatic Emergency Braking System Malfunction in New Cars?

New car automatic emergency braking system malfunctions can be resolved as follows: wiring or poor contact issues. Use a digital multimeter to check whether the circuit voltage is normal, and look for any loose connections or wiring problems that may require circuit repair. Dirty radar sensors may cause false alarms. Inspect whether the radar sensor is dirty, such as being blocked by mud, catkins, or similar debris on the millimeter-wave radar, which prevents it from identifying the distance of obstacles ahead, leading to limited automatic emergency braking function. You can wipe it clean with a tissue or cloth, and the fault should clear once you get back in the car. Millimeter-wave radar sensor issues. Check whether the power plug of the millimeter-wave radar sensor is loose. After unplugging it, inspect the pins inside for signs of corrosion or detachment, which can cause poor contact in the millimeter-wave radar sensor, resulting in abnormal data transmission and malfunctions. If the radar sensor has an internal fault, it needs replacement. Control module unit failure. Use a computer to read the data from the control module to determine if there are any abnormalities that prevent the millimeter-wave radar and camera from functioning normally, leading to malfunctions. Replace the control module at an auto repair shop.

9

1

Share

What is the fuel tank capacity of Toyota vehicles?

Toyota's fuel tank capacity ranges between 50 liters and 138 liters. The Toyota Allion has a fuel tank capacity of 50 liters. This data is officially published, and owners of the Toyota Allion can also check it on the vehicle's specification sheet. The Toyota Allion requires 92-octane fuel. Its fuel consumption is 5.7-6.0L per 100 kilometers, and a full tank can cover a distance of 833-877km. The Land Cruiser has a fuel tank capacity of 138 liters. This data is officially published, and owners of the Land Cruiser can also check it on the vehicle's specification sheet. The Land Cruiser requires 95-octane fuel, with a fuel consumption of 13.6-14.7L per 100 kilometers. A full tank can cover a distance of 939 to 1015km. The Land Cruiser (also known as Land Cruiser Prado) has a fuel tank capacity of 138 liters. This data is officially published, and owners can also check it on the vehicle's specification sheet. The Land Cruiser (Prado) requires 95-octane fuel, with a fuel consumption of 13.6 to 14.7L per 100 kilometers. A full tank can cover a distance of 939 to 1015km. During daily driving, it is essential to monitor the remaining fuel in the tank. This is typically done by observing the fuel gauge inside the vehicle. If there are no issues, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel midway. During actual refueling, the amount of fuel added may exceed the marked capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safety limit. There is additional space from the safety limit to the tank opening, which is designed to accommodate fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.

20

0

Share

Can You Still Drive If the Car's CV Joint Is Broken?

You cannot drive if the car's CV joint is broken. The CV joint is located on the car's chassis and serves to connect the driveshaft to the wheels. Essentially, it functions as a universal joint, ensuring continuous power transmission to the wheels regardless of direction (primarily when the wheels bounce). If damaged, power transmission may be interrupted, and even if the car can still move, the steering may become misaligned. Below are additional details: 1. CV Joint Inspection: Check the entire front axle's driveshaft CV joint for any play. Excessive play in the CV joint can cause slight wheel vibration during acceleration. There will also be a noticeable power transfer process when releasing the throttle. You can also manually inspect by firmly gripping the driveshaft and quickly twisting it back and forth to check for any play. New CV joints are typically tight-fitted with almost no noticeable play, at least not detectable by hand. 2. Advantages of CV Joints: The CV joint boot is filled with high-temperature-resistant lubricating grease (molybdenum disulfide), which appears dark blue. Its key feature is maintaining good form and lubrication even under high-temperature conditions, something regular grease cannot achieve.

10

0

Share

How long is the BMW 740 in meters?

The BMW 740 has a body length of 5273mm, a width of 1902mm, a height of 1498mm, and a wheelbase of 3210mm. These are official figures. The length of the BMW 740 refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the vehicle. The width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle. The height refers to the distance between the highest point of the vehicle and its supporting plane. In terms of power, the BMW 740 comes with four different turbocharged engines across its models: 2.0T, 3.0T, 6.6T, and 4.4T, with the 6.6T and 4.4T being twin-turbocharged. All engines feature direct fuel injection technology and use aluminum alloy cylinder heads and blocks. The 2.0T engine delivers a maximum power of 195kW and a maximum torque of 400Nm, with a power peak between 5000-6500 rpm and torque peak between 1550-4500 rpm. The 3.0T engine delivers a maximum power of 250kW and a maximum torque of 450Nm, with a power peak between 5500-6500 rpm and torque peak between 1500-5200 rpm. The 6.6T engine delivers a maximum power of 430kW and a maximum torque of 850Nm, with a power peak between 5250-5750 rpm and torque peak between 1600-4500 rpm. The 4.4T engine delivers a maximum power of 390kW and a maximum torque of 750Nm, with a power peak between 5500-6000 rpm and torque peak between 1800-4600 rpm. National regulations on vehicle dimensions stipulate that, according to the national standard "GB1589-89," the total width of a vehicle excludes side mirrors. The width limitation ensures sufficient lateral clearance for overtaking between adjacent lanes. This means that, under national standards, the significance of vehicle width data lies in providing adequate space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet public road usage requirements.

11

5

Share

Can Gradient Color Wrapping Film Be Registered?

According to Article 6 of Chapter II of the "Road Traffic Safety Law," if the color change area of a motor vehicle does not exceed 30%, there is no need to register the change. Conversely, if it exceeds 30%, it must be registered and filed, and the change must be registered within 10 days after the vehicle's color is altered. Precautions for Vehicle Color Change: Before changing the color of a motor vehicle, it is necessary to consult the vehicle management office where the vehicle is registered to determine whether changing the vehicle's color is permitted in the region. If the region does not support this method, the registration procedure cannot be completed after the change, and the vehicle must be restored to its original color. Documents required for applying to change the body color of a motor vehicle: "Motor Vehicle Change Registration Application Form." Identity proof of the motor vehicle owner and agent. Motor vehicle registration certificate. Motor vehicle driving license. Additionally, according to the "Motor Vehicle Registration Regulations," owners are no longer required to apply to the vehicle management office in advance. They can first change the vehicle's color, install body kits, replace the engine, etc., and then apply to the vehicle management office for change registration. According to Article 10, registered motor vehicles must apply for change registration under the following circumstances: Change of body color. Replacement of the engine. Replacement of the body or frame. Replacement of the entire vehicle due to quality issues. Change of use nature, such as converting a commercial vehicle to a non-commercial vehicle or vice versa. The motor vehicle owner's residence moves out of or into the jurisdiction of the vehicle management office. Furthermore, according to Article 15 of the "Road Traffic Safety Law of the People's Republic of China": police cars, fire trucks, ambulances, and engineering rescue vehicles must be painted with designated patterns and equipped with alarms and signal lights as required. Other motor vehicles are prohibited from painting, installing, or using patterns, alarms, or signal lights that are specific to or resemble those of the aforementioned vehicles. Article 56 of the "Motor Vehicle Registration Regulations" states that if the body color is changed without registering the change as required, the traffic management department of the public security authority may issue a warning or impose a fine. The vehicle may also be impounded and required to be restored to its original color.

19

0

Share

Solutions for Chery Arrizo 7e Charging Faults?

Arrizo 7e high-voltage faults can be resolved with the following methods: If it's not an issue with the high-voltage coil, then it's likely a problem with the oscillation power supply. First, check for any open circuits, then inspect the high-voltage wires and ignition coil. Verify whether the main relay ignition system power supply is normal and if the crankshaft position sensor signal is good. If the high-voltage coil is open-circuited, it can only be replaced. The Arrizo 7e is Chery's first mass-produced plug-in hybrid model. Externally, the Arrizo 7e is almost indistinguishable from the internal combustion engine version, with only two differences: a chrome strip above the grille designed in matte black and the badge at the rear, making the overall appearance not highly distinctive. The interior differences are even fewer, with seat stitching changed to light blue and minor variations in the dashboard details. In terms of power, the Arrizo 7 PHEV plug-in hybrid version is equipped with a plug-in hybrid system consisting of a 1.6L gasoline engine and an electric motor, paired with a CVT transmission. Its minimum fuel consumption is only 1.9L/100km, with a battery capacity of 9.2kWh and a pure electric driving range of over 50km. It does not come with a fast-charging interface; slow charging to full takes about 4 to 5 hours. The charging time is acceptable to most users. It's worth noting that the Arrizo 7e enjoys provincial and municipal subsidies in many cities.

15

4

Share

What does the Audi fault TPMS repair mean?

How to Resolve Automatic Emergency Braking System Malfunction in New Cars?

What is the fuel tank capacity of Toyota vehicles?

Can You Still Drive If the Car's CV Joint Is Broken?

How long is the BMW 740 in meters?

Can Gradient Color Wrapping Film Be Registered?

Solutions for Chery Arrizo 7e Charging Faults?

Anti-glare Rearview Mirror?

Which domestic scooter has the smallest displacement?

What impact does the implementation of China VI standards have on vehicles?

Car Window Won't Roll Up or Down?