What does the arrow on the LaCrosse car key mean?

2 Answers
VonEmersyn
07/24/25 2:36am
The arrow on the LaCrosse key is used for remote start. The LaCrosse key can be used for: Locking the doors: Press the button to lock the doors/tailgate and activate the anti-theft alarm. Hold the lock button to close all windows and the panoramic sunroof. Unlocking the tailgate: Press this button to unlock the tailgate. For models equipped with a power tailgate, hold this button to open the tailgate. Hold this button to close the opened tailgate. If you have selected the safety unlock setting for all doors, long-pressing the tailgate unlock button will also unlock both side doors. Remote engine start: First press the lock button, then directly hold the remote engine start button until the engine starts remotely. Press the remote engine start button twice in succession to deactivate this function.
Was this review help?
13
3
Share
PaigeFitz
08/10/25 10:13pm
I've been driving the Buick LaCrosse for several years, and the arrow button on the key fob means remote start. Press and hold it, and the car can remotely start the engine. I often use this function in winter—press it at home before going out, and the car interior will warm up in a few minutes; in summer, I turn on the air conditioning in advance to cool down, avoiding sweating when getting in the car. Buick designed this feature thoughtfully, especially for cold northern regions like ours, as it helps protect engine lubrication and prolongs engine life. When operating, make sure the car is within sight, the doors are locked, and for safety, avoid using it in garages or crowded areas. After confirming the remote start, the car lights will flash once and emit a beep as a prompt. Simple and practical, it's a great helper for enhancing driving comfort.
Was this review help?
8
4
Share
Expand All
More Forum Discussions

What are the reasons for a sudden stall in an electronically injected diesel vehicle?

Electronically injected engines may stall suddenly due to the following reasons:1. Fuel pump failure: A stuck or malfunctioning fuel pump can cause sudden fuel supply interruption, leading to vehicle stalling.2. Use of substandard fuel: Automatic transmission vehicles generally do not stall easily. If stalling occurs, the primary cause is often the use of substandard (non-compliant) fuel, resulting in engine carbon buildup and subsequent stalling.3. Simultaneous multi-cylinder failure: This could be due to spark plug or ignition coil failures, causing one or more cylinders to misfire, leading to stalling. However, stalling only occurs when multiple cylinders fail to ignite simultaneously, making this scenario possible but relatively unlikely.
13
1
Share

What are the reasons for decreased power and increased fuel consumption?

The reasons for decreased power and increased fuel consumption are as follows: 1. Fuel system issues: When the vehicle's power significantly decreases, it may be caused by fuel injection problems or poor atomization in the fuel system. In severe cases, it might even prevent the vehicle from starting. These issues are primarily due to excessive carbon buildup in the fuel injectors, which blocks the injector needle valve, leading to poor fuel injection or atomization. 2. Electrical system issues: Electrical problems mainly include wiring issues and spark plug problems. When there are wiring problems, it can affect the operation of certain sensors, which may also lead to these symptoms. Additionally, spark plug issues, such as excessive carbon buildup and aging, can also cause insufficient vehicle power. 3. Intake system problems: When the vehicle's intake system malfunctions, it results in insufficient air intake, preventing enough oxygen from mixing with fuel for complete combustion. This not only increases fuel consumption but also affects the vehicle's power.
8
4
Share

What Causes the Engine Yellow Warning Light and Car Shaking?

Reasons for the engine yellow warning light and car shaking: poor combustion of the air-fuel mixture, spark plug failure, and abnormal pressure. Poor Combustion of the Air-Fuel Mixture: When the air-fuel mixture in the cylinder is too rich, the vehicle may experience knocking and shaking. If the mixture is too lean, the vehicle may exhibit poor acceleration. Solution: When the engine warning light comes on and the car starts shaking, immediately stop the vehicle and call for a tow truck to await assistance. Spark Plug Failure: If the issue is not with the air-fuel mixture, it could be due to problems with the spark plugs, high-voltage wires, or ignition coils. Poor performance of the ignition system or weak spark plug firing can also cause the engine warning light to illuminate and result in shaking and insufficient power. Solution: If such a problem is detected, check for any abnormalities in the spark plugs and have them inspected thoroughly at a professional repair shop. Abnormal Pressure: This can be caused by abnormal fuel supply pressure or a faulty intake pressure sensor. Incorrect fuel pump pressure or erroneous readings and poor performance of the intake pressure sensor can lead to car shaking and power loss. Solution: First, stop the vehicle immediately and check if the engine oil level is sufficient, then proceed to a professional repair shop for maintenance.
1
4
Share

Where is the gear position switch located?

For manual transmissions, the reverse gear switch is located on top of the transmission in the engine compartment. For automatic transmissions, the gear position switch is situated beneath the gear lever. Here's relevant information: 1. Shift lock button: Automatic gear levers feature a shift lock button to prevent accidental operation and potential safety hazards. This button must be pressed when moving out of P (Park) position or shifting into R (Reverse) or P (Park). 2. S stands for Sport mode: When engaged, this mode allows free gear shifting while delaying shift timing to maintain higher engine RPM, thereby increasing vehicle power. Note that using this mode will significantly increase fuel consumption.
5
4
Share

What are the consequences of driving with the electronic parking brake engaged?

Here is a detailed introduction to the consequences of driving with the electronic parking brake engaged: 1. Degree of engagement and driving distance: If the parking brake is not engaged tightly and the driving distance is short, the impact on the car is minimal, but there will be increased wear on the parking brake pads and higher fuel consumption. 2. Tight engagement: If the parking brake is engaged tightly and not noticed, or if the car is driven at high speed over a long distance, the parking brake pads can wear out severely, potentially reaching the point of needing replacement after just one instance. Excessive wear and heat generation from the brake pads can cause smoke and a burning smell. The heat can also transfer to surrounding components, and high temperatures may reduce the strength of these parts or even cause deformation. 3. Assessing the outcome: If there is no smoke or strong burning smell, there is likely no issue, and no inspection is needed. However, if there is a strong burning smell and visible smoke, check whether the parking brake still functions properly—whether it releases fully when disengaged, whether the engagement force is the same as before, and whether it can still hold the car on a slope.
3
0
Share

How to Check the Owner of a License Plate Number?

Methods to check the owner of a license plate number: 1. Search for the vehicle management office online, then click to enter the online vehicle management office, and then click to enter the vehicle information inquiry; 2. Input the type of license plate and the license plate number that need to be queried, and click the query; 3. The inquirer can determine whether this is the vehicle they need to query through the body color, vehicle brand, driver, file number and other related vehicle information; 4. The person who needs to inquire can go to the insurance company with valid documents, and apply to find the owner according to the other party's license plate number reporting method. However, due to the protection of the owner's information by the insurance company, the required procedures will be more cumbersome.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.