What does the ACC adaptive cruise control system mean?

2 Answers
LillianMarie
07/28/25 5:15pm
ACC adaptive cruise control system incorporates radar monitoring, distance judgment, intelligent speed control, etc., which also includes lane departure warning and pre-collision systems. Below is more information about the ACC adaptive cruise control system: 1. The ACC adaptive cruise control can adjust its own speed based on the speed of the vehicle in front. If the vehicle ahead accelerates, it will follow suit, and if it decelerates, it will also slow down. 2. The speed can be set via buttons, and the distance to maintain from the vehicle ahead can also be adjusted. 3. There are also points to note about the ACC adaptive cruise control system: it cannot recognize rapidly moving objects, and it cannot identify vehicles moving laterally or oncoming traffic; slow-moving or stationary objects, such as bicycles or pedestrians, are also not recognized.
Was this review help?
11
2
Share
TeaganLynn
08/11/25 11:37pm
The ACC (Adaptive Cruise Control) system is an intelligent driving assistance feature that allows the car to automatically adjust its speed based on the vehicle ahead, maintaining a safe distance. I find it quite convenient on highways—for example, after setting a speed, it accelerates or decelerates to follow the car in front. Unlike traditional cruise control, it doesn’t require manual braking. The benefits are clear: no more foot cramps during hot weather or long drives, plus it helps avoid rear-end collisions. The system typically uses radar or a front-mounted camera to detect the distance to the vehicle ahead, and operation is simple—just press a button to activate. However, don’t rely on it too much, as its sensing capabilities may decline in heavy rain. Overall, ACC makes driving easier and safer.
Was this review help?
16
5
Share
Expand All
More Forum Discussions

What are the reasons for an automatic shutdown of a gasoline engine?

Gasoline engines may shut down automatically due to fuel depletion or fuel line blockage. Below is relevant information about gasoline engines: 1. Introduction: A gasoline engine is an internal combustion engine that converts thermal energy into mechanical energy using gasoline as fuel. Due to gasoline's low viscosity and rapid evaporation characteristics, fuel injection systems can spray gasoline into the cylinders. After compression reaches certain temperature and pressure levels, spark plugs ignite the mixture, causing gas expansion that performs work. 2. Characteristics: Gasoline engines feature high rotational speeds, simple structures, lightweight designs, low manufacturing costs, smooth operation, and convenient maintenance. They are widely used in automobiles, particularly in small vehicles.
15
3
Share

Will a 3M adhesive spoiler fall off over time?

A 3M adhesive spoiler will not fall off even after a long time. Here are the methods to remove a 3M adhesive spoiler: 1. Adhesive softening: Use a hairdryer to slowly heat and soften the adhesive, then wipe it off with an eraser or use an adhesive remover. The adhesive remover can easily remove various types of adhesive residues. It can also peel off adhesive labels stuck on car windows, body surfaces, paint surfaces, glass, marble surfaces, etc. 2. Removing paste: It can also easily remove residual paste substances left after tearing off glass glue, asphalt, or adhesive labels with just a spray and wipe. Before use, shake the can well. Do not invert the can when spraying the product. Slightly peel off the adhesive label. 3. Removing adhesive labels: Spray the product evenly from 20 to 40 centimeters away from the paper adhesive label. After the solution soaks in, gently peel off the adhesive label.
6
0
Share

What Causes Car Compressor Refrigerant Leakage?

The cause of car compressor refrigerant leakage is due to pipeline sealing issues and corrosion of the condenser and evaporator. Below is a detailed introduction to the repair methods for car air conditioning refrigerant leaks: 1. Welding Repair: After identifying the leak point, welding can be used to repair cracks and pinholes in the air conditioning pipes. If the pipe cannot be repaired, it must be replaced. 2. Vacuum Exhaust: After confirming that the repaired air conditioning pipe no longer leaks, vacuum exhaust must be performed. This involves removing all gas and moisture from the air conditioning pipeline. 3. Replenishing Refrigerant: After vacuum exhaust, the air conditioning system must be replenished with new refrigerant.
11
0
Share

What are the solutions for a loud engine sound?

Solutions for a loud engine sound are as follows: 1. Loose belt: Check if the belt is loose, as a loose belt can cause the sound in the engine compartment to become louder. If you cannot identify the issue, it is recommended to visit a 4S shop or a professional repair shop for inspection. 2. Aging phenomenon: When the engine noise is significant, it is usually due to aging inside the engine, which leads to increased vibration and noise during operation. When the engine noise becomes louder, you can start by cleaning the engine to remove accumulated dust inside, effectively reducing the engine noise.
17
5
Share

How to Distinguish Between Intake and Exhaust Camshaft Letters?

I stands for intake, E stands for exhaust. Below is a related introduction on how to distinguish between intake and exhaust camshafts: 1. You can differentiate them by looking at the screw position and belt position on the camshaft: The intake camshaft usually has a camshaft position sensor installed at the rear or front, making it longer, or there may be a signal disc at the tail. If you can't tell the difference, it's okay—just make a mark when disassembling, and you can basically identify them. 2. The camshaft is installed at the top of the cylinder head and is responsible for driving the intake and exhaust valves to open and close.
12
2
Share

Why Should Right-Turning Vehicles Yield to Left-Turning Vehicles?

Right-turning vehicles should yield to left-turning vehicles because the turning path of left-turning vehicle A is longer. If right-turning vehicle B does not yield to the left-turning vehicle, vehicle A would have to remain stopped in the middle of the intersection for a longer time, causing traffic congestion. Below are relevant introductions about road traffic regulations: 1. Penalty: According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," failing to yield as required results in a 3-point deduction. 2. Rules: (1) When there are traffic signs or markings, yield to the party with the right of way. (2) In the absence of traffic signs or markings, stop and observe before entering the intersection, yielding to vehicles coming from the right.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.