What does the AC MAX button in a vehicle mean?

1 Answers
Jace
07/29/25 7:56pm
The AC MAX button in a vehicle refers to the maximum air conditioning cooling setting. During summer when there is a significant temperature difference between the inside and outside of the car, it is not advisable to immediately set the air conditioning to a very low temperature upon entering. First, use high fan speed with natural air to disperse the hot air inside the cabin. Then, do not close all the windows completely. Turn on the air conditioning and allow your body to gradually adapt before adjusting the air conditioning to the desired temperature and closing the windows. This way, your body will not experience discomfort due to the sudden drop in external temperature. In southern winters, when using the air conditioning for heating, it is necessary to turn on the AC to utilize the compressor's cooling function to remove moisture from the air, reducing air humidity. Then, mix it with warm air to blow dry, hot air from the vents to prevent fogging on the car's interior glass.
Was this review help?
12
4
Share
More Forum Discussions

How to adjust the Hongqi H5 air conditioning to natural wind mode?

Method to adjust the Hongqi H5 air conditioning to natural wind mode: 1. Start the vehicle and wait until the engine coolant temperature reaches normal operating temperature; 2. Turn on the circulation mode and set it to internal circulation. Taking the 2020 automatic Zhilian Qichang version Hongqi H5 as an example, its body dimensions are: length 4945mm, width 1845mm, height 1470mm, wheelbase 2875mm, front track 1600mm, rear track 1590mm, and fuel tank capacity 58 liters. The 2020 automatic Zhilian Qichang version Hongqi H5 features MacPherson strut front suspension and multi-link rear suspension. It is equipped with a 1.8T turbocharged engine producing maximum power of 197 PS (145 kW) and maximum torque of 258 N·m, mated to a 6-speed automatic transmission.
4
4
Share

Which car brand features a lion emblem?

A car with a lion emblem represents the Dongfeng Peugeot brand, which is part of the Shenlong Automobile Co., Ltd. Its lineup includes models such as the Peugeot 4008 New Energy, Peugeot 408, Peugeot 508, Peugeot 4008, and Peugeot 5008. Taking the Peugeot 508 as an example, its body dimensions are: 4870mm in length, 1855mm in width, and 1455mm in height, with a wheelbase of 2848mm, a trunk capacity of 513 liters, and a curb weight of 1490kg. The Peugeot 508 features a MacPherson strut front suspension and a multi-link independent rear suspension. It is powered by a 1.6T turbocharged engine, delivering a maximum horsepower of 170PS, a maximum power of 125kW, and a maximum torque of 250Nm, paired with a 6-speed automatic transmission.
18
3
Share

Where is the Porsche VIN located?

The Porsche VIN is located on the nameplate at the upper left corner of the engine under the hood. Porsche models include: Porsche 911, Porsche 718, Taycan, Cayenne, Cayenne New Energy, etc. Taking the 2020 Cayenne as an example, its body dimensions are: length 4918mm, width 1983mm, height 1696mm, with a wheelbase of 2895mm and a fuel tank capacity of 90L. The 2020 Cayenne features a multi-link independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.9T naturally aspirated engine, delivering a maximum horsepower of 440PS, a maximum power of 324kW, and a maximum torque of 550Nm, paired with an 8-speed automatic manual transmission.
15
4
Share

Where is the fender located?

The fender is located at: 1. Above the front tires, between the front door, hood, and bumper; 2. Above the rear tires and behind the rear door. The function of the fender is: utilizing fluid dynamics to reduce the drag coefficient, making the vehicle run more smoothly. The fender is also called a wing panel, and can be divided into front fender and rear fender according to its position. The replacement method is: 1. Support the chassis with a jack, then remove the tire; 2. Remove the screws or clips fixing the fender liner, and take off the fender; 3. Clean the mud and sand under the fender, and install the new fender.
17
3
Share

What is the Function of Brake Fluid?

Brake fluid functions to transmit energy, dissipate heat, prevent corrosion and rust, as well as provide lubrication. The method to determine when brake fluid needs replacement is: when the water content in the brake fluid reaches 3%, it must be replaced immediately. The steps to replace brake fluid are: 1. Park the vehicle on level ground and turn off the engine, then open the hood and drain the remaining brake fluid; 2. Use a funnel to fill the reservoir with new brake fluid; 3. Press the brake pedal inside the car until the fluid level in the reservoir under the hood reaches the lower limit. Precautions for using brake fluid: 1. Avoid mixing with gasoline or engine oil; 2. Replace it regularly; 3. Choose high-quality brake fluid.
17
2
Share

What Does Brake Pad Wear Mean?

Brake pad wear refers to the severe deterioration of a vehicle's brake pads, at which point the warning light on the dashboard will illuminate, indicating the need for immediate replacement. The method for replacing brake pads is as follows: 1. Open the engine compartment and check the brake fluid level to prevent overflow during the replacement process; 2. Remove the wheel where the brake is located; 3. Unscrew the bolts of the brake caliper and remove the brake pads; 4. Install new brake pads, tighten the guide bolts, and complete the replacement. The working principle of brake pads is to utilize the friction between the brake pads and the brake drum, as well as between the tires and the ground, converting the kinetic energy of the moving vehicle into heat energy through friction, thereby bringing the car to a stop.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.