What does the 4x4 of the Mercedes-Benz G-Class mean?

What is the function of the intake manifold pressure sensor?

The intake manifold pressure sensor, abbreviated as MAP, is a key component in the D-type fuel injection system of gasoline engines. Its function is equivalent to that of an air flow meter, primarily used to measure the amount of air entering the engine and provide this data to the engine control computer as the basis for controlling fuel injection quantity and ignition timing. Below is more information about the intake manifold pressure sensor: 1. The working principle of the intake manifold pressure sensor involves measuring the absolute pressure in the intake pipe to determine air density. Combined with the engine's speed, it calculates the amount of air entering. This indicates that the manifold between the throttle and the intake valve in a typical engine is generally in a vacuum state. 2. Except for turbocharged engines, the intake power in ordinary gasoline engines comes from the suction of the pistons. In other words, the piston end is the active end, while the throttle is usually closed, leading to demand exceeding supply and thus creating a vacuum in the manifold. Even when the throttle is fully open, due to the resistance of air flow and certain lag, with the active end being the piston, a vacuum is still generated.

14

3

Share

How to Stop Car Wipers?

Rotate the car wiper to the OFF position to turn off the wipers. More details about the button functions are as follows: 1. OFF—The front wiper stops working, which is the off position of the car wiper. Rotate to this position to turn it off. 2. INT—Automatic intermittent operation. Pull the lever down one notch, and the wiper will start working automatically in intermittent mode. This setting requires manual reset. Suitable for light rain or snow. 3. LO—Continuous operation. Pull the lever down one more notch, and the wiper will work continuously at an automatic rate. This setting also requires manual reset and is suitable for heavier rain or snow. 4. HI—Continuous high-speed operation. Pull the lever all the way down, and the wiper will operate at high speed. This setting requires manual reset and is suitable for heavy rain. Generally, in heavy rain conditions, even setting the wiper to the highest speed may not be effective. The best approach is to turn on the hazard lights, pull over, and wait until the rain subsides before continuing.

7

1

Share

What grade of gasoline should the Bin Yue use?

The recommended gasoline grade for the Bin Yue is 92 octane. Below is relevant information about automotive fuel: 1. Before refueling, turn off the engine and ensure all doors and windows are closed. The fuel type should be unleaded gasoline, with ethanol-blended gasoline containing up to 10% ethanol allowed. 2. The fuel type is unleaded gasoline with an octane rating of 92. When using ethanol-blended gasoline, ensure the ethanol content does not exceed 10% and that the octane rating meets the above standard. 3. Frequently mixing gasoline from Sinopec and PetroChina brands may lead to carbon buildup and affect engine performance, as the two brands differ in refining processes, standards, and additives.

1

4

Share

Can I Keep My Original License Plate When Changing to a New Car?

You can keep your original license plate when changing to a new car, but the following three conditions must be met: 1. Apply in time. Within one year after transferring or deregistering the old car, the original license plate will be reserved for the owner. As long as you apply to the vehicle management office to use the original license plate during this period, you can transfer the original license plate to the newly purchased car or a used car. After one year, the license plate will be returned to the selection pool and made available to the public. 2. The original license plate must have been used for at least one year. Previously, the license plate had to be used for more than three years before it could be retained, so many car owners who wanted to change cars waited until the three-year period was over. Now, as long as it has been used for at least one year, you can apply to retain it. 3. Any violations or accidents involving the original car must be resolved. If you have committed any traffic violations or incurred fines while driving the original vehicle, you must pay all fines and resolve any outstanding accidents before applying to retain the original license plate number. Otherwise, you will lose ownership of the original license plate, and it will be reclaimed by the vehicle management office.

20

2

Share

Is it better to have the first maintenance at 3,000 kilometers or 5,000 kilometers?

The first maintenance at 3,000 kilometers is better. In fact, the items covered in the first maintenance are quite simple, mainly including changing the engine oil and oil filter, as well as some routine vehicle inspections, such as checking the wear on tires and brake pads, the levels of various fluids in the engine compartment, the level of antifreeze, lifting the vehicle to inspect the chassis for any signs of impact, and checking whether the chassis brackets and tie rods are deformed. The first maintenance is generally about checking if the car has any issues and changing the oil and filter. When performing maintenance, it's important to pay attention to the oil change—always opt for fully synthetic oil. Many car owners overlook this and end up using mineral oil, which is generally cheaper but inferior in performance compared to fully synthetic oil. Fully synthetic oil has a replacement cycle of up to around 10,000 kilometers, whereas mineral oil typically requires changing every 5,000 kilometers.

15

3

Share

Can points be deducted during the probationary period?

Points can be deducted during the probationary period, but not all 12 points. If the points deducted during the probationary period do not reach 12, the probationary period can be completed normally after paying the corresponding fines. However, if all 12 points are deducted during the probationary period, the probationary driving license for the corresponding vehicle type will be revoked. For a C1 driving license, as long as not all 12 points are deducted during the probationary period, the points will be reset to zero upon completion of the probationary period after paying the fines. If the fines are not paid, the points will automatically carry over to the next scoring cycle. The probationary period for a C1 license will not be extended. The extension of the probationary period only applies to Class A and B driving licenses. Drivers holding licenses for large buses, tractors, city buses, medium-sized buses, or large trucks who accumulate 6 or more points but less than 12 points during the one-year probationary period will have their probationary period extended by one year. If they again accumulate 6 or more points but less than 12 points during the extended probationary period, their probationary driving qualification for the corresponding vehicle type will be revoked.

17

2

Share

What does the 4x4 of the Mercedes-Benz G-Class mean?

What is the function of the intake manifold pressure sensor?

How to Stop Car Wipers?

What grade of gasoline should the Bin Yue use?

Can I Keep My Original License Plate When Changing to a New Car?

Is it better to have the first maintenance at 3,000 kilometers or 5,000 kilometers?

Can points be deducted during the probationary period?

Does Forgetting to Press the Clutch When Shifting Gears Affect the Car?

What is the difference between spoon lights and angel eyes?

What are the body dimensions of the Beidou Star?

Does Pressing the Clutch Before Braking Harm the Car?