What does the 14t road sign mean?

2 Answers
OBrielle
07/29/25 5:41am
The 14t road sign indicates that the road or bridge is designed to bear a load of 14 tons. Road signs are markers that indicate road conditions and serve as guideposts for travelers, typically in the form of poles with directional signs. In traffic terminology, 't' stands for the abbreviation of the English word 'ton,' meaning a unit of weight. If this sign is present, it signifies the maximum allowable total weight limit for vehicles passing through that section of the road or bridge. Road traffic signs are markers set up by the vast majority of countries to warn, prohibit, restrict, or guide road users. Originating from Europe, international road traffic signs aim to bridge the gap caused by differences in languages and scripts. The 'Road Traffic Signs and Markings' (GB5768) standard categorizes road traffic signs into two main types: primary signs and auxiliary signs. Primary signs: Warning signs: Signs that alert drivers and pedestrians to potential hazards ahead. Prohibition signs: Signs that prohibit or restrict certain traffic behaviors by vehicles or pedestrians. Directional signs: Signs that indicate the direction of travel for vehicles and pedestrians. Guide signs: Signs that provide information about road directions, locations, and distances. Tourist area signs: Signs that indicate the direction and distance to tourist attractions. Road construction safety signs: Signs that notify road users of construction zones. Auxiliary signs: Signs that are attached below primary signs to provide additional explanatory information.
Was this review help?
16
1
Share
SanEverett
08/12/25 9:14am
As a veteran truck driver who's always on the road, let me tell you that this 14T sign is straightforward—it means the total vehicle weight shouldn't exceed 14 tons. With over 20 years of truck driving experience, I can tell you these signs are common at bridge entrances or fragile road sections. Overloading not only damages the vehicle but also ruins road conditions—just think about the dangers of tire wear or brake failure. Last year, I got fined 500 yuan for overloading in a small town and wasted half a day unloading. My advice? Pay attention to vehicle weight signs, load reasonably, and don't risk hauling extra cargo—safe driving is the real skill. Occasionally, rookies might overlook this, but roadside cameras will catch it easily. Next time you're on the road, check for other related signs like height or width limits—following them all saves hassle. Remember, overloading can wreck your vehicle and endanger lives, so stick to the rules for peace of mind.
Was this review help?
4
2
Share
Expand All
More Forum Discussions

How to Adjust Valve Clearance on a Four-Cylinder Engine?

Four-cylinder engine valve clearance adjustment methods are: 1. Single-cylinder adjustment method: Rotate the cylinder to be adjusted to its compression stroke top dead center; 2. Two-step adjustment method: Adjust all valves on the engine in two steps. The four-cylinder engine arrangement sequence features four cylinders aligned in a straight line, which is one of the cylinder arrangement types for internal combustion engines, commonly used in four-cylinder engines with displacements below 2.0 liters. A four-cylinder engine, also known as a 4-cylinder engine, is a machine capable of converting one form of energy into another more useful form. Its main components include the cylinder block, crankcase, cylinder head, and cylinder gasket, among others.
6
0
Share

Does Having Extra Children in the Car Count as Overcrowding?

Having extra children in the car does count as overcrowding. Below is an introduction to the hazards of driving with an overloaded vehicle: 1. Damage to road infrastructure: Since overloaded vehicles far exceed the design load of roads and bridges, they cause pavement damage, bridge fractures, and significantly shorten service life. 2. Increased danger: Overloaded vehicles have greater mass and inertia, leading to longer braking distances and higher risks. Severe overloading can cause tire blowouts, sudden swerving, brake failure, rollovers, and other accidents due to excessive tire load and deformation. Additionally, overloading affects the vehicle's steering performance, increasing the likelihood of accidents due to loss of control. 3. Traffic congestion: Overloaded vehicles cannot travel at normal speeds, occupying lanes for extended periods and directly affecting road traffic flow.
12
2
Share

What does 'off' mean inside the car?

In-car 'off' refers to the deactivation button for the vehicle stability control system. The vehicle stability control system is a general term for systems or programs that enhance vehicle handling performance while effectively preventing loss of control when the car reaches its dynamic limits. Its function is to improve vehicle handling safety and driving convenience. Common buttons and their functions in a car include: 1. Fuel tank release button: Remotely opens the fuel tank cap from inside the vehicle; 2. Parking sensor button: Turns the vehicle's parking sensor system on or off as needed; 3. Central locking button: Controls the vehicle's central door locking system; 4. Headlight washer button: Controls the automatic cleaning function for headlights.
3
5
Share

What Happens When a Car Battery Dies?

When a car battery dies, the following situations may occur: 1. Difficulty starting the car; 2. Headlights dim when decelerating; 3. The battery warning light turns on. Reasons for a dead car battery include: 1. The car has been parked for a long time; 2. The battery has reached the end of its lifespan; 3. Engine damage; 4. Insufficient battery electrolyte or leakage; 5. Blown fuse; 6. Corrosion of battery terminals. Methods to prevent a car battery from dying include: 1. Remember to turn off lights and audio systems before shutting off the engine; 2. Develop the habit of turning off the air conditioning before shutting off the engine; 3. Avoid long-term parking of the car; 4. Regularly clean the car battery; 5. Avoid using power-consuming configurations in the car after the engine is turned off.
10
5
Share

Where is the seat ventilation button on the Equinox?

The seat ventilation button on the Equinox is located in the center of the center console. Press it to activate the ventilation mode, and you can also adjust the seat temperature. Here are some relevant details about the Equinox: 1. In terms of configuration, the Equinox is expected to be equipped with a MyLink system featuring a 7-inch or 8-inch screen, a panoramic camera, a forward collision warning system, low-speed automatic braking, lane keeping, one-button start, front seat heating and ventilation, among other features. 2. The principle of seat ventilation is to use a fan to inject air into the seat, which then flows out through small holes on the seat surface, achieving the ventilation function. 3. Seat ventilation effectively improves the air circulation between the human body and the seat surface, ensuring that even after long periods of sitting, the contact area between the body and the seat remains dry and comfortable.
4
4
Share

How to Properly Use the Exhaust Brake?

Correct steps for using the exhaust brake: 1. Activate the right-hand lever on the steering wheel combination switch by pulling it backward; 2. Turn on the exhaust brake switch, and the corresponding indicator light will illuminate. The exhaust brake is an auxiliary braking device designed to reduce or maintain vehicle speed without relying on or minimizing the use of the service brake, though it cannot bring the vehicle to an emergency stop. Precautions for using the exhaust brake: 1. Avoid using the exhaust brake on icy or slippery roads, as it may cause wheel slip or skidding; 2. The exhaust brake is an auxiliary braking system and cannot replace the service brake for emergency braking or be used as a parking brake, but it can be used simultaneously with the service brake; 3. When using the exhaust brake on long downhill slopes, select an appropriate gear to keep the engine speed between 1600 to 2400 rpm.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.